In a SQL function I can return a boolean if I do
with myquery as (delete from mytable where id = 'value1' returning 1)
select exists (select * from another_function('value2') where (select count(*) from myquery) > 0);
But in a plpgsql function it doesn't work and gives error query has no destination for result data.
In this function I want to execute another_function if any rows were actually deleted from mytable. The problem is I'm repeating the entire select exists part, because I'm using that in multiple functions.
Is it possible to move more of that logic into another_function? So that I can do something like this?
with myquery as (delete from mytable where id = 'value1' returning 1)
select * from another_function('value2', myquery)
How can I pass the CTE into a function so I don't need to repeat the select exists and where (select count(*) from myquery) > 0) every time I want to call another_function?
I would expect an auxiliary function to take an argument, such as the id being returned from the delete. It would then look like:
with d as (
delete from mytable
where id = 'value1'
returning id
)
select another_function('value2', d.id)
from d;
This operates one value at a time, but that is typically what one would want. If you wanted all ids passed in at once, you could use an array:
with d as (
delete from mytable
where id = 'value1'
returning id
)
select another_function('value2', array_agg(d.id))
from d;
Related
What I want to achieve is to have a switch case in the where clause. I want to test if this statement returns something, if it returns null, use this instead.
Sample:
SELECT [THIS_COLUMN]
FROM [THIS_TABLE]
WHERE (IF THIS [ID] RETURNS NULL THEN DO THIS SUBQUERY)
What I mean is that it will do this query first.
SELECT [THIS_COLUMN]
FROM [THIS_TABLE]
WHERE [ID] = 'SOMETHING'
If this returns NULL, do this query instead:
SELECT [THIS_COLUMN]
FROM [THIS_TABLE]
WHERE ID = (SELECT [SOMETHING] FROM [OTHER_TABLE]
WHERE [SOMETHING_SPECIFIC] = 'SOMETHING SPECIFIC')
Note that the expected results from the intended query varies from 30 rows up to 15k rows. Hope it helps.
Adding more information:
The results for this query will be used for another query but will just focus on this query.
Providing a real case scenario:
[THIS_COLUMN] is expected to have a list of VALUES.
[THIS_TABLE] contains the latest data only(let's say 1 year's worth of data) while the [OTHER_TABLE] contains the historical data.
What I want to achieve is when I query for a data that is not with in the 1 year's worth of data, IE 'SOMETHING' is not with in the 1 year scope(or in my case it returns NULL), I will use the other query where I query the 'SOMETHING_SPECIFIC'(Or may be 'SOMETHING' from the first statement makes more sense) from the historical table.
If I as reading through the lines correctly, this might work:
SELECT THIS_COLUMN
FROM dbo.THIS_TABLE TT
WHERE TT.ID = 'SOMETHING'
OR TT.ID = (SELECT OT.SOMETHING
FROM dbo.OTHER_TABLE OT
WHERE OT.SOMETHING_SPECIFIC = 'SOMETHING SPECIFIC'
AND NOT EXISTS (SELECT 1
FROM dbo.THIS_TABLE sq
WHERE sq.ID = 'SOMETHING'
AND THIS_COLUMN IS NOT NULL))
Note, however, that this could easily not be particularly performant.
You an use union all and not exists:
select this_column
from this_table
where id = 'something'
union all
select this_column
from this_table
where
not exists (select this_column from this_table where id = 'something')
and id = (select something from other_table where something_specific = 'something specific')
The first union member attempts to find rows that match the first condition, while the other one uses the subquery - the not exists prevents the second member to return something if the first member found a match.
90% of the time you can use a query-batch (i.e. a sequence of T-SQL statements) in a single SqlCommand object or SQL Server client session, so with that in-mind you could do this:
DECLARE #foo nvarchar(50) = (
SELECT
[THIS_COLUMN]
FROM
[THIS_TABLE]
WHERE
[ID] = 'SOMETHING'
);
IF #foo IS NULL
BEGIN
SELECT
[THIS_COLUMN]
FROM
[THIS_TABLE]
WHERE
[ID] = (
SELECT
[SOMETHING]
FROM
[OTHER_TABLE]
WHERE
[SOMETHING_SPECIFIC] = 'SOMETHING SPECIFIC'
)
END
ELSE
BEGIN
SELECT #foo AS [THIS_COLUMN];
END
That said, SELECT ... FROM ... WHERE x IN ( SELECT y FROM ... ) is a code-smell in a query - you probably need to rethink your solution entirely.
I have a select query that returns multiple rows, and I want to check if all rows are the same. So something like this:
anything_other_than(123) in (select id from foo)
So, if select id from foo returns 111,222,123,333 the statement above is false, and if select id from foo returns 123,123,123 it's true. How can I achieve this?
A simple solution is to use the = ALL operator:
SELECT 123 = ALL (SELECT id FROM foo);
This solution also stop scanning the result as soon as the first non-matching value is found.
Another option is to use EXISTS with a where condition:
select not exists (select *
from the_table
where id <> 123);
Run this:
select count(distinct id) = 1 and count(*) > 1 from foo;
count(distinct id) will return 1 if all the rows are the same
and count(*) will return the total number of rows.
If this returns true then you have more than 1 rows and all the rows are the same.
You can use something like this -
select x, IF(x > 1, "FALSE", "TRUE") from
(SELECT count(distinct(A.id)) as x FROM foo as A) as B;
Do refer this https://www.w3schools.com/sql/func_mysql_if.asp
I am writing down a view in SQL server (DWH) and the use case pseudo code is:
-- Do some calculation and generate #Temp1
-- ... contains other selects
-- Select statement 1
SELECT * FROM Foo
JOIN #Temp1 tmp on tmp.ID = Foo.ID
WHERE Foo.Deleted = 1
-- Do some calculation and generate #Temp2
-- ... contains other selects
-- Select statement 2
SELECT * FROM Foo
JOIN #Temp2 tmp on tmp.ID = Foo.ID
WHERE Foo.Deleted = 1
The result of the view should be:
Select Statement 1
UNION
Select Statement 2
The intended behavior is the same as the yield returnin C#. Is there a way to tell the view which SELECT statements are actually part of the result and which are not? since the small calculations preceding what I need also contain selects.
