I have two UVC cameras in a stereoscopic setup, controlled with a C++ MediaFoundation app. I need to uniquely identify them in order to assign left and right to each physical device. This camera model has a unique serial number in the USB descriptor. However I can't seem to find a way to get the serial number while enumerating using MediaFoundation.
The MF enumeration order of these cameras is not reliably in port order; 95% of the time, camera 1 is enumerated before camera 2, while on some machines, we get camera 2 before camera 1. So finding the serial number is very important.
Things I've tried:
MediaFoundation doesn't seem to provide a direct way to get the serial number at all
By querying the MF_DEVSOURCE_ATTRIBUTE_SOURCE_TYPE_VIDCAP_SYMBOLIC_LINK attribute, you can get a USB symbolic link. The docs say this can be used to call SetupDiOpenDeviceInterface however this doesn't seem to be usable to get the serial number (or the USB descriptor) either.
WinUSB can be used to open some USB devices in a generic manner, so the USB descriptor might be accessible, but this method fails on these cameras also, after passing the handle from CreateFile.
IOCTL the lowest level method, apparently you can send a IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX to the hub device, with a port index, and it will return the descriptor from which you should be able to get the serial number. No idea how to get the hub device and port index from only the symlink though.
Related, but unresolved: How to get hardware ID when enumerating with Windows Media Foundation
I do not wish to reimplement half of the USBView example and enumerate the entire USB world just to get some specific info for a device for which I already have a handle.
Some symbolic links for USB devices can be parsed to extract the serial number, however in the case of composite devices (all the devices in question here) the symbolic link has the &MI_00# style format and does not contain the serial number in the symlink string. So it cannot simply be parsed out.
More generally, the Setup and related APIs in Win32 seem to make it easy to get information such as manufacturer, friendly name, and all sorts of other info. But serial number is conspicuously absent.
So how do you get the serial number associated with a MediaFoundation device instance?
You can do camera identification by USB port connection (Root-Hub-Port identifiers are the same if you don't connect new USB cards or hubs to the system)
Unfortunately StackOverflow doesn't give to attach images (I don't have good enough reputation).
I'll try to show data from debugger:
There is list of my available cameras
+Integrated_Webcam/R1.H2.P4/VID_1BCF&PID_2284&MI_00;
+HBVCAM FHD CAMERA/R4.H2.P4/VID_058F&PID_3821&MI_00;
+HD USB Camera/R5.H2.P5/VID_05A3&PID_9230&MI_00;
+Integrated_Webcam/R5.H2.P6/VID_1BCF&PID_2284&MI_00;
+Logitech HD Webcam C270/R1.H2.P1/VID_046D&PID_0825&MI_00;
Each string consists of Friendly camera name, Rx.Hx.Px camera connection port indexes, (i.e. Controller number"R"-Hub number"H"-Port number"P") and VID-PID-MI presentation string(vendor id, product id and interface number).
1st and 4th cameras are the same, but have different RHP indexes. These indexes I do use for camera identification.
I did USB enumerator which provides these indexes (I did this on the base of Microsoft USBView.exe application which is provided with sources in Windows SDK).
[1]: https://i.stack.imgur.com/6SQcS.png
Usually simple USB cameras (web cameras) doesn't have serial number or something like serial number is encoded inside USB instance ID. More expensive cameras have special drivers and you can read SN by driver.
I see only one way to know, what camera I do use now - by attached USB port. This port is unique... if you don't connect additional hubs or not insert additional USB interface cards in computer. There is USB enumeration process which provides Controller(Root)-Hub-Port enumeration indexes. I do use these indexes for camera identification.
Look on this dialog: you see 5 strings with 5 USB cameras descriptors. Each descriptor consists of "Friendly Camera Name", 3 enumeration indexes (Rx.Hx.Px) and camera vendor ID and product ID (VID and PID).
If I put different camera to the same port, my program will use this different camera. If several cameras of the same type are connected, I do differ between cameras by RHP indexes. For example, the first and the fourth camera in list are the same, but they have different
enter image description here
I'm working on stm32f3 discovery board. For my current project I planned on coding a simple UART program on the board, I happened to read somewhere on the internet that to use the board for UART communication with PC the 'USER USB' has to be used.
My questions are the following
Firstly when i connect my board to PC using the 'USER USB'. The PC refuses to recognize the board.(F.Y.I- OS used is windows 7 64bit). This problem persists even after I update the driver! How to resolve this?
Is the "Connecting USER USB" part correct? because I can't see any RS232 chip on board
Should I use an add on board?
P.S I've installed all the necessary drivers from ST website and works flawlessly while using 'ST-Link interface' part of the board
I started working with the STM32F3 disco a few weeks ago. The user USB thing is a bit tricky.
To get it clear: The board has 2 USB ports.
