SELECT Stock.*
FROM Stock
WHERE (
(
(Stock.ComputerPartNumber) In (SELECT [ComputerPartNumber] FROM [Stock] As Tmp GROUP BY [ComputerPartNumber] HAVING Count(*)=2)
)
AND
(
(Stock.EquipmentName)="EquipmentA" Or (Stock.EquipmentName)="EquipmentB")
)
OR (
(
(Stock.ComputerPartNumber) In (SELECT [ComputerPartNumber] FROM [Stock] As Tmp GROUP BY [ComputerPartNumber] HAVING Count(*)=1)
)
AND (
(Stock.EquipmentName)="EquipmentA" Or (Stock.EquipmentName)="EquipmentB"
)
);
I am using the above SQL to achieve below 3 items:-
Find out all of the ComputerPartNumber which used by EquipmentA and/or EquipmentB only
Filter out the query result if the ComputerPartNumber used by equipment other than EquipmentA and EquipmentB.
If the ComputerPartNumber is used by both EquipmentA and EquipmentC, filter out the result also.
However the item 3 cannot be filtered out successfully. What should I do in order to achieve the item3?
Table and Query snapshots are attached. Thanks in advance!
Table
Query
What you need to do is to check if the total number of times a part is used in all pieces of Equipment is equal to the total number of times a part is used by either Equipment A or B:
SELECT S.StorageID, S.ComputerPartNumber, S.EquipmentName, S.Result
FROM Stock AS S
WHERE
(SELECT COUNT(*) FROM Stock AS S1 WHERE S1.ComputerPartNumber=S.ComputerPartNumber)
=(SELECT COUNT(*) FROM Stock AS S2 WHERE S2.ComputerPartNumber=S.ComputerPartNumber AND S2.EquipmentName IN("EquipmentA","EquipmentB"))
Regards,
You can use not exists:
select s.*
from stock as s
where not exists (select 1
from stock as s2
where s2.ComputerPartNumber = s.ComputerPartNumber and
s2.EquipmentName not in ("EquipmentA", "EquipmentB")
);
Related
I know that this question has been asked several times but I still cannot figure out why my query is returning values which are not duplicates. I want my query to return only the records which have identical value in the column Credit. The query executes without any errors but values which are not duplicated are also being returned. This is my query:
Select
_bvGLTransactionsFull.AccountDesc,
_bvGLAccountsFinancial.Description,
_bvGLTransactionsFull.TxDate,
_bvGLTransactionsFull.Description,
_bvGLTransactionsFull.Credit,
_bvGLTransactionsFull.Reference,
_bvGLTransactionsFull.UserName
From
_bvGLAccountsFinancial Inner Join
_bvGLTransactionsFull On _bvGLAccountsFinancial.AccountLink =
_bvGLTransactionsFull.AccountLink
Where
_bvGLTransactionsFull.Credit
IN
(SELECT Credit AS NumOccurrences
FROM _bvGLTransactionsFull
GROUP BY Credit
HAVING (COUNT(Credit) > 1 ) )
Group By
_bvGLTransactionsFull.AccountDesc, _bvGLAccountsFinancial.Description,
_bvGLTransactionsFull.TxDate, _bvGLTransactionsFull.Description,
_bvGLTransactionsFull.Credit, _bvGLTransactionsFull.Reference,
_bvGLTransactionsFull.UserName, _bvGLAccountsFinancial.Master_Sub_Account,
IsNumeric(_bvGLTransactionsFull.Reference), _bvGLTransactionsFull.TrCode
Having
_bvGLTransactionsFull.TxDate > 01 / 11 / 2014 And
_bvGLTransactionsFull.Reference Like '5_____' And
_bvGLTransactionsFull.Credit > 0.01 And
_bvGLAccountsFinancial.Master_Sub_Account = '90210'
That's because you're matching on the credit field back to your table, which contains duplicates. You need to isolate the rows that are duplicated with ROW_NUMBER:
;WITH CTE AS (
SELECT *, ROW_NUMBER() OVER(PARTITION BY CREDIT ORDER BY (SELECT NULL)) AS RN
FROM _bvGLTransactionsFull)
Select
CTE.AccountDesc,
_bvGLAccountsFinancial.Description,
CTE.TxDate,
CTE.Description,
CTE.Credit,
CTE.Reference,
CTE.UserName
From
_bvGLAccountsFinancial Inner Join
CTE On _bvGLAccountsFinancial.AccountLink = CTE.AccountLink
WHERE CTE.RN > 1
Group By
CTE.AccountDesc, _bvGLAccountsFinancial.Description,
CTE.TxDate, CTE.Description,
CTE.Credit, CTE.Reference,
CTE.UserName, _bvGLAccountsFinancial.Master_Sub_Account,
IsNumeric(CTE.Reference), CTE.TrCode
Having
CTE.TxDate > 01 / 11 / 2014 And
CTE.Reference Like '5_____' And
CTE.Credit > 0.01 And
_bvGLAccountsFinancial.Master_Sub_Account = '90210'
Just as a side note, I would consider using aliases to shorten your queries and make them more readable. Prefixing the table name before each column in a join is very difficult to read.
