I have a db with records like the following structure in the table;
id,msg,date,fid
19 ,"start","2012-02",NULL
20 ,"end","2012-03",19
21 , "start",2012-04,NULL
I have and entire db set up like this where the fid in some cases matches the id of another record. Id like to return all records that have matching start and end dates and just the start date if it doesn't have a corresponding end date fid like below:
19 ,"start","2012-02","end","2012-03"
21 , "start,"2012-04,"",NULL
I think you want a left join:
select t.fid, t.date as start_date, tf.date as end_date
from t left join
t tf
on tf.id = t.fid
where t.msg = 'start'
This assumes that there are only two types of records and fid is always non-NULL for 'end' records.
You just need a LEFT OUTER JOIN to your table. You can use an alias to refer to each instance:
SELECT startdt.id, startdt.msg, startdt.date, enddt.msg, enddt.date
FROM yourtable as startdt
LEFT OUTER JOIN yourtable as enddt
ON startdt.fid = enddt.id
AND enddt.msg = 'end'
WHERE startdt.msg = 'start'
Related
i want use ROJ in sql server with filter date but not work, i mean must return data table round null but not return how to fix problem ?
SQL Code
SELECT Lines.Target, COUNT(Round.ID) AS cnt
FROM Round RIGHT OUTER JOIN Line as Lines
on Round.Line = Lines.ID
WHERE Lines.Company = 20 AND
CAST(Round.System_Date AS DATE) BETWEEN
CAST('2019-03-01' AS DATE) AND CAST('2019-03-01' AS DATE)
GROUP BY Lines.Target
with out filter date code work
Must return =>
Target cnt
------ -----
7 0
9 0
15 0
Switch to LEFT JOIN. Move outer table condition from WHERE to ON to get true outer join result:
SELECT Lines.Target, COUNT(Round.ID) AS cnt
FROM Line as Lines
LEFT OUTER JOIN Round
on Round.Line = Lines.ID
AND CAST(Round.System_Date AS DATE) BETWEEN
CAST('2019-03-01' AS DATE) AND CAST('2019-03-01' AS DATE)
WHERE Lines.Company = 20
GROUP BY Lines.Target
Theres no BETWEEN required as its the same date you are searching for and make sure record exists for that specific date
Plus,
If you want the rounds table data being the master table then why you are using right outer join use Left Outer Join
So I have a query where if there are no matching join in the table it show zero which is what I want. However, if there are matching rows but they don't match the rows in the where clause, I don't get a zero I get nothing.
SELECT *
FROM PUEvents PUE1
OUTER APPLY (
SELECT day
FROM Day_Map
WHERE Date = '2014-04-12'
) D1
OUTER APPLY (
SELECT date
FROM Day_Map
WHERE Day = D1.Day AND
Year = '2013' AND
MapID > 976
) D2
LEFT JOIN PUConsumerData PUC ON PUC.EventID = PUE1.EventID
WHERE PUE1.EventID > 4958 AND
PUE1.EventId < 5023 AND
PUE1.TourID = 353 AND
(
CONVERT(DATE, PUC.PictureTakenDate) = '2014-04-12' OR
PUC.PictureTakenDate IS NULL
) AND
(
PUC.FirstName <> 'ZOOM' OR
FirstName IS NULL
)
ORDER BY PUE1.Name
So for row 51, there are rows in the database with that eventid but not for the date range so I don't get the event data. I need the event data just the fact there's no matching consumer data.
aaron-betrand was right if I move the conditions in the WHERE clause up to the JOIN it worked fine. Simple
I have a table called Member_Id which has a column in it called Member_ID_Type. The select statement below returns the value of another column, id_value from the same table. The join on the tables in the select statement is on the universal id column. There may be several entries in that table with this same universal id.
I want to adjust the select statement so that it will return the id_values for entries that have member_id_type equal to '7'. However if this is null then I want to return records that have member_id_type equal to '1'
So previously I had a condition on the join (commented out below) but that just returned records that had member_id_type equal to '7' and otherwise returned null.
I think I may have to use a case statement here but I'm not 100% sure how to use it in this scenario
SELECT TOP 1 cm.Contact_Relation_Gid,
mc.Universal_ID,
mi.ID_Value,
cm.First_Name,
cm.Last_Name,
cm.Middle_Name,
cm.Name_Suffix,
cm.Email_Address,
cm.Disability_Type_PKID,
cm.Race_Type_PKID,
cm.Citizenship_Type_PKID,
cm.Marital_Status_Type_PKID,
cm.Actual_SSN,
cm.Birth_Date,
cm.Gender,
mc.Person_Code,
mc.Relationship_Code,
mc.Member_Coverage_PKID,
sc.Subscriber_Coverage_PKID,
FROM Contact_Member cm (NOLOCK)
INNER JOIN Member_Coverage mc (NOLOCK)
ON cm.contact_relation_gid = mc.contact_relation_gid
AND mc.Record_Status = 'A'
INNER JOIN Subscriber_Coverage sc (NOLOCK)
ON mc.Subscriber_Coverage_PKID = sc.Subscriber_Coverage_PKID
AND mc.Record_Status = 'A'
LEFT outer JOIN Member_ID mi ON mi.Universal_ID = cm.Contact_Gid
--AND mi.Member_ID_Type_PKID='7'
WHERE cm.Contact_Relation_Gid = #Contact_Relation_Gid
AND cm.Record_Status = 'A'
Join them both, and use one if the other is not present:
select bt.name
, coalesce(eav1.value, eav2.value) as Value1OrValue2
from BaseTable bt
left join EavTable eav1
on eav1.id = bt.id
and eav1.type = 1
left join EavTable eav2
on eav2.id = bt.id
and eav2.type = 2
This query assumes that there is never more than one record with the same ID and Type.
