I have a query when I need to convert a string to datetime, I use
CONVERT(DATETIME, '')
but it's still not working. My column fechac is of type Datetime.
If I pass in for example '2019-11-20 00:03:56.120', the query works but I don't need the time because is a parameter from an application web and I send the date example '2019-11-20'. Thanks!
This is my query:
SELECT *
FROM table
WHERE cb.fechac = CONVERT(DATETIME, '2019-11-20');
Use the format yyyyMMdd. With the datetime datatype yyyy-MM-dd is ambiguous. Otherwise, use a style code:
CONVERT(datetime,'2019-11-20',126);
CONVERT(datetime,'20191120')
Reading a lot through the lines in the comments here, however, are you actually after..?:
WHERE fechac >= '20191120'
AND fechac < '20191121'
Final reading through the lines. it appears the OP is actuaklly passing a parameter (I assume of the data type date), therefore...
WHERE fechac >= #fechac
AND fechac < DATEADD(DAY, 1, #fechac)
This should work on any system, regardless of internationalization settings:
WHERE cb.fechac=convert(DATE,'20191120');
SELECT *
FROM table cb
WHERE cast(cb.fechac as date) = convert(date, '2019-11-20', 23)
Related
I am working on a project in which dates and times ar stored as a varchar e.g. "30-11-2017,7:30" first date in dd-mm-yyy format and then time separated with a comma. I am trying to filter on it but it is not working correctly kindly guide me how to filter data on date.
select *
from timetrack
where startDateAndTime >= '30-11-2017,7:30'
In attached image records have been shown. When I apply above query it shows no records
You can easily convert your date to SQL datatype datetime uisng parse function, for example select parse('30-11-2017,7:30' as datetime using 'it-IT').
So, in your case, you can apply this function in where clause, so you can easily apply comparison between dates:
select *
from timetrack
where parse(startDateAndTime as datetime using 'it-IT') >= '2017-11-30 07:30:00.000'
Your format is apparently italian :) But you have to specify your own date in the format convertable to datetime, as I have done in above example.
NOTE: parse is available starting with SQL Management Studio 2012.
Unless you are using ISO date format (yyyy-MM-dd HH:mm:ss or close) applying ordering (which inequalities like greater than or equal use) will not work: the date order is disconnected from the string ordering.
You'll need to parse the date and times into a real date time type and then compare to that (details of this depend on which RDBMS you are using).
If, you want to just filter out the date then you could use convert() function for SQL Server
select *
from timetrack
where startDateAndTime >= convert(date, left(#date, 10), 103)
Else convert it to datetime as follow
select *
from timetrack
where startDateAndTime >= convert(datetime, left(#date, 10)+' ' +
reverse(left(reverse(#date), charindex(',', reverse(#date))-1)), 103)
You need the date in a datetime column, Otherwise you can't filter with your current varchar format of your date.
Without changing the existing columns, this can be achieved by making a computed column and making it persisted to optimize performance.
ALTER TABLE test add CstartDateTime
as convert(datetime, substring(startDateAndTime, 7,4)+ substring(startDateAndTime, 4,2)
+ left(startDateAndTime, 2) +' '+ right(startDateAndTime, 5), 112) persisted
Note: this require all rows in the column contains a valid date with the current format
Firstly, you need to check what is the data that is entered in the 'startDateAndTime' column,then you can convert that varchar into date format
If the data in 'startDateAndTime' column has data like '30-11-2017,07:30', you would then have to convert it into date:
SELECT to_date('30-11-2017,07:30','dd-mm-yyyy,hh:mm') from dual; --check this
--Your query:
SELECT to_date(startDateAndTime ,'dd-mm-yyyy,hh:mm') from timetrack;
I want to select from table where date column is equal to specific date which I sending as a string in format 'yyyy-mm-dd'. I need to convert that string and than to compare if I have that date in my table.
For now I am doing this:
select *
FROM table
where CONVERT(char(10), date_column,126) = convert(char(10), '2016-10-28', 126)
date_column is a date type in table and I need to get it from table in this format 'yyyy-mm-dd' and because that I use 126 format. I am just not sure with the other part where I converting string which is already in that format and do I need to convert it because I don't know is it good to use this:
CONVERT(varchar(10), date_column,126) = '2016-10-28'
You don't need to convert the column as well. In fact, you better not convert the column, because using functions on columns prevents sql server from using any indexes that might help the query plan on that column.
Also, you are converting a string to char(10) - better just convert it to date:
where date_column = convert(date, '2016-10-28', 126)
Also, if you are using a datetime data type and not date, you need to check that the datetime value is between the date you pass to the next date.
You can convert string to date as follows using the CONVERT() function by giving a specific format of the input parameter
declare #date date
set #date = CONVERT(date, '2016-10-28', 126)
select #date
You can find the possible format parameter values for SQL Convert date function here
You do not need to do that. yyyy-MM-dd is the default format.