I trust your code in terms of extracting all data per your criteria. With this, let me have a different approach and see your script "as-is". So then, lets keep first all the records in a temp.
Select
_bvGLTransactionsFull.AccountDesc,
_bvGLAccountsFinancial.Description,
_bvGLTransactionsFull.TxDate,
_bvGLTransactionsFull.Description,
_bvGLTransactionsFull.Credit,
_bvGLTransactionsFull.Reference,
_bvGLTransactionsFull.UserName
-- temp table
INTO #tmpTable
From
_bvGLAccountsFinancial Inner Join
_bvGLTransactionsFull On _bvGLAccountsFinancial.AccountLink =
_bvGLTransactionsFull.AccountLink
Where
_bvGLTransactionsFull.Credit
IN
(SELECT Credit AS NumOccurrences
FROM _bvGLTransactionsFull
GROUP BY Credit
HAVING (COUNT(Credit) > 1 ) )
Group By
_bvGLTransactionsFull.AccountDesc, _bvGLAccountsFinancial.Description,
_bvGLTransactionsFull.TxDate, _bvGLTransactionsFull.Description,
_bvGLTransactionsFull.Credit, _bvGLTransactionsFull.Reference,
_bvGLTransactionsFull.UserName, _bvGLAccountsFinancial.Master_Sub_Account,
IsNumeric(_bvGLTransactionsFull.Reference), _bvGLTransactionsFull.TrCode
Having
_bvGLTransactionsFull.TxDate > 01 / 11 / 2014 And
_bvGLTransactionsFull.Reference Like '5_____' And
_bvGLTransactionsFull.Credit > 0.01 And
_bvGLAccountsFinancial.Master_Sub_Account = '90210'
Then remove the "single occurrence" data by creating a row index and remove all those 1 time indexes.
SELECT * FROM (
SELECT
ROW_NUMBER() OVER (PARTITION BY Credit ORDER BY Credit) AS rowIdx
, *
FROM #tmpTable) AS innerTmp
WHERE
rowIdx != 1
You can change your preference through PARTITION BY <column name>.
Should you have any concerns, please raise it first as these are so far how I understood your case.
EDIT : To include those credits that has duplicates.
SELECT
tmp1.*
FROM #tmpTable tmp1
RIGHT JOIN (
SELECT
Credit
FROM (
SELECT
ROW_NUMBER() OVER (PARTITION BY Credit ORDER BY Credit) AS rowIdx
, *
FROM #tmpTable) AS innerTmp
WHERE
rowIdx != 1
) AS tmp2
ON tmp1.Credit = tmp2.Credit
I'm trying to select max(count of rows).
Here is my 2 variants of SELECT
SELECT MAX(COUNT_OF_ENROLEES_BY_SPEC) FROM
(SELECT D.SPECCODE, COUNT(D.ENROLEECODE) AS COUNT_OF_ENROLEES_BY_SPEC
FROM DECLARER D
GROUP BY D.SPECCODE
);
SELECT S.NAME, MAX(D.ENROLEECODE)
FROM SPECIALIZATION S
CROSS JOIN DECLARER D WHERE S.SPECCODE = D.SPECCODE
GROUP BY S.NAME
HAVING MAX(D.ENROLEECODE) =
( SELECT MAX(COUNT_OF_ENROLEES_BY_SPEC) FROM
( SELECT D.SPECCODE, COUNT(D.ENROLEECODE) AS COUNT_OF_ENROLEES_BY_SPEC
FROM DECLARER D
GROUP BY D.SPECCODE
)
);
The first one is working OK, but I want to rewrite it using "HAVING" like in my second variant and add there one more column. But now 2nd variant don't output any data in results, just empty columns.
How can I fix it ? Thank YOU!)
This query based on description given in comments and some suggestions, so it may be wrong:
select -- 4. Join selected codes with specializations
S.Name,
selected_codes.spec_code,
selected_codes.count_of_enrolees_by_spec
from
specialization S,
(
select -- 3. Filter records with maximum popularity only
spec_code,
count_of_enrolees_by_spec
from (
select -- 2. Count maximum popularity in separate column
spec_code,
count_of_enrolees_by_spec,
max(count_of_enrolees_by_spec) over (partition by null) max_count
from (
SELECT -- 1. Get list of declarations and count popularity
D.SPECCODE AS SPEC_CODE,
COUNT(D.ENROLEECODE) AS COUNT_OF_ENROLEES_BY_SPEC
FROM DECLARER D
GROUP BY D.SPECCODE
)
)
where count_of_enrolees_by_spec = max_count
)
selected_codes
where
S.SPECCODE = selected_codes.spec_code
Also query not tested and some syntax errors are possible.
