I am getting this error while publishing my library to gemfury.
npm ERR! 503 Service Unavailable - PUT https://npm-proxy.fury.io/<username>/#<scope>%2f<package-name>
Please ensure to use the full access token which will be available in the last tab of this page. You can also use the push token which can be generated from the second tab of the same page for added security.
Note: replace <account> in the URL with your account slug
Related
I am working on Etsy Authentication. I have created an app and tried to test the Authentication via Postman in the same above process but I was not able to Authenticate I was getting an error
Error
And I was unable to Edit the App and also there is no option of "Request Full Access"
No Edit option and also no Request full access and the app state is in pending approval
Help me with the issue as I was previously able to Edit the App and I have tested few APIs as well but now I am unable to do it.
Postman image
If I hit this API in the browser as a response I need code but I was getting the above error
Your request isn't working because you haven't registered the callback URL for postman with your App, and of course you mentioned that you couldn't edit your app to add the callback URL.
There is a silly URL bug on the Etsy dev portal which sending you to a broken like when you click on your app to edit it.
Once you click on the App to edit it and end up at the 404 page,
Remove this from the URL and it will then work.
I have emailed the Etsy Developers to point out this bug so hopefully it will be resolved quickly.
To piggyback off of Gareth's answer:
Step 1:
In https://www.etsy.com/developers/edit/{account_id}/callbacks, add the following callback:
http://localhost:3003/oauth/redirect
Step 2:
Follow these instructions https://developer.etsy.com/documentation/essentials/authentication/, make sure to set:
redirect_uri=http://localhost:3003/oauth/redirect
*You don't actually need anything running at localhost:3003
A few months ago I created a private npm feed in Azure Artifacts. Authentication with this feed worked fine.
Recently others have started using this feed and authentication is not working for them using the tokens they have generated from Azure Artifacts. When npm installing they get the following error
npm ERR! Unable to authenticate, your authentication token seems to be
invalid. npm ERR! To correct this please trying logging in again with:
npm ERR! npm login
In the npm debug log there is this error
verbose stack Error: Unable to authenticate, need: Bearer, Basic realm="{{redacted url}}", NTLM
It appears that the structure of the authentication token which we put in the global .npmrc file has changed in Azure Artifacts
From:
; Treat this auth token like a password. Do not share it with anyone, including Microsoft support. This token expires on or before 27/02/2020.
; begin auth token
//{{redacted URL}}/_packaging/{{redacted user name}}/npm/registry/:_authToken={{redacted token string}}
//{redacted URL}}/_packaging/{{redacted user name}}/npm/:_authToken={{redacted token string}}
; end auth token
To
; Treat this auth token like a password. Do not share it with anyone, including Microsoft support. This token expires on or before 14/04/2020.
; begin auth token
//{{redacted url}}/npm/registry/:username={{redacted username}}
//{{redacted url}}/npm/registry/:_password={{redacted password}}
//{{redacted url}}/npm/registry/:email=npm requires email to be set but doesn't use the value
//{{redacted url}}/_packaging/{{redacted username}}/npm/:username={{redacted user name}}
//{{redacted url}}/_packaging/{{redacted username}}/npm/:_password={{redacted password}}
//{{redacted url}}/_packaging/{{redacted username}}/npm/:email=npm requires email to be set but doesn't use the value
; end auth token
When the second token is used (or indeed any of the tokens I now generate from Azure Artifacts), we cannot npm install, we get the error shown above. If other people use the same token (in the old format) as I have, this works fine. But this token will expire soon.
I have tried providing an email address instead of the strings "npm requires email to be set but doesn't use the value" but this also did not work.
This may be unrelated but we recently upgraded from tfs version 16.131.28507.4 to Azure Devops Server version Dev17.M153.3.
Does anyone know why the authentication token format has changed? And/Or how I can make the new tokens work with my private feed?
npm version: 6.13.0
node version: 10.12.0
Azure Devops Server version: Dev17.M153.3
After further investigation and a conversation with Microsoft Azure support we determined what was causing the issue for us.
The new format of tokens which have been rolled out for Azure Artifacts no longer work if your instance of TFS (Azure Devops) is hosted on a machine which is running IIS Basic Authentication. This probably then only applies to people hosting their TFS instance themselves on premises.
The only workaround available is to modify this new token and put a TFS user’s username and base 64 encoded password into the token string after the registry/:username= and registry/:_password= strings in the two places that these appear. This is not ideal as you effectively have to store a password in almost plain text on your build server.