Is it possible to pull values from 2 different tables based on the value of a column? For example, I have a table with a boolean column that either returns 0 or 1 depending on what the end user selects in our program. 0 means that I should pull in the default values. 1 means to use the user's data.
If my table Table1 looked like this:
Case ID Boolean
====================
1 0
2 1
3 1
4 0
5 0
Then I would need to pull Case IDs 1,4,and 5's corresponding data from table Default and Case IDs 3 and 4's corresponding data from table UserDef. Then I would have to take these values, combine them, and reorder them by Case ID so I can preserve the order in the resulting table.
I am fairly inexperienced with SQL but I am trying to learn. Any help or suggestions are greatly appreciated. Thank you in advance for your help.
Something like this:
SELECT
t1.CaseID
,CASE WHEN t1.Boolean = 1 THEN dt.Col1 ELSE ut.Col1 END AS Col1
,CASE WHEN t1.Boolean = 1 THEN dt.Col2 ELSE ut.Col2 END AS Col2
FROM Table1 t1
LEFT JOIN DefaultTable dt ON dt.CaseID = t1.CaseID
LEFT JOIN UserDefTable ut ON ut.CaseID = t1.CaseID
ORDER BY t1.CaseID
You join on both tables and then use CASE in SELECT to choose from which one to display data.
Option B:
WITH CTE_Combo AS
(
SELECT 0 as Boolean, * FROM Default --replace * with needed columns
UNION ALL
SELECT 1 AS Boolean, * FROM UserDef --replace * with needed columns
)
SELECT * FROM Table1 t
LEFT JOIN CTE_Combo c ON t.CaseID = c.CaseID AND t.Boolean = c.Boolean
ORDER BY t.CaseID
This might be even simpler - using CTE make a union of both tables adding artificial column, and then join CTE and your Table using both ID and flag column.
SELECT t1.CaseID,
ISNULL(td.data, tu.data) userData -- pick data from table_default
-- if not null else from table_user
FROM table1 t1
LEFT JOIN table_default td ON t1.CaseID = td.CaseID -- left join with table_default
AND t1.Boolean = 0 -- when boolean = 0
LEFT JOIN table_user tu ON t1.CaseID = tu.CaseID -- left join with table_user
AND t1.Boolean = 1 -- when boolean = 1
ORDER BY t1.CaseID
I have the following query:
SELECT sum((select count(*) as itemCount) * "SalesOrderItems"."price") as amount, 'rma' as
"creditType", "Clients"."company" as "client", "Clients".id as "ClientId", "Rmas".*
FROM "Rmas" JOIN "EsnsRmas" on("EsnsRmas"."RmaId" = "Rmas"."id")
JOIN "Esns" on ("Esns".id = "EsnsRmas"."EsnId")
JOIN "EsnsSalesOrderItems" on("EsnsSalesOrderItems"."EsnId" = "Esns"."id" )
JOIN "SalesOrderItems" on("SalesOrderItems"."id" = "EsnsSalesOrderItems"."SalesOrderItemId")
JOIN "Clients" on("Clients"."id" = "Rmas"."ClientId" )
WHERE "Rmas"."credited"=false AND "Rmas"."verifyStatus" IS NOT null
GROUP BY "Clients".id, "Rmas".id;
The problem is that the table "EsnsSalesOrderItems" can have the same EsnId in different entries. I want to restrict the query to only pull the last entry in "EsnsSalesOrderItems" that has the same "EsnId".
By "last" entry I mean the following:
The one that appears last in the table "EsnsSalesOrderItems". So for example if "EsnsSalesOrderItems" has two entries with "EsnId" = 6 and "createdAt" = '2012-06-19' and '2012-07-19' respectively it should only give me the entry from '2012-07-19'.
SELECT (count(*) * sum(s."price")) AS amount
, 'rma' AS "creditType"
, c."company" AS "client"
, c.id AS "ClientId"
, r.*
FROM "Rmas" r
JOIN "EsnsRmas" er ON er."RmaId" = r."id"
JOIN "Esns" e ON e.id = er."EsnId"
JOIN (
SELECT DISTINCT ON ("EsnId") *
FROM "EsnsSalesOrderItems"
ORDER BY "EsnId", "createdAt" DESC
) es ON es."EsnId" = e."id"
JOIN "SalesOrderItems" s ON s."id" = es."SalesOrderItemId"
JOIN "Clients" c ON c."id" = r."ClientId"
WHERE r."credited" = FALSE
AND r."verifyStatus" IS NOT NULL
GROUP BY c.id, r.id;
Your query in the question has an illegal aggregate over another aggregate:
sum((select count(*) as itemCount) * "SalesOrderItems"."price") as amount
Simplified and converted to legal syntax:
(count(*) * sum(s."price")) AS amount
But do you really want to multiply with the count per group?
