I need help installing GDAL 3.1.0 on my Windows 10 computer. I was pointed to download from here, http://download.gisinternals.com/sdk/downloads/release-1911-x64-gdal-mapserver.zip . I have unzipped and run sdkshell.bat and it takes me to a cmd window, my question is what comes next and how do I install it?
In case you still need it and haven't found the answer. sdkshell.bat create environment variable for gdal, so make sure you extract it in the folder you want it to be installed. After you run it, you can use gdal on cmd or powershell.
Related
When I launch the REDHAWK IDE via Eclipse, I cannot see the installed components (SigGen, fastFilter, etc). I can see the components just fine if I use the command line to create a project. I'm convinced it has to be a path or variable issues, but I just don't know what to reconfigure.
I'm using REDHAWK Version 2.1.0 and on CentOS7
OSSIEHOME is set to the /usr/local/redhawk/core
SDRROOT is set to /var/redhawk/sdr
Any suggestions?
I found a solution by reinstalling and including every Redhawk package that I could find using "yum list redhawk*"
I have the same problem and it turns out I was using a Java version higher than 8 which is not supported by RedHawk. Make sure you use Java 8 to launch the IDE otherwise it does not work. Submitted a DR but because JDK8 still supported they do not feel the need to fix it.
I followed the official installation instructions for RedHawk 2.3.0 on Centos 7.9 and had this same issue, I fixed it by opening a terminal in the Redhawk installation directory and running
sudo yum install redhawk-basic-components-2.3.0-5.el7.x86_64.rpm
After which the components appeared in the IDE without a restart
I tried to install rubyrep following their instructions on their website and the the files are not running for installation. I have the latest JVM and on Windows 7. The application I am using is using POSTGRE 9.3.
I was running the batch file generated from the folder rubyrep.bat or is there a way to run the installation ?
Can someone guide me or give me tip on troubleshooting this problem even though the installation is straight forward?
From the command line change into the directory where you have extracted the rubyrep zip file. You then just run rubyrep NOT rubyrep.bat as shown in the picture below.
I thought that the standalone PsychoPy install could coexist happily if Python was installed separately on the PC to but I can't get it to, nor can I find any docs. (I'm using Windows 7)
I have the lastest standalone version installed and the shortcut to run it is
"D:\Program Files (x86)\PsychoPy2\pythonw.exe" "D:\Program Files (x86)\PsychoPy2\Lib\site-packages\PsychoPy-1.81.02-py2.7.egg\psychopy\app\psychopyApp.py"
This works fine if my system env variables for PYTHONHOME & PYTHONPATH aren't set but I also use Python for other apps and need them setting to point to the other version of Python I have installed natively. When these env vars are set, Psychopy fails to load and gives no error messages at all.
Can anyone advise how I get them to play together nicely? (I thought it used to work last year, has something changed?)
[ I've tried a full uninstall of psychopy and freshly installed the latest standalone version v1.81.02
Yes, this is an unfortunate consequence of the way that PsychoPy is currently bundled with it's own closed environment in it's own python and dependencies installed seperately.
However, a new option to install psychopy using the conda package manager was introduced recently for Mac OS but some have also got it to work on Windows with a bit of tweaking.. Work is currently ongoing for this feature. I doubt that it was working previously unless you manually installed all dependencies in your default python, or ran linux:
On linux you can simply install psychopy from the neuro.debian repository, making it available for python system-wide. See PsychoPy documentation.
Thinking about it, I don't think it would ever worked if you had set PYTHONPATH (I don't know about PYTHONHOME).
BUT I did have a 'regular' python installation running alongside my Standalone PsychoPy install by not using the PYTHONPATH variable. You can add further paths to your python importing path (I assume that's the aim here) without setting any environment variable by adding text files ending in .pth to your site-packages directory. Essentially any lines in a .pth file that is found while navigating the existing path will also be added to the path!
Actually, according to the python docs you can also set a flag -E to ignore the environment variables:
https://docs.python.org/2/using/cmdline.html
To use that solution for the Standalone PsychoPy installation you'd have to alter the application shortcut to add this (that should get the app to load), but also make a couple of changes to the code for running scripts so that they also run with the flag set.
I still think not setting those variables is the easier solution though.
cheers,
Jon
I have installed Selenium 2 with Python on multiple machines but on one machine(Windows 7 64bit) I can not get it to install. I installed Pip or so I think. It exists in my scripts folder. I have made the enviorment variable path ;C:\Python27\Scripts per the instructions. I tryed to install the pip setup tool but it says it can not find Python in the registry. I believe I installed Python(I know I installed Pythion just not sure if its 32 or 64 and am not sure how to check.) for 64 bit was this a wrong move. When I install Selenium via pip install selenium I get an Importerror no entry load package?
actually i faced the same problem try to download the setuptools from that link
(setuptools-0.6c11.win32-py2.7.exe)
http://htpcbuild.com/htpc-software/python-setup-tools/python-setup-tools-install-guide/
and put the variable path ;c:\python27 .it worked for me that way
I just started to develop website with mono+asp.net mvc2 on mac osx but I am quite new to mono and mac.
I have got things working from MonoDevelop. My website is running ok with XSP when I run it from MonoDevelop.
Now, I am trying to test it from Apache server, but I don’t know how to set things up. Some instruction I can found are all very old or incomplete. I tried a few of them, but none worked.
Could anyone please help me out?
The best way to install mod_mono on OS X is from source. To do this there are a couple steps.
First, make sure you've installed XCode (which can be found on the DVD or the 2nd CD that came with the machine or the App Store) which will provide you with gcc and the rest of the standard toolchain.
Most of the normal in-between steps can be skipped, assuming you've already installed Mono and MonoDevelop from their stable release packages. If you encounter an error later on, you'll want to install updated versions of XSP and Mono and try again.
Next, download the latest stable release of mod_mono, extract the contents of the archive (by double clicking on the icon) and follow steps 1, 2 & 3 in the INSTALL file, and you should be good to go. This entire process took about ~5 minutes to get up and running :)
I am a novice with mono but followed some instructions. I downloaded and installed everything from here:
http://www.go-mono.com/mono-downloads/download.html
To get Apache to work with mod_mono.so I downloaded source from this page:
http://download.mono-project.com/sources/mod_mono/
You have to compile it. I went into the unpacked directory and wrote this in termminal:
./configure --prefix=/usr
make
sudo make install
This puts the mod_mono.so in correct Apache dir and the mod_mono.conf file. To include it you must add this to your httpd.conf (I put it at the end of the file):
# mod_mono_configuration
Include /etc/apache2/mod_mono.conf
MonoServerPath /Library/Frameworks/Mono.framework/Versions/Current/bin/mod-mono-server2