But it seems that is now your only choice if you do need IIS Basic Authentication enabled. Disabling this and using a different authentication scheme does fix the token authencation and you can avoid having to do the above.
I'm not sure if this causes your problem - on our azure devops instance, we recently had conditional access enabled, which can disable a lot of the PAT/token based authentication streams without a clear error message - e.g. if you are using the token outside of your normal machine/access route (we were passing a token to a build service that we couldn't use 2FA to authenticate from, and it just stopped working overnight)
I have successfully deployed the virto platform and storefront on to azure.
the CMS content connection string was taken from the platform appsettings and assigned to the storefront CMS connection setting. The Api Hmac App Id and secret keys are assigned as per the documentation.
Platform and storefront are synced in azure with the latest.
however, when the storefront url is entered in the browser, it does not show the storefront, insted the following error occurs.
This page isn’t working our storename.azurewebsites.net is currently unable to handle this request.
HTTP ERROR 500
please advise if anyone encountered such error. Did I miss any other settings?
First of all, that is NOT CMS connection string related issue.
Second, try these:
restart platform app service
restart storefront app service
clear browser cookies / open page in anonymous mode. The url should start with https, not http
wait for 30 seconds as this could be a timeout issue on slower service configurations
Third: set ASPNETCORE_ENVIRONMENT=Development as described in https://learn.microsoft.com/en-us/aspnet/core/fundamentals/environments?view=aspnetcore-2.2#set-the-environment to get error stacktrace
I have setup a drone server (not in a container , running on my machine for the first part of this).
I have a github repo set up and the details for the github client and secret.
The server is http://localhost:4040 and the 'Authorization callback URL' set to http://localhost:4040/authorize
When I hit access http://localhost:4040 to login am sent to github to authorize the application. (This is in line with what I expected). The details all look correct (what I think it should be).
When I click the Authorize application button in the github screen I am redirected back to http://localhost:4040/authorize and on to http://localhost:4040/login?error=oauth_error
Where can I get more information on this error? Can I provide more details?
Where can I get more information about setting up a drone server (first) then a docker drone (as it seems that is the setup preferred (correct?))?
Thanks in advance for your time on this
https://new-console.ng.bluemix.net/docs/services/apiconnect/apic_tutorial.html#apic_tutorial_01
Follow previous link to do create loopback project named ibmsvt and do test locally, we can post and get.
then publish this api as running api app on bluemix and we will get api target url and tls file.
type url and tls in api designer invoke, and publish api product again.
check api connect service and we can find that published api product has been published, configure developer portal, and invite developers
login developer portal and register one app
subscribe app to api product and run post command.
We will see that we only get can't post error information...
Please see attachment info for error info and api file.
From the screen capture provided, it looks like you're displaying the logs for the loopback application deployed on bluemix. It also looks like the POST request from APIConnect hit the Bluemix application as well. However, I'm unable to see the exact message of the error. What error did you get when you execute the POST from APIConnect? I suspect the POST did not include the $(request.path), what did you change the invoke url to be ? Can provide the x-ibm-configuration section in your yaml file? It will be located in your /definitions.
Thanks and best regards,
I am just have the exact problem, and struggled for days on redoing the tutorial several times, but still met with the same problem until found the upper reply, and gave me a hint.
In the tutorial, it says like the following:
Update the following fields with the values you copied previously:
Invoke URL: Insert the API target URL. You must specify the secure protocol HTTPS. For example:
apiconnect-ca3283b0-525c-488d-993b-3ab72fca78d0.youremail-dev.apic.mybluemix.net
TLS Profile: Insert the API invoke tls-profile.
For example:
client:Loopback-client
The origininal URL is $(runtime-url)$(request.path)$(request.search).
And the correct URL after updating is like following:
https://apiconnect-ca3283b0-525c-488d-993b-3ab72fca78d0.youremail-dev.apic.mybluemix.net$(request.path)
no slash before $(request.path), and $(request.search) should be deleted.
I also checked a tutorial video, it also do like this, but the screen for this step is passed away very quickly, you will not pay attention to this detail normally.
https://www.youtube.com/watch?v=Qku71JLv8vA&list=PLFa8jnU0KqE2eW5E449ziaurv8obSbcou&index=3&cm_mc_uid=24774488665514672571374&cm_mc_sid_50200000=1468400063