Running GraphDB on windows.
I right clicked the icon, clicked settings. Tried to set Xmx512Mb, (so I mistyped, should have been Xmx512M). Now trying to run GraphDB says "Failed to create JVM", even after uninstalling and re installing.
Where can I find and undo what I typed in the settings if the UI is not starting up?
In other words, where is this configuration stored?
I removed AppData/Roaming/GraphDB and AppData/Local/GraphDB Free
Just to generalize it, If you set an invalid Java option parameter, GraphDB Free may fail to start after the application restart. The only way to solve this problem is to remove the invalid line from the file:
%userprofile%\AppData\Roaming\com.ontotext.graphdb.free\packager\jvmuserargs.cfg (Windows)
~/Library/Application Support/com.ontotext.graphdb.free/packager/jvmuserargs.cfg (Mac OS)
~/.local/com.ontotext.graphdb.free/packager/jvmuserargs.cfg (Linux).
In addition to Damyan's answer there is a GraphDB Free.cfg file in C:\Users\User\AppData\Local\GraphDB Free\app\ which you can edit.
Related
Steps to reproduce are very easy.
Create a Dockerfile.
My Dockerfile has many more lines, but I have trimmed them so we can focus in the source of the problem.
Said that, these two lines alone (without anything more) show the problem.
FROM microsoft/iis
SHELL ["powershell", "-Command", "$ErrorActionPreference = 'Stop'; $ProgressPreference = 'SilentlyContinue'; $VerbosePreference = 'Continue'; "]
Run docker build . and you get hcsshim::PrepareLayer - failed failed in Win32: Función incorrecta. (0x1).
Windows 10 Pro 1909 (but it happened too in 1903)
Docker version: 2.1.0.5
Engine: 19.03.5
Machine: 0.16.2
I have found the solution to the problem.
Reading all the https://github.com/docker/for-win/issues/3884 bug, some have found a simple solution: rename C:\windows\system32\driver\cbfsconnect2017.sys so it isn't loaded the next boot.
Disabling that driver enables me to do a docker build for the first time in windows containers in almost a year.
In my case Box Sync was the one using that driver.
EDIT: #GustavoTM have found that pCloud raises the same problem.
EDIT2: #VonC have noticed that some people in the issue in GitHub has solved it deleting this other file: C:\Windows\System32\drivers\cbfs6.sys. I haven't tried that, but i put it if it helps others.
The good thing is that I don't need to uninstall Box, but only rename that file.
This is still an issue (still open) with Win10.
Looks like uninstalling cloud storage providers with file system filters like Dropbox, Box, etc. as a workaround is an option for some users.
Deinstall cloud storage providers or virus scanners; if you identify which one is not working please share in https://github.com/docker/for-win/issues/3884
In my case was the problem similar but the file cbfs6.sys was placed somewhere in the rest of uninstalled application Jungle disk, somewhere in the folder c:\Program files\Jungle disk .... It's part of Callback File System signed by EldoS Corporation.
The folder could be rename only and not delete directly. So I could delete its immediately after the PC restart, before running the Docker. So it could be delete during the Docker service restart too.
I'm following Odoo's documentation to use the --dev all parameter when I run odoo-bin, in order to have Python models get updated when I change the source code without me having to restart the server. According to the documentation, the reload flag (which is part of all) doesn't work with some text editors. I've been using Sublime Text, and that doesn't seem to work because my model changes don't take effect until I restart the server. Is there a good, commonly used text editor which does work with the reload parameter, or is there a list of text editors which work with it?
If you're running Odoo from the command line via a standard ./odoo-bin --dev reload command then you should not have any issues as long as you have the lib dependencies setup.
Make sure to monitor your log for errors. It requires the watchdog library to be installed via pip install watchdog. Take a look at (currently line 943) of the core files https://github.com/odoo/odoo/blob/10.0/odoo/service/server.py to see how dev reload works:
def start(preload=None, stop=False):
...
watcher = None
if 'reload' in config['dev_mode']:
if watchdog:
watcher = FSWatcher()
watcher.start()
else:
_logger.warning("'watchdog' module not installed. Code autoreload feature is disabled")
if 'werkzeug' in config['dev_mode']:
server.app = DebuggedApplication(server.app, evalex=True)
I am not completely sure, but after doing a quick search on the text editor that I have been primarily using (Atom developed by GitHub), I believe it may have what you're looking for.
Have fun with your future endeavors. I hope my answer helps.
Since odoo uses werkzeug server,you can just use the command line argument to start the server, and everything will be taken care by the server.
./openerp-server --auto-reload
this will restart the server whenever .py file is modified.
