Hoping someone can give me some advice if possible.
We have a Linux box in our DMZ with the WebSphere plugin. This points to a Windows box running WebSphere Application Server.
httpd config only contains the default virtualhost with no ServerAlias specified. There is a redirect set up in the virtualhost in httpd.conf to forward any requests to service.domain.com to service.domain.com/wascontext1. Plugin-cfg.xml is set up with two uri groups, wascontext1 and wascontext2, but only 1 is actively used.
I want to use the Linux box as a reverse proxy for another application totally separate to WAS. It would have a different domain (i.e. dimsim.domain.com) but point to the same IP.
I was going to add another virtualhost for this but am unsure exactly how the WebSphere plugin will behave with it. From what I understand if I set this up and went to dimsim.domain.com/wascontext1 it would serve the WebSphere content as httpd forwards all requests to the plugin.
Is there a way to tell httpd to not send requests to the WebSphere plugin based on domain name or virtualhost? Or would doing a rewrite on any requests to dimsim.domain.com/wascontext be considered ok?
thanks
jc
EDIT: Thanks for the responses! I'll test changing the virtualhost name in plugin-cfg.xml on our second unused context and let you know how it goes.
A solution that doesn't require plugin-cfg.xml changes: If you use an Apache-based HTTP server, you can conditionally set the per-request variable "skipwas" to short-circuit the WAS Plugin processing.
e.g.
SetEnvIf Host ^dimsim\.domain\.com$ skipwas=1
If you look at the plugin-cfg.xml file, in the first part of the file you will find virtualhostgroup section similar to this:
<VirtualHostGroup Name="default_host">
<VirtualHost Name="*:9080"/>
<VirtualHost Name="*:9443"/>
<VirtualHost Name="*:443"/>
<VirtualHost Name="*:80"/>
</VirtualHostGroup>
just change the Name from * to the required domain name e.g. service.domain.com and then plugin will forward only requests for the service.domain.com hostname.
So something like:
<VirtualHost Name="service.domain.com:80"/>
should work for you.
When a request comes into the web server, it is passed to the WebSphere plugin and then plugin examines the request based on its configuration to determine if it should forward to WebSphere or pass back to the web server for further processing.
The "route" clauses in the plugin-cfg.xml are key to determining what will be forwarded and what will not. A request must match all the values in the route to be forwarded. A route contains virtual hosts, uris and clusters. The request must match one a virtual host from the VirtualHostGroup in the route, a URI from the UriGroup in the route and there must be an available server in the ServerCluster value of the route for the request to be sent to WebSphere.
Note-If you manipulate your plugin-cfg.xml for your setup, be aware that plugin is very sensitive about the format of this configuration and incorrect or invalid entries could cause a crash of the webserver. Be sure to backup the file and test before using in production. Also, if you modify your WebSphere configuration, it could overwrite this file and wipe out your changes.
Sorry for the late response.
covener's answer of setting the following does what I need.
SetEnvIf Host ^dimsim\.domain\.com$ skipwas=1
Related
I have the following question that I do not know how to solve it in the most efficient way.
I have two servers, one with Apache where I have a Wordpress instance responding for port 80, and on another server I have a Wildfly with another application listening on port 8080. The Wordpress that I have configured on the Apache server, responds to the URL http://www.somedomain.com What I'm not so clear about is how to do when a request arrives at http://www.somedomain.com/yyyy and redirects me to the Wildfly server where an application is responding to the URL : 8080 / app
How could I do it in the most effective way? Using the rewrite module in the .htaccess file or using the Apache proxy module and configuring it in the Apache virtual host? How would I have to do it?
Thank you very much in advance.
You're mixing a few things that are not related to each other. First of all, a redirect is something different than a proxy. Redirecting means asking the client (browser) to look at another URL. A proxy, on the other hand, retrieves the content of the other URL itself and passes it to the client. Using a proxy, the other URL remains invisible to the client.
Second, mod_rewrite is not limited to htaccess configuration. In fact it's better to configure mod_rewrite in the virtual host configuration, just as you suggested with the proxy configuration.
The htaccess is simply for users who are not allowed to mess with the server configuration itself. Configuration in the htaccess can be limited by the admin for security purposes at the cost of slowing down the server.
That said, if you are looking to map your wildfly server paths into your main server's paths, you might want to use something like this inside your main server's virtual host block:
<Location "/yyyy">
ProxyPass "http://wildfly:8080/app"
</Location>
See http://httpd.apache.org/docs/current/mod/mod_proxy.html#proxypass for detailed explanations.