I have a postgresql query like this:
with r as (
select
1 as reason_type_id,
rarreason as reason_id,
count(*) over() count_all
from
workorderlines
where
rarreason != 0
and finalinsdate >= '2012-12-01'
)
select
r.reason_id,
rt.desc,
count(r.reason_id) as num,
round((count(r.reason_id)::float / (select count(*) as total from r) * 100.0)::numeric, 2) as pct
from r
left outer join
rtreasons as rt
on
r.reason_id = rt.rtreason
and r.reason_type_id = rt.rtreasontype
group by
r.reason_id,
rt.desc
order by r.reason_id asc
This returns a table of results with 4 columns: the reason id, the description associated with that reason id, the number of entries having that reason id, and the percent of the total that number represents.
This table looks like this:
What I would like to do is only display the top 10 results based off the total number of entries having a reason id. However, whatever is leftover, I would like to compile into another row with a description called "Other". How would I do this?
with r2 as (
...everything before the select list...
dense_rank() over(order by pct) cause_rank
...the rest of your query...
)
select * from r2 where cause_rank < 11
union
select
NULL as reason_id,
'Other' as desc,
sum(r2.num) over() as num,
sum(r2.pct) over() as pct,
11 as cause_rank
from r2
where cause_rank >= 11
As said above Limit and for the skipping and getting the rest use offset... Try This Site
Not sure about Postgre but SELECT TOP 10... should do the trick if you sort correctly
However about the second part: You might use a Right Join for this. Join the TOP 10 Result with the whole table data and use only the records not appearing on the left side. If you calculate the sum of those you should get your "Sum of the rest" result.
I assume that vw_my_top_10 is the view showing you the top 10 records. vw_all_records shows all records (including the top 10).
Like this:
SELECT SUM(a_field)
FROM vw_my_top_10
RIGHT JOIN vw_all_records
ON (vw_my_top_10.Key = vw_all_records.Key)
WHERE vw_my_top_10.Key IS NULL
Referring to the diagram below the records table has unique Records. Each record is updated, via comments through an Update Table. When I join the two I get lots of duplicates.
How to remove duplicates? Group By does not work for me as I have more than 10 fields in select query and some of them are functions.
Write a sub query which pulls the last updates in the Update table for each record that is updated in a particular month. Joining with this sub query will solve my problem.
Thanks!
Edit
Table structure that is of interest is
create table Records(
recordID int,
90more_fields various
)
create table Updates(
update_id int,
record_id int,
comment text,
byUser varchar(25),
datecreate datetime
)
Here's one way.
SELECT * /*But list columns explicitly*/
FROM Orange o
CROSS APPLY (SELECT TOP 1 *
FROM Blue b
WHERE b.datecreate >= '20110901'
AND b.datecreate < '20111001'
AND o.RecordID = b.Record_ID2
ORDER BY b.datecreate DESC) b
Based on the limited information available...
WITH cteLastUpdate AS (
SELECT Record_ID2, UpdateDateTime,
ROW_NUMBER() OVER(PARTITION BY Record_ID2 ORDER BY UpdateDateTime DESC) AS RowNUM
FROM BlueTable
/* Add WHERE clause if needed to restrict date range */
)
SELECT *
FROM cteLastUpdate lu
INNER JOIN OrangeTable o
ON lu.Record_ID2 = o.RecordID
WHERE lu.RowNum = 1
Last updates per record and month:
SELECT *
FROM UPDATES outerUpd
WHERE exists
(
-- Magic part
SELECT 1
FROM UPDATES innerUpd
WHERE innerUpd.RecordId = outerUpd.RecordId
GROUP BY RecordId
, date_part('year', innerUpd.datecolumn)
, date_part('month', innerUpd.datecolumn)
HAVING max(innerUpd.datecolumn) = outerUpd.datecolumn
)
(Works on PostgreSQL, date_part is different in other RDBMS)
I'm trying to find all duplicates in a Table and change one of their values.
Now i use:
SELECT Amount
FROM Bids
GROUP BY Amount, AuctionID
HAVING ( COUNT(Amount) > 1 ) AND (AuctionID=1)
The problem that it returns only
Amount
23.6500
41.8800
42.3500
And not
Amount
23.6500
23.6500
41.8800
41.8800
42.3500
42.3500
So I can't UPDATE all the rows.
How can I get it the way I showed?
Thanks,
Dan
Just wrap it inside an IN query:
SELECT Amount
FROM Bids
WHERE Amount IN (
SELECT Amount
FROM Bids
GROUP BY Amount, AuctionID
HAVING ( COUNT(Amount) > 1 ) AND (AuctionID=1)
)
UPDATE: added UPDATE statement
UPDATE Bids
SET Burned = 1
WHERE Amount IN (
SELECT Amount
FROM Bids
GROUP BY Amount, AuctionID
HAVING ( COUNT(Amount) > 1 ) AND (AuctionID=1)
)
Assume that you have Id in Bids table:
SELECT Amount
FROM Bids b1
WHERE AcutionId = 1
AND EXISTS (Select 1 from Bids b2
WHERE b2.AuctionID = b1.AuctionId
AND b1.Amount = b2.Amount
AND b1.Id <> b2.Id)
I'm curious to know why your original select doesn't satisfy your requirement. If for every member within a set of duplicates you're only selecting one of them, then you have one to update. It should be informative to add AuctionId to the select provided by Frank Schmitt to see what distinguishes these rows.