Here is my working context;
no internet (I use my company's intranet)
Linux CentOS 7.9 remote server with my source files
PhpStorm 2021.3.2 on my development PC
My wish is to develop on my PC on remote sources. Your new JetBrains Gateway solution seems to meet my expectations on paper.
However, in practice, I have the impression that it is not possible to use this solution without internet ? Indeed, the connection process stops on this failure:
Looks like your solution is trying to download an IDE client to install on my machine. Which from my point of view is a weird behavior because I already have a client to install on my machine: PhpStorm. Why not use my PhpStorm client already installed on my machine ?
Thank you for your reply
The "Jetbrains Client" mentioned in the error message is not for your local machine, but for the Linux server:
Once the IDE version and project directory are selected, Gateway will download the IDE to the remote server, unpack it, and launch it with your project loaded.
It acts on the remote server as a "backend IDE" to which the client on your local machine connects:
The JetBrains Client runs locally and provides the user interface for the IDE backend.
You would not even require the full PHPStorm IDE, the Jetbrains Gateway is a standalone app that comes with a "thin client" that can connect to the backend IDE:
This whole process is managed by JetBrains Gateway, a new, compact, standalone app that provides everything you need to get started with remote development. Since it’s standalone, it’s the only thing you need to install locally to start working and is ideal for less powerful laptops and in cases where a full IDE install isn’t desired.
See https://blog.jetbrains.com/blog/2021/12/03/dive-into-jetbrains-gateway/ for a more detailed look at how it works.
To answer your question: it is not possible to use Jetbrains Gateway without an internet connection.
Related
I am using worklight 5.0.6 in Eclipse juno on Windows 7.
I made a simple form filling app. I am deploying this app on my PC, Making it a worklight server. I am accessing it from the instance of the app which is running on my phone.
It works fine as long as my Phone and PC are on the same network, that is, on local LAN.
But when I change the network to Internet, the app is not able to connect to the worklight server - which is, again, my PC.
My Questions are:
Where should i put the public IP address to access the worklight server?
Should i change the worklight version to make it work?
Also, I read solutions that you gotta run the "Build and deploy on remote servers" But i couldn't find the option for it, what i found was "Run on Server"
But i really don't know how to proceed after that.
Should i change the worklight version to make it work?
You should upgrade your Worklight from 5.0.6 to a later release regardless of the connectivity problem - it is a very, very, old release.
Also, I read solutions that you gotta run the "Build and deploy on
remote servers" But i couldn't find the option for it, what i found
was "Run on Server"
This is not related to what you are facing. This option is meant to be used as you prepare to move the development environment (the developer workstation) to other environments, such as QA, UAT and Production. This feature is meant to change the connectivity settings in the application. Again, not relevant for you at this time.
But when I change the network to Internet, the app is not able to
connect to the worklight server - which is, again, my PC.
The problem you are experiencing is expected. There is your PC, which acts as the local server, connected to the Internet via your router. And there is the device, also connected to the same network via the router.
As you disconnect the device from the local network, it is no longer able to connect to the server, which is still in the local network.
If you want that work still, you'd need to setup a server with an external IP address that your device will attempt to connect to, and be able to route the request to the Worklight Server... in short, in a development environment it is expected that you will be on the same network.
I've recently moved a Virtual machine from a server to another one.
Both the servers are running Windows Server 2012 R2 as the guest host.
The generation 2 VM run almost perfectly, but it doesn't recognize the network adapter.
Integration services are updated (if I try to re-install it it says they are already updated and doesn't let me repair it).
On device manager I see the exclamation mark left to the adapter.
If I let it search for drivers in C:\Windows it says that the "Network adapter for Hyper-V" is found, but it isn't digitally signed, so it won't be installed.
Anyone could help me making this adapter work?
I couldn't figure out how to remove and re-install integration services either...
Ok, I found a solution.
I had to Disable Driver Signature Enforcement in the advanced boot options.
Right now i am developing an app on remote DEV server. Every time when i update the code (js,html,css etc) then test on the device locally. There is a popup to force me to update the app. But my app need to connect DEV server for testing some backend feature like login.
DEV server is a remote Websphere running WL6.1 for development purpose. Why i need it because my app connect to some web services like Auth server via internal environment (actually is VPN). And those services i cannot set up easily in local environment. That makes using localhost for development is not really possible.