Trying to get shibboleth working on a Docker container, using Apache as a reverse proxy. Problems occur because I am using port 80 for the public Apache instance and port 8000 for the internal instance, which confuses shibboleth:
2017-10-03 07:34:23 ERROR OpenSAML.MessageDecoder.SAML2POST [5]: POST targeted at (https://dashboard.hpc.unimelb.edu.au/Shibboleth.sso/SAML2/POST), but delivered to (https://dashboard.hpc.unimelb.edu.au:8000/Shibboleth.sso/SAML2/POST)
The first URL is the external URL which the end user sees. The second URL is what the docker container sees when it gets the proxied request (with the HTTP host name forwarded).
Note I used "ShibURLScheme https" on the internal apache instance to ensure it believes https is being used, as the reverse proxy ensures all requests are https.
Is there anyway I call tell Shibboleth that this is OK, the URLs really are the same? Maybe by rewriting the URL shibboleth sees or something?
Thanks
There are two things I would check:
Make sure the ServerName directive in your Apache conf file is set to
https://dashboard.hpc.unimelb.edu.au:80. Notice the :80. Omitting
the port number completely may work too. You want Apache and vis-a-vis, shibd to see the ServerName that the client is using. You should also make sure you have a UseCanonicalName On directive as part of this.
This is likely less of a problem, but make sure your sp-metadata given to the IdP is correct. You should add entries for the FQDN(s) that the client sees. Please note that most of that documentation page isn't applicable to your scenario, but adding the correct metadata entries is vital.
It looks like your ServerName in Apache isn't correct, so I'd start there.
My main domain is subdomain.domain.tld, and I want to rewrite all the traffic from subdomain1.domain.tld to the first one. Meaning if someone accesses subdomain1.domain.tld/whatever.php, he actually accesses subdomain.domain.tld/whatever.php, however, he's still shown subdomain1 in the browser's navigation bar.
I did some research, but I couldn't find something too promising.
You don't need rewriting for this, in fact internal rewriting is not possible between separate hosts...
Assuming that both "subdomains" (those are actually hostnames) are served by the same http server you can simply configure the same DocumentRoot for both hosts. That way they serve exactly the same file system which obviously means that the same scripts will be called.
Maybe you can get away even more simple if you just use the ServerAlias command for your virtual host. This obviously is only possible if you do not need separate configurations for both hosts.
Just take a look into the documentation of the apache http server. This is explained and good examples are offered:
https://httpd.apache.org/docs/2.4/vhosts/examples.html
In case those two hosts are not served by the same http server you could use an internal proxy setup: subdomain1.domain.tld acts as a front end proxy for subdomain.domain.tld, so it just relays all incoming requests and also the outgoing responses. That is easily done with a combination of the ProxyPass and the ProxyPassReverse rules offered by apaches proxy module: https://httpd.apache.org/docs/current/mod/mod_proxy.html#proxypassreverse
This setup can even be used if the two http servers operate on different IP addresses or even completely separate systems.
Tomcat in our application is considered back-and side and additionaly we have apache that fronting tomcat server as a reverse proxy and redirect requests to appropriate tomcat instance.
Now we need to set up HTTPS connection between apache proxy and tomcat for specific urls(Login, etc..). Tomcat documentation says that it's possible to achieve this with additional <Connector> within server.xml config.
In order to set up https over login page existing configuration with AJP protocol was replaced with the following:
ProxyPass /app/login/ https://127.0.0.1:6666/app/login/
All other urls specified like below:
ProxyPass /app/anyotherurl/ ajp://127.0.0.1:5555/app/anyotherurl/
With configuration below we expect that secure data (login/password) for login page will be encrypted and all other page will remain unchanged.
After the login apache should use normal ajp protocol because there is no sensetive information any more to protect. But it's not what actually happen in our case because for some reason apache is redirecting us to host specified in ProxyPass, namely to localhost.
This could happen due to the fact that our application while executing login logic on tomcat has two consecutive redirects.
We've tried to set ProxyPreserveHost on within virtual host to fix situation mentioned above, but we are not sure whether it is secure option and this one won't break another pages as well as we are not sure how it will work if tomcat will be located on other machine.
It would be good to know any other solution how such stuff can be applied internally for specific pages.
I have a server with several services running. One of them is accessible through the domain name like "https://www.foo.bar". Two other services are running on specific ports. So they are accessible through "https://www.foo.bar:1234".
Is it able to configure an apache2 server in a specific way, so it uses always the port 443 but with a different URL like "https://www.foo.bar/service1"?
Try ProxyPass, what you describe is a special case of a setup called Reverse Proxy: your httpd forwards requests to the other service and returns the answers to the client. (The other service happens to run on the same machine in your case, but it needn't. A simple kind of backend load-balancing can also be done this way.)
<Location /service1>
ProxyPass https://localhost:1234
ProxyPassReverse https://localhost:1234
</Location>
Be careful that your other service needs some rudimentary support for this kind of setup: if it returns HTML pages with links in it, it can't assume anymore that https://www.foo.bar:1234/foo/bar.html is the correct URL to tell the client. httpd will not look into the returned content and rewrite it for you.