I'm following these steps outlines on this link, however when I try to start the server nothing happens nor can I connect to anything from the client. Does anyone know how to run this?
when I try from a command prompt instead of double clicking the redis-server.exe I get this message
[11868] 23 Jul 11:58:26.325 # QForkMasterInit: system error caught. error code=0
x000005af, message=VirtualAllocEx failed.: unknown error
http://bartwullems.blogspot.ca/2013/07/unofficial-redis-for-windows.html
The easiest way to install Redis is through NuGet:
Open Visual Studio
Create an empty solution so that NuGet knows where to put the packages
Go the Package Manager Console: Tools –> Library Package Manager –>Package Manager Console
Type Install-Package Redis-64
image
Go to the Packages folder and browse to the Tools folder. Here you’ll find the Redis-server.exe. Double click on it to start it.
Redis is ready to use and start’s listening on a specific port(6379 in
my case)
image
Let’s open up a client and try to put a value into Redis. Start Redis-cli.exe. It already connects to the same port by default.
image
Add a value by executing following command:
image
Read the value again:
image
Try to run with redis-server --maxheap 4000000
Miguel is correct, but it is not that simple. To start redis-server either as a service or from the command prompt, the amount of available RAM and disk space must be sufficient for Redis to run as configured.
Now, if no configuration file is specified when running Redis, it will use the default configuration values. All of this is documented in the redis.windows.conf file as well as in the document "Redis on Windows.docx" (both deployed with the redis installation).
In my experience, errors when starting Redis usually come from lack of available resources (RAM or disk space) or some incorrect configuration of maxhead or maxmemory parameters.
To troubleshoot this kind of behavior, check your system's available resources and try running redis-server from the command line varying the parameters maxmemory, maxheap, and/or heapdir. The loglevel parameter set to verbose might also help diagnosing the issue.
Regards
I have installed PyDev successfully, I have python 3.4.0 installed successfully and the folder containing python.exe is in my path and I can run it from the command line.
However, when I go to window\preferences\pydev\interpreters\python interpreter and select 'quick auto-config' to configure it using normal python I get an error saying 'auto configurator could not find a valid interpreter... Note the system environment variables used for Jython are PATH and PYTHONHOME.'
Unless this is a bug in the text I am not selecting Jython (I get a different error if I select IronPython, btw, so this is not a generic error message).
The trace is as follows:
Errors getting info on discovered interpreter(s).
See error log for details.
java.lang.RuntimeException: java.io.IOException: Cannot run program "python": CreateProcess error=2, The system cannot find the file specified
As I say, python.exe is in my path.
You have to install the actual python package separately from here https://www.python.org/download
Close LiClipse/Eclipse => Download Python Here: https://www.python.org/download
=> reopen LiClipse => Auto Config for the interpreter Will WORK!
I found the answer, but I'll leave this up in case anyone else gets it. It's a pretty stupid auto config option if you ask me ;)
In the higher level window\preferences\pydev\interpreters\ preference you need to untick jython and ironpython.
No idea why given I selected the Python sub-preference specifically.
I have been working with phpStorm and it had suddenly stopped showing suggestions for code completion. When i do Ctrl + space its behaving correctly by showing all the possible options in a drop down.
I have followed the below link and have did invalidate cache but still of no use.
PhpStorm code completion doesn't show core classes/extensions
My Setup is:
OS: Mac - 10.9.2 (Mavericks)
PHPStorm: 7.1.3
I just had the same problem, fixed it when I realized I mistakenly put PHPStorm in Power Save Mode. Click the little fellow on the bottom right of your PHPStorm window and switch that off
Indeed, the Power saving mode (File > Power Saving Mode) allow you to disable the code inspection functionnality.
However sometimes the PhpStorm code analysis failed and you lost your code completion. In this case you juste have to ask for a new code analysis (File > Synchronize [CTRL+ALT+Y]) or invalid the cache and force a restart (File > Invalid cache / Restart).
Hope that helps.
Invalidating the cache did not work for me, but this did:
Enable power save mode (File > Power Save Mode), then disable it.
If your are using a Linux distro (Ubuntu, Debian, Centos) etc, it is due to ibus.
Just change the Shortcut (run: ibus-setup and change to Super+Ctrl+Space for instance) and everything will be fine again.
Or (my favorite): uninstall ibus if you are not using it.
In a Debian/Ubuntu distro should be:
sudo apt-get remove ibus
Ctrl+Space autocompletion should be back.
It was power saving mode for me too. It's an option at the bottom of the File menu.
install a previous version
https://www.jetbrains.com/phpstorm/download/other.html
Worked for me after I tried everything.
I struggled with this for a few hours this morning. After invalidation of caches, a complete reinstall, etc.. nothing worked.
I closed phpstorm and removed the .idea folder in the filesystem. I then renamed the project folder and reopened it. Autocomplete was now working!
I noticed that phpstorm then created the old project directory in the background, even though I did not open it and put a .idea folder in it. Something is obviously corrupted here.
" ... stopped showing suggestions for code completion".
On mac you can invoke it by fn+ctrl+space.
Going to php-storm -> Settings -> Keymap -> Set Active Changelist you can see it is associated with ^+space.
on windows ctrl+space