Please note that you need to take into account the time as well, if there's a timestamp in date_column. In that case you should write something like this
... WHERE date_column >= '2016-10-28 00:00:00' AND date_column < '2016-10-29 00:00:00'
... WHERE date_column BETWEEN '2016-10-28 00:00:00' and '2016-10-29 00:00:00'
As I just learned that (other than I thought) BETWEEN actually includes the end timestamp and thus is not equivalent to the above >= ... < approach.
This should use indexes properly as well.
I'm pretty new to Sybase and am writing a query to return results after a specified date, and also before a specified date. MM/DD/YYYY format
At the moment im doing..
SELECT *
From aTable
WHERE afterDate >= 08/07/2013
AND beforeDate <= 08/08/2013
I'm getting records back, but as I'm a Sybase newbie, I want to be sure Sybase is interpreting these dates correctly..
Their online doc is pretty bad for basic explanations on things like this!
Anyone able to confirm if what I have works, or does it need some formatting round the dates?
You'll need to convert the dates into DATETIME and tell sybase what the format is to be sure.
According to this documentation the code for MM/DD/YYYY is 101, so something like this:
SELECT *
FROM aTable
WHERE afterDate >= CONVERT(DATETIME,'08/07/2013',101)
AND beforeDate <= CONVERT(DATETIME,'08/08/2013',101)
You can see the difference by running the following select statements:
SELECT CONVERT(DATETIME,'08/07/2013',101) --MM/DD/YYYY (2013-08-07 00:00:00.000)
SELECT CONVERT(DATETIME,'08/07/2013',103) --DD/MM/YYYY (2013-07-08 00:00:00.000)
For any date-time field in sybase, instead of going through the convert function, there is a more direct approach.
SELECT *
From aTable
WHERE afterDate >= '2013-08-07'
AND beforeDate <= '2013-08-08'
The date has to be in the form 'YYYY-MM-DD'
If you want to add a time, it can be included along with the date. The date and the time have to be separated by a T.
Any date time field can be directly used using the format 'YYYY-MM-DDTHH:MM:SS'
Using the functions is too lengthy. Noone needs a bazooka to shoot a squirrel! :)
CAST( '2000-10-31' AS DATE )
will convert from text to date format....
I am assuming that your two fields (afterDate and beforeDate) are in Date format.
Your example would be:
SELECT *
From aTable
WHERE afterDate >= CAST( '08/07/2013' AS DATE )
AND beforeDate <= CAST( '08/08/2013' AS DATE )
Also, usually (but not always) a date range is on the SAME field. As I said, that is not true all the time and you may have a good reason for that.
The best approach is to use the ANSI standard which does not require any conversion: yyyymmdd (you can also include hh:mm:ss) for instance:
DateField1 >= "20150101" and DateFile1 <= "20150102"
You should decide which Input-Strings the user is going to use as parameter and then convert them and concatenate them like you want, unless it is Datetime it is not important which initial format it had, you can use it in a between-condition.
E. g. the user is from Europe and uses "DD.MM.YY" and "hh:mm" as an input parameter, I would convert and concatenate like this:
WHERE dateCol between convert(DATETIME,
convert(char(11),
convert(DATETIME, '01.06.14', 4), 16) || ' ' || '00:00', 8)
AND convert(DATETIME,
convert(char(11),
convert(DATETIME, '01.07.14', 4), 16) || ' ' || '16:00', 8)
Ii have values stored in the SQL Server in the following manner : 02-Jul-12 12:00:00 AM here the time and minutes, seconds can be anything like 02-Jul-12 12:15:52 PM ,02-Jul-12 6:02:12 AM so on.
I want to have a where condition which will omit the time and take the data based on the date like the following where some_Date='02-Jul-12'
How would I do this?
SELECT * FROM whatever WHERE some_Date LIKE '02-Jul-12%';
If you are on SQL2008 or later, you can cast your DATETIME to DATE.
See this post: http://blog.sqlauthority.com/2012/09/12/sql-server-get-date-and-time-from-current-datetime-sql-in-sixty-seconds-025-video/
But in a WHERE-clause it is better to search between dates, like this:
DECLARE #startDate DATETIME = '02-Jul-2012'
DECLARE #endDate DATETIME = DATEADD(DAY, 1, #startDate)
SELECT * FROM [table] WHERE [some_Date] BETWEEN #startDate AND #endDate
SELECT * FROM dbo.tbl_MyTable
WHERE
REPLACE(CONVERT(VARCHAR(9), DateTimeValueColumn, 6), ' ', '-')='02-Jul-12'
or
On chage in code is instead of using getdate function voncert you datestring in datetime format and do compare this follow query will work for you
SELECT * FROM dbo.tbl_MyTable
WHERE
CAST(CONVERT(CHAR(10), DateTimeValueColumn, 102) AS DATE) =
CAST(CONVERT(CHAR(10),GETDATE(),102) AS DATE)
If you are storing dates as characters -- which is not recommended -- you should at least use ISO format: YYYY-MM-DD hh:mm:ss. This makes the date useful for sorting and comparisons ("<" works, ">" works, "between" works as well as equals).