My problem is feeling the development process not really handy. Every time i change the code and want to run on the devices. I need to upload the .wlapp via console. It takes time! Everyday i change the code thousands time. That's why i need a solution.
And now i am seeking for 2 possible ways:
Auto push the .wlapp to remote server when i run and build. Can ANT do that? i read the Doc and find it's a bit of complicated.
Disable Direct Update. Actually i do a tricky hack inside worklight.js to override this feature. But i think it is not a good solution. So, is there any server config can switch the that off?
And i read this thread IBM Worklight - How to disable Direct Update?
Not working.
From what you are describing, things seem to work exactly as they should.
You have your local Worklight Development Server (that's the Worklight Studio plug-in you've installed in your Eclipse).
You have a remote server - here I am presuming this is actually some application server with Worklight Server deployed on it (that is, not the plug-in, but an actual installation of the server component) as well as your deployed project's .war file.
If that's not your setup, you need to think again about your 'testing setup'.
Auto push the .wlapp file to remote server. So the dev server always
keep the latest resource. Not to force me "update" the older version
on the server.
No. You can't do this. You need to manually build your app with the correct connectivity settings for the remote server via Run As > Build Settings and Remote Target.
In addition to the native project that will now contain these connectivity settings for the actual app, you will also have a .wlapp file in the bin folder. You will need to manually deploy it each time you're changing your app's contents. That's why you do development testing in the local development server... when moving to a remote server, that's for QA/UAT/PROD purposes usually.
Just disable this annoying feature in DEV environment.
You will need to do this in both servers via their respective Worklight Console as described in the question you've linked to, so that once you deploy the .wlapp file, it will not send a Direct Update request.
Instead, you'll need to manually re-install the app each time.
I suspect you didn't do this action on the remote server?
If you did, then you need to explain your setup, as the only thing you've wrote about was its name... "dev".
No. You need to manually deploy the .wlapp to your remote server.
I am building worklight project using eclipse environment when i run the project , i need to connect my tablet to local network then only i works for me for all the server updates and all.
I just want to move worklight server on http server which i can access using http://publicurl/anyprject which runs on apache. Now i want to work on eclipse but whenever i deploy the project it should deploy on public so that i can access it from anywhere.
Just tell me the process and what the thing i need to move on public server.
Since you've come here to ask a question, please also take a moment to write properly structured and coherent sentences in English. This will only benefit everyone and you will get a better answer, and faster too.
Try the following:
Instead of choosing Build All and Deploy, try choosing Build for Remote Server; there you should input the external (public) IP address of your machine. Next, run the generated project in your device. This should allow it to connect to the Worklight Server.
Note that both the Worklight Server (or rather, the machine that hosts it) and the device must be on the same network, in this case - connected to the public Internet.
Based on your comment, you can:
I would seriously try to open your own machine to public access
If not possible, I would try to move to develop on the Linux machine instead
If not possible, then you must install Worklight Server on the Linux machine and whenever you make changes to the project - deploy the updated .war, .wlapp and .adapter files to your installation on the Linux machine
Build the app with Build for Remote Server so that it will connect to the Linux machine instead of the local development machine
Step 3 above means you'll need to maintain 2 development environments, which is not so easy.
If you are during development, you should aspire for options 1 or 2; in other words, create a proper development environment. In Mobile, this requires public Internet access (usually).
Are you a stand alone developer, Business Partner or a Customer of IBM?
Which options do we have to do automated UI testing on remote computers connected via RDP, if I don't want to install anything on the remote computer?
My only idea is to open the rdp session always in the same way and use recorded mouse and key strokes, but there are some disadvantages, e.g. I assume it's slow?
Anyways, do you know any open source or proprietary tools I can use? Best would be that I have to install nothing on the remote machine and play the record on my local machine.
Starting with UFT 11.50 (previously known as QTP) there is support for image based testing.
You can have one machine with UFT installed and replay on other machines via RDP using Insight UFT's image based automation solution.
eggPlant Functional allows you to automate the UI of any app on Windows machines using an RDP connection. It's pretty fast assuming you are connecting over a decent network, and you don't need to install anything additional on the target machine.