One mostly for programming and debugging. It connected to a second ST chip which works as programming adapter.
The seconds (called USER USB) is connected to the STM32F303 chips you program
So what you can do is to configure your STM32 to implement a CDC over USB. With the windows driver installed (automatic or from ST, depends on OS version) you should get a virtual com port in your device manager. If you don't have the driver, you also get a device labeled as virtual com port but with a yellow exclamation mark.
So if I get you question right, this is what you're trying to do? Then yes, "Connecting USER USB" is correct. No, you don't need an extension board.
How to resolve that? It depends:
Do you already see the device in your device manager as communication device or serial interface or something? Then only the CDC driver from ST is missing.
Or do you get an "Unknown Device" in your device manager? That is what I experienced.
In STM32CubeMX you need to enable the USB device (Peripehrals->USB)
In STM32CubeMX you need to select the USB stack (MiddleWares->USB_DEVICE->Communication Device Class)
Generate the code. If you are using HSI as clock source CubeMX will generate a error message you can ignore for now. For a real product you should use an external clock.
Note that there is a bug in CubeMX version 4.20. The code generator generates code which may not work if you select HSE as clock input source. Even if you go back to HSI, the error remains.
Compile an run the code. You maybe need to reset the board removing BOTH USB plugs
Windows should detect the board now.
Extra problem: The board is ... well. Tricky. If you only plug in the USER USB to your PC, it should work but Windows may also inform you that you have an UNKNOWN DEVICE because enumeration has failed.
Remove the plug again. Now, first plug in the other, ST-LINK USB to power on the board. Wait 1-2 seconds. Now plug in the USER USB. There seems to be a startup problem. Only using the USER USB for power supply and CDC seems to run in a race condition between boot and USB and USB enumeration fails. First powering the board and then plugging in removes this race condition (at least at my board)
Now Windows should enumerate the device and offer you a virtual com port. Actually you should get two of them: One "ST... STLink Virtual COM Port" and one "ST... Virtual COM Port". The seconds one is the one you are looking for.
I hope that was the answer on the question you had.
Thanks for the post, had the same issue, here is what I added
Approach: Turn-off USB lines programmatically by changing input to output, forcing it to zero and reenable them after around 1 second
Also used power-off and on from ST USB Libs
// Force Re-Enumeration by the USB Host
//
int aux_retrigger_usb()
{
GPIO_InitTypeDef GPIO_InitStructure;
// ST USB Function
PowerOff();
// Program Pin 12 USB_DP from Input to Output
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// Set USB_DP to 0
GPIOA->BRR |= GPIO_Pin_12 ;
// Wait for for minimum 32* 50msec , 1,6 secs
while(tim3_cnt%32!=0) ; while(tim3_cnt%32!=31) ;
// ST USB Functions
PowerOn();
USB_Init();
Virtual_Com_Port_Reset() ;
// Program Pin 12 USB_DP from Output to input
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStructure);
return 1 ;
}
So basically to avoid the power on race condition, the ports may be programmed
first to outputs and then released after 1 second.
I'm also struggling with the STM32F302. The USB is not recognized by the HUB Down stream port, and therefore does not appear in a device manager on PC(HUB's upstream port is connected to PC).
So, I made a deep search after I checked all the HW and SW.
It appears that 1.5Kohm resistor should be added on a DP, as F302 does not have the embedded one.
My design does not have neither, so hopefully, it will solve the issue tomorrow, so I have a hope for tonight)
You can read AN4879 by ST - the place I found these directions.
I have a GPS circuit board from china. The only information I can find on this thing is :"amoj GPS 04C www.amoj.com"
It has a serial (DB9) connection and I would like to determine how to putty into it or something.
How can I determine what the port settings that are required to access this?
Pictures below:
Photos in Dropbox
The Jupiter TU60 serial interface is 9600 8N1 by default. The only sentence it will output automatically is the flash checksum message about a second after power up. Google the datasheet for the device and it will let you know about this.
To have it output the position and other information, you must command it to do so. There is a default set of commands that are active after power up. They begin with ## and are from the protocol used by Motorola. Refer to the M12+ Users Guide and Supplement (available online) for information on how to use these commands. I have been able to enter them from Realterm. The only tricky part is calculating the checksum. You can use most hex calculators to do that.
According to the datasheet, the unit goes into survey mode automatically and after about 24 hours goes into position hold. The 1PPS and 10KHz signals are valid to less than a microsecond after a few minutes after power up and to 50nS after a day. I have compared this to another standard I have to verify this. You can use the ##Ea command to get the status of the unit and the M12+ Manual will tell you how to decode it.
Look for $GP... messages at 4800 and 9600BPS as yegorich suggest. Common NMEA messages output by GPS devices are $GPGGA, $GPVTG, $GPRMC.. If you find that data coming out, use Google to look up NMEA 0183 sentence structure and you will have what you need...