Thank you!
Yield return in C# returns rows one at a time as they appear in some underlying function. This concept does not exist in SQL statements. SQl is set-based, returning the entire result set, conceptually as a unit. (That said, sometimes queries run slowly and you will see rows returned slowly or in batches.)
You can control the number of rows being returns using TOP (in SQL Server). You can select particular rows to be returned using WHERE statements. However, you cannot specify a UNION statement that conditionally returns rows from some components but not others.
The closest you may be able to come is something like:
if UseTable1Only = 'Y'
select *
from Table1
else if UseTable2Only = 'Y'
select *
from Table2
else
select *
from table1
union
select *
from table2
You can do something similar using dynamic SQL, by constructing the statement as a string and then executing it.
I found a better work around. It might be helpful for someone else. It is actually to include all the calculation inside WITH statements instead of doing them in the view core:
WITH Temp1 (ID)
AS
(
-- Do some calculation and generate #Temp1
-- ... contains other selects
)
, Temp2 (ID)
AS
(
-- Do some calculation and generate #Temp2
-- ... contains other selects
)
-- Select statement 1
SELECT * FROM Foo
JOIN Temp1 tmp on tmp.ID = Foo.ID
WHERE Foo.Deleted = 1
UNION
-- Select statement 2
SELECT * FROM Foo
JOIN Temp2 tmp on tmp.ID = Foo.ID
WHERE Foo.Deleted = 1
The result will be of course the UNION of all the outiside SELECT statements.
I have a sql query that I run against a sql server database eg.
SELECT * FROM MyTable WHERE Id = 2
This may return a number of records or may return none. If it returns none, I would like to alter my sql query to return a default record, is this possible and if so, how? If records are returned, the default record should not be returned. I cannot update the data so will need to alter the sql query for this.
Another way (you would get an empty initial rowset returned);
SELECT * FROM MyTable WHERE Id = 2
IF (##ROWCOUNT = 0)
SELECT ...
SELECT TOP 1 * FROM (
SELECT ID,1 as Flag FROM MyTable WHERE Id = 2
UNION ALL
SELECT 1,2
) qry
ORDER BY qry.Flag ASC
You can have a look to this post. It is similar to what you are asking
Return a value if no rows are found SQL
I hope that it can guide you to the correct path.
if not exists (SELECT top 1 * FROM mytable WHERE id = 2)
select * from mytable where id= 'whatever_the_default_id_is'
else
select * from mytable where id = 2
If you have to return whole rows of data (and not just a single column) and you have to create a single SQL query then do this:
Left join actual table to defaults single-row table
select
coalesce(a.col1, d.col1) as col1,
coalesce(a.col2, d.col2) as col2,
...
from (
-- your defaults record
select
default1 as col1,
default2 as col2,
...) as d
left join actual as a
on ((1 = 1) /* or any actual table "where" conditions */)
The query need to return the same number of fields, so you shouldn't do a SELECT * FROM but a SELECT value FROM if you want to return a default value.
With that in mind
SELECT value FROM MyTable WHERE Id = 2
UNION
SELECT CASE (SELECT count(*) FROM MyTable WHERE Id = 2)
WHEN 0 THEN 'defaultvalue'
END
I need a SP to return multiple sets of results. The second set of results would be based on a column of the first set of results.
So:
declare #myTable1 table(field0 int,field1 varchar(255))
insert into #myTable1 select top 1 field0, field1 from table1
declare #myTable2 table(field0 int,field3 varchar(255))
insert into #myTable2
select field0, field3 from table2
where #myTable1.field0 = #myTable2.field0
How do return #myTable1 and #myTable2 with my SP? Is this syntax even right at all?
My apologies, I'm still a newbie at SQL...
EDIT:
So, I'm getting an error on the last line of the code below that says: "Must declare the scalar variable "#myTable1""
declare #myTable1 table(field0 int,field1 dateTime)
insert into #myTable1
select top 1 field0, field1
from someTable1 m
where m.field4 > 6/29/2009
select * from #myTable1
select *
from someTable2 m2
where m2.field0 = #myTable1.field0
If I highlight and run the code up until the second select * it works fine...
when I highlight the rest it acts like the first variable doesn't exist...
EDIT2:
Figured that problem out. Thanks guys.
declare #myTable1 table(field0 int,field1 dateTime)
insert into #myTable1
select top 1 field0, field1
from someTable1 m
where m.field4 > 6/29/2009
select * from #myTable1
select *
from someTable2 m2
where m2.field0 = (select field0 from #myTable1)
You pretty much just select two result sets
SELECT * FROM #myTable1
SELECT * FROM #myTable2
However, some tools will hide some results (e.g. pgAdmin will only show the last) and some tools have some sort of requirement to get to the next result set (e.g. .NET's IDataReader's will not allow you to Read() from the second resultset until you call NextResult()).
Edit:
An alternative in this case, since the types of the two results match, is to combine them into a single resultset:
SELECT field0, field1 from #myTable1
UNION
SELECT field0, field3 from #myTable2
You can also choose between UNION ALL or UNION DISTINCT (the default) where the latter will only send rows that aren't repeats.
At the end of the Stored Proc, put:
SELECT * FROM #myTable1
SELECT * FROM #myTable2
This will return 2 result sets.