I retrieve the the single row per group in "EsnsSalesOrderItems" with DISTINCT ON. Detailed explanation:
Select first row in each GROUP BY group?
I also added table aliases and formatting to make the query easier to parse for human eyes. If you could avoid camel case you could get rid of all the double quotes clouding the view.
Something like:
join (
select "EsnId",
row_number() over (partition by "EsnId" order by "createdAt" desc) as rn
from "EsnsSalesOrderItems"
) t ON t."EsnId" = "Esns"."id" and rn = 1
this will select the latest "EsnId" from "EsnsSalesOrderItems" based on the column creation_date. As you didn't post the structure of your tables, I had to "invent" a column name. You can use any column that allows you to define an order on the rows that suits you.
But remember the concept of the "last row" is only valid if you specifiy an order or the rows. A table as such is not ordered, nor is the result of a query unless you specify an order by
Necromancing because the answers are outdated.
Take advantage of the LATERAL keyword introduced in PG 9.3
left | right | inner JOIN LATERAL
I'll explain with an example:
Assuming you have a table "Contacts".
Now contacts have organisational units.
They can have one OU at a point in time, but N OUs at N points in time.
Now, if you have to query contacts and OU in a time period (not a reporting date, but a date range), you could N-fold increase the record count if you just did a left join.
So, to display the OU, you need to just join the first OU for each contact (where what shall be first is an arbitrary criterion - when taking the last value, for example, that is just another way of saying the first value when sorted by descending date order).
In SQL-server, you would use cross-apply (or rather OUTER APPLY since we need a left join), which will invoke a table-valued function on each row it has to join.
SELECT * FROM T_Contacts
--LEFT JOIN T_MAP_Contacts_Ref_OrganisationalUnit ON MAP_CTCOU_CT_UID = T_Contacts.CT_UID AND MAP_CTCOU_SoftDeleteStatus = 1
--WHERE T_MAP_Contacts_Ref_OrganisationalUnit.MAP_CTCOU_UID IS NULL -- 989
-- CROSS APPLY -- = INNER JOIN
OUTER APPLY -- = LEFT JOIN
(
SELECT TOP 1
--MAP_CTCOU_UID
MAP_CTCOU_CT_UID
,MAP_CTCOU_COU_UID
,MAP_CTCOU_DateFrom
,MAP_CTCOU_DateTo
FROM T_MAP_Contacts_Ref_OrganisationalUnit
WHERE MAP_CTCOU_SoftDeleteStatus = 1
AND MAP_CTCOU_CT_UID = T_Contacts.CT_UID
/*
AND
(
(#in_DateFrom <= T_MAP_Contacts_Ref_OrganisationalUnit.MAP_KTKOE_DateTo)
AND
(#in_DateTo >= T_MAP_Contacts_Ref_OrganisationalUnit.MAP_KTKOE_DateFrom)
)
*/
ORDER BY MAP_CTCOU_DateFrom
) AS FirstOE
In PostgreSQL, starting from version 9.3, you can do that, too - just use the LATERAL keyword to achieve the same:
SELECT * FROM T_Contacts
--LEFT JOIN T_MAP_Contacts_Ref_OrganisationalUnit ON MAP_CTCOU_CT_UID = T_Contacts.CT_UID AND MAP_CTCOU_SoftDeleteStatus = 1
--WHERE T_MAP_Contacts_Ref_OrganisationalUnit.MAP_CTCOU_UID IS NULL -- 989
LEFT JOIN LATERAL
(
SELECT
--MAP_CTCOU_UID
MAP_CTCOU_CT_UID
,MAP_CTCOU_COU_UID
,MAP_CTCOU_DateFrom
,MAP_CTCOU_DateTo
FROM T_MAP_Contacts_Ref_OrganisationalUnit
WHERE MAP_CTCOU_SoftDeleteStatus = 1
AND MAP_CTCOU_CT_UID = T_Contacts.CT_UID
/*
AND
(
(__in_DateFrom <= T_MAP_Contacts_Ref_OrganisationalUnit.MAP_KTKOE_DateTo)
AND
(__in_DateTo >= T_MAP_Contacts_Ref_OrganisationalUnit.MAP_KTKOE_DateFrom)
)
*/
ORDER BY MAP_CTCOU_DateFrom
LIMIT 1
) AS FirstOE
Try using a subquery in your ON clause. An abstract example:
SELECT
*
FROM table1
JOIN table2 ON table2.id = (
SELECT id FROM table2 WHERE table2.table1_id = table1.id LIMIT 1
)
WHERE
...