I have the same board with the Navman jupiter T Tu60 GPS 1pps 10khz GPS Module on it. I just received my sma antenna and have hooked it up. I am using 12.6V power to the centre pin.
It outputs 1pps on the led with no signal, so that is not to be trusted. Mine is labeled 1pps and 10khz underneath the pcb but these are actually swapped! I put the 10KHz output on my dso and get a 10KHz square wave 50% duty cycle signal but there is ringing on the waveform rise so I have to set the trigger level to 0.8v to get the dso to register the 10KHz frequency. I suspect this may be because the output expects a load and is not seeing one. Now, was I using ac or dc coupling?
I too am getting nothing on the serial. I tried 9600, 4800 using putty on com1 (I have a nice old motherboard) and then tried reversing rx and tx but no luck. As of now I am checking out the serial signals with the dso to see if I can work out what is happenning. I suspect that these boards are rubbish, and useful as power supplies only.
It reads 10.0000 on my hp 5328a counter and sometimes reads 9.9999. It would be nice to be able to talk to the gps to see whether it has satellite lock.
Please let me know how you get on and if you find out any further info.
Brett VK6EZ.
I'm trying to build a device to read the current GPS coordinates. The device will include a small computer inside running Windows 7.
I'm looking for a usb GPS to connect it to the computer and be able to read the GPS coordinates from my VB.net 2010 program. Of course, here the most important thing is what hardware I need to accomplish that. Suggest me some GPS models.
Do I need only a GPS receptor or do I need even more hardware?
In addition to jcibar's answer:
For Bluetooth GPS or most USB devices you probably don't even have to set the classic RS232 communication settings like "baud rate". It will just work, whatever baud rate you set.
Look at the "Ports (COM & LPT)" list of the Windows Device Manager - One of the "COM" devices listed should be the GPS receiver and it many times includes a description that indicates what it is.
E.g. on my Win7 x64 notebook I have a "Sierra Wireless Gobi 2000 HS-USB NMEA 9001 (COM8)" port, which is the notebook's built-in GPS. It will just start communicating the moment I open the port:
17.09.2013 10:12:01.890 [RX] - $GPGSA,A,1,,,,,,,,,,,,,,,*1E<CR><LF>
$GPGSV,4,1,16,10,,,,21,,,,20,,,,32,,,*7A<CR><LF>
$GPGSV,4,2,16,31,,,,30,,,,29,,,,28,,,*78<CR><LF>
$GPGSV,4,3,16,27,,,,26,,,,25,,,,24,,,*79<CR><LF>
$GPGSV,4,4,16,23,,,,22,,,,19,,,,18,,,*7E<CR><LF>
$GPGGA,,,,,,0,,,,,,,,*66<CR><LF>
$PQXFI,,,,,,,,,,*56<CR><LF>
$GPVTG,,T,,M,,N,,K,N*2C<CR><LF>
$GPRMC,,V,,,,,,,,,,N*53<CR><LF>
You can use any serial COM port / RS232 logger to test this.
You can use any GPS (USB, Bluetooth) that provides a RS232-level serial interface (serial port). The GPS will create a virtual serial port (e.g. COM13) that you can use in your VB.net program to read serial data (NMEA frames tipically at 4800 bauds).
For instance, for USB you could use something like this: Haicom HI-206USB.
I am trying to access an USB HID device under Ubuntu(kernel-3.0). I want to write a program which could notify me whenever an USB device is attached to the bus i.e is there any event generated whenever an USB device is plugged in which I can monitor. I have looked into DBus and HAL without any success. But I don't want linux to load its current modules(USBHID and HID) when the device is plugged in. I also want to ask if the mentioned modules are also the device drivers used for HID devices.
My sole purpose is to run a script whenever an USB device is plugged into the bus which will indirectly call the above mentioned modules.
I am writing my code in C. I am quite new to linux. So it would be of great help if anyone could point me in the right direction.
Thanks..
The UDisks deamon will send the D-Bus signal "DeviceAdded" when a USB drive is inserted, and probably another "DeviceAdded" for each partition on the drive. If you have automount you would also get a "DeviceChanged" signal when the partition(s) are mounted. You can then query the UDisks interface, as well as individual devices about their properties, for example. You can find more info on the UDisks interface here: http://hal.freedesktop.org/docs/udisks/UDisks.html
One way to get more familiar with what goes on with block devices (or whatever) on D-Bus, is to install and use D-Feet to inspect the bus. UDisks appear on the System bus. You can see what is there and inspect the properties for individual devices as well as the UDisks interface itself.
Another way, which would also allow you to see what signals are transmitted on the bus, is to run dbus-monitor from the command line.