All Mac computers at my job were upgraded to macOS Mojave four days ago. Since then, no Mac users have been able to connect to any MarkLogic WebDav servers. PC users are able to connect no problem and so are Macs that are still running older versions of macOS.
Also, now when trying to connect to the WebDav server through Finder, we get this pop-up message:
"Do you want to send your name and password in a way that is insecure?
The baseURL provided uses an unsecured method for network communication. To use a secure connection, you must use a server that supports SSL."
Has anyone else encountered this issue? Is there a setting in MarkLogic that we need to change?
Thank you!
It sounds like the primary change is that macOS now issues a warning when you are connecting in a way that could send your password in clear text.
MarkLogic supports WebDAV over SSL, so to remove the warning, you will need to enable SSL on your WebDAV app server.
The MarkLogic Security Guide goes into the details of Configuring SSL on App Servers.
You can also check the WebDAV Server Configuration Help for a complete list of the available options for a WebDAV app server.
It was an Apple issue. We installed the Mojave 10.14.6 supplemental update and the problem fixed itself. We're able to connect to the WebDav servers no problem. Thanks!
Related
Here is my working context;
no internet (I use my company's intranet)
Linux CentOS 7.9 remote server with my source files
PhpStorm 2021.3.2 on my development PC
My wish is to develop on my PC on remote sources. Your new JetBrains Gateway solution seems to meet my expectations on paper.
However, in practice, I have the impression that it is not possible to use this solution without internet ? Indeed, the connection process stops on this failure:
Looks like your solution is trying to download an IDE client to install on my machine. Which from my point of view is a weird behavior because I already have a client to install on my machine: PhpStorm. Why not use my PhpStorm client already installed on my machine ?
Thank you for your reply
The "Jetbrains Client" mentioned in the error message is not for your local machine, but for the Linux server:
Once the IDE version and project directory are selected, Gateway will download the IDE to the remote server, unpack it, and launch it with your project loaded.
It acts on the remote server as a "backend IDE" to which the client on your local machine connects:
The JetBrains Client runs locally and provides the user interface for the IDE backend.
You would not even require the full PHPStorm IDE, the Jetbrains Gateway is a standalone app that comes with a "thin client" that can connect to the backend IDE:
This whole process is managed by JetBrains Gateway, a new, compact, standalone app that provides everything you need to get started with remote development. Since it’s standalone, it’s the only thing you need to install locally to start working and is ideal for less powerful laptops and in cases where a full IDE install isn’t desired.
See https://blog.jetbrains.com/blog/2021/12/03/dive-into-jetbrains-gateway/ for a more detailed look at how it works.
To answer your question: it is not possible to use Jetbrains Gateway without an internet connection.
I've recently moved a Virtual machine from a server to another one.
Both the servers are running Windows Server 2012 R2 as the guest host.
The generation 2 VM run almost perfectly, but it doesn't recognize the network adapter.
Integration services are updated (if I try to re-install it it says they are already updated and doesn't let me repair it).
On device manager I see the exclamation mark left to the adapter.
If I let it search for drivers in C:\Windows it says that the "Network adapter for Hyper-V" is found, but it isn't digitally signed, so it won't be installed.
Anyone could help me making this adapter work?
I couldn't figure out how to remove and re-install integration services either...
Ok, I found a solution.
I had to Disable Driver Signature Enforcement in the advanced boot options.
I am new in SVN configuration. I have Windows 8 with 4 drives. I am planing to configure TortoiseSVN 1.7.12 on one of drive and will do the checkout from another drive.
I have installed it but unable to configure it as SVN server.
How can i configure it?
Appreciate you help on this.
Thanks in advance.
You can't get TortoiseSVN configured as a server because it's not a server. TortoiseSVN is a client.
If you wish to run a server, you need to acquire & install Apache (if you want to use HTTP access) and a Win32 command-line build of Subversion (no matter what). You may find this easier via one of the pre-built packages such as CollabNet Subversion Edge, VisualSVN Server, or uberSVN
If you're going to be sharing with someone else, get a separate server set up and managed properly - don't run it off your desktop (what happens when your hard drive crashes, or you go away on vacation?).
The current stable version of TortoiseSVN is 1.7.13. You might consider using that.
Server configuration is an activity which you should do after careful preparation.
You may read the details here:
http://svnbook.red-bean.com/en/1.7/svn.serverconfig.html
I'm currently developing a simple multiplayer game app for Android and I need to have a server to which the users connect to.I'd like to set up this server at home. I have a dynamic IP address,so someone told me I'd have to set up a local DNS server or something like that. I'm not even sure where to start with setting up a DNS server, everything I found was for windows 2003 and linux. Nothing for XP? If any one can shed some light on this matter, explain a bit how setting a DNS works or supply a link with "setting up local DNS for dummies" I'd be grateful.
Also, besides setting up a DNS so I can find the server every time, how about the communication with it? I'd like for it to be as secure as possible. Another friend told me something about communicating via SSH, which is again something I am not accustomed to.
So if someone could explain some of these concepts or offer some GOOD link for that that would be great. I'm very confused :)
Thanks
EDIT
Btw, the server is in Java and currently i'm communicating from Android emulator to the server (which is localhost) via sockets.
That's not a simple thing you're trying to achive. First you have to create your own server on your machine (maybe you're done with this step), then you have to make this server available for everyone. At this point, I suggest the DynDNS service:
http://lifehacker.com/124804/geek-to-live--how-to-assign-a-domain-name-to-your-home-web-server
A local DNS by default help you to find your own servers by name instead of IP address, but if you have a usual internet service with dynamic IP, you need an external DNS provider to route your clients to your server. (read the link above for the full explanation)
About the SSH security: Yes, you will need some security settings indeed, but that could be a very hard problem sometimes. You can set your server to work with SSL sockets, which is a part of the core J2SE release. It will work against some sort of attack, but none against others. Running your own server will raise unexpected numbers of problems, prepare for that.
As already stated in the comment to your post, something like http://www.no-ip.com or http://www.dnsdynamic.org would solve the issue with your dynamic ip - You do not need a local DNS server.
With regards to communication, i believe that SSH is linux/unix only. Since you wish to use Windows for the server, FTP or Remote Desktop would be best. Choose FTP if all you want to do is manage your files, choose remote desktop if you wish to manage your entire computer. I've had good results with the FileZilla FTP server on windows (http://filezilla-project.org/)
With that said, i think you would be better off buying a simple and cheap hosted service instead of using your own computer - you can get something that can run your java app for $5/month some places, and compared with the annoyance of having a local server running in your house, it might be worth it.
I'm currently faced with the task of integrating a glassfish environment and an FTP-Server with LDAP. This is work for an university, we need to be able to have a number of students(which all have Login-Data via LDAP, though access is only permitted via SSL) run their own applications on a glassfish server, upload them and then restrict their access at a given date.
I set up a Suse Enterprise 10 SP3-Server, configured it, installed a Java6-repository and Glassfish 3.0.1. Does anybody know whether there is a way to connecting Glassfish with LDAP and letting specified users upload specific programms? If upload is not possible I thought about simply setting up a FTP-Server and connecting that via LDAP, can anybody point me to a link on how to do that?
I obviously googled but getting information for Suse Enterprise 10 is actually very hard, wasted about an hour because I wanted Java 6-repos instead of compiling it via source.
thanks for any help in advance
Glassfish rpms can be downloaded from opensuse build service http://software.opensuse.org/search
For Glassfish integration with ldap, this might be of help