To extract the date, you can then use left(datestr, 10). In your format, you would use:
where left(datestr, 9) = '01-Jan-13'
If you are storing the fields as a datetime or smalldatetime, you may think they are stored as a string. They are not. They are stored as some number of days since some particular date, with day parts stored as fractional days. If you are using SQL Server 2005 or greater, then the best way is:
where cast(datetime as date) = '2013-01-01' -- I recommend ISO formats, even for constants. '20130101' is even better
To select rows with today's date (not time)
select * from myTable where datediff(dd, dateColumn, getdate()) = 0
I have two tables where column [date] is type of DATETIME2(0).
I have to compare two records only by theirs Date parts (day+month+year), discarding Time parts (hours+minutes+seconds).
How can I do that?
Use the CAST to the new DATE data type in SQL Server 2008 to compare just the date portion:
IF CAST(DateField1 AS DATE) = CAST(DateField2 AS DATE)
A small drawback in Marc's answer is that both datefields have been typecast, meaning you'll be unable to leverage any indexes.
So, if there is a need to write a query that can benefit from an index on a date field, then the following (rather convoluted) approach is necessary.
The indexed datefield (call it DF1) must be untouched by any kind of function.
So you have to compare DF1 to the full range of datetime values for the day of DF2.
That is from the date-part of DF2, to the date-part of the day after DF2.
I.e. (DF1 >= CAST(DF2 AS DATE)) AND (DF1 < DATEADD(dd, 1, CAST(DF2 AS DATE)))
NOTE: It is very important that the comparison is >= (equality allowed) to the date of DF2, and (strictly) < the day after DF2. Also the BETWEEN operator doesn't work because it permits equality on both sides.
PS: Another means of extracting the date only (in older versions of SQL Server) is to use a trick of how the date is represented internally.
Cast the date as a float.
Truncate the fractional part
Cast the value back to a datetime
I.e. CAST(FLOOR(CAST(DF2 AS FLOAT)) AS DATETIME)
Though I upvoted the answer marked as correct. I wanted to touch on a few things for anyone stumbling upon this.
In general, if you're filtering specifically on Date values alone. Microsoft recommends using the language neutral format of ymd or y-m-d.
Note that the form '2007-02-12' is considered language-neutral only
for the data types DATE, DATETIME2, and DATETIMEOFFSET.
To do a date comparison using the aforementioned approach is simple. Consider the following, contrived example.
--112 is ISO format 'YYYYMMDD'
declare #filterDate char(8) = CONVERT(char(8), GETDATE(), 112)
select
*
from
Sales.Orders
where
CONVERT(char(8), OrderDate, 112) = #filterDate
In a perfect world, performing any manipulation to the filtered column should be avoided because this can prevent SQL Server from using indexes efficiently. That said, if the data you're storing is only ever concerned with the date and not time, consider storing as DATETIME with midnight as the time. Because:
When SQL Server converts the literal to the filtered column’s type, it
assumes midnight when a time part isn’t indicated. If you want such a
filter to return all rows from the specified date, you need to ensure
that you store all values with midnight as the time.
Thus, assuming you are only concerned with date, and store your data as such. The above query can be simplified to:
--112 is ISO format 'YYYYMMDD'
declare #filterDate char(8) = CONVERT(char(8), GETDATE(), 112)
select
*
from
Sales.Orders
where
OrderDate = #filterDate
You can try this one
CONVERT(DATE, GETDATE()) = CONVERT(DATE,'2017-11-16 21:57:20.000')
I test that for MS SQL 2014 by following code
select case when CONVERT(DATE, GETDATE()) = CONVERT(DATE,'2017-11-16 21:57:20.000') then 'ok'
else '' end
You may use DateDiff and compare by day.
DateDiff(dd,#date1,#date2) > 0
It means #date2 > #date1
For example :
select DateDiff(dd, '01/01/2021 10:20:00', '02/01/2021 10:20:00')
has the result : 1
For Compare two date like MM/DD/YYYY to MM/DD/YYYY .
Remember First thing column type of Field must be dateTime.
Example : columnName : payment_date dataType : DateTime .
after that you can easily compare it.
Query is :
select * from demo_date where date >= '3/1/2015' and date <= '3/31/2015'.
It very simple ......
It tested it.....