I few years ago (or longer) I create an image where I wrapped an image around itself as in the image attached to make a sort of world. I've tried to duplicate the process but missing the step of wrapping it around. I know that I squared the image and left extra transparent space on both sides. I have the original photoshop file but the layer that I need to know what I did is flattened. Please send me to a tutorial or maybe give me an idea what I did to create this effect. Pretty lame I know!!!
Photo of barn windmill and house.
If your image is landscape, this method will work a lot better.
Make sure the image you're distorting is square, but don't do this by cropping, actually 'squish' the width of the image so that it distorts it slightly.
Then flip the image updide down (180degs)
Then apply a filter: Filter > Distort > Polar Coordinates.
From personal experience it's important to make sure the center of the square has uniform patterns and color to it, this will help avoid too much distortion in the center. Although this can be achieved post-filter.
Related
The question is very simple. I just want to draw a simple circle around some part of an image with mouse. Not a fancy circle. It can be not at all a complete circle. I just want to circle around some part of an image to make it stand out inside the image.
As simple as this task is, I did not find any solution on google as it always proposes me very complex tasks like how to draw a circle and the like, which are not at all what I want. The problem is that Gimp is very powerful and so non-intuitive for very simple use cases. Any help will be appreciated as it will free me of doing all these changes under windows on another computer and sending the images via email and etc.
Quickest:
Make a circle selection with the Ellipse select tool (you can constrain it to a circle by depressing the Shift key after you start dragging).
Edit > Stroke selection (use preferably "Line" mode, that will also allow you to make a dotted line).
This said, to annotate images there are better alternatives.
I've been searching around the web about how to do this and I know that it needs to be done with OpenCV. The problem is that all the tutorials and examples that I find are for separated shapes detection or template matching.
What I need is a way to detect the contents between 3 circles (which can be a photo or something else). From what I searched, its not to difficult to find the circles with the camera using contours but, how do I extract what is between them? The circles work like a pattern on the image to grab what is "inside the pattern".
Do I need to use the contours of each circle and measure the distance between them to grab my contents? If so, what if the image is a bit rotated/distorted on the camera?
I'm using Xamarin.iOS for this but from what I already saw, I believe I need to go native for this and any Objective C example is welcome too.
EDIT
Imagining that the image captured by the camera is this:
What I want is to match the 3 circles and get the following part of the image as result:
Since the images come from the camera, they can be rotated or scaled up/down.
The warpAffine function will let you map the desired area of the source image to a destination image, performing cropping, rotation and scaling in a single go.
Talking about rotation and scaling seem to indicate that you want to extract a rectangle of a given aspect ratio, hence perform a similarity transform. To define such a transform, three points are too much, two suffice. The construction of the affine matrix is a little tricky.
I'm working with documents, so maintaining the the original image dimensions and subsequent dpi is important.
The aspect ratio is always maintained so the automatic fill modes and alike don't seem to have any effect.
Say I have a 300 dpi document and the user want to clear an inch border around the image. So I need an inch cropped from the image but the result needs to be the original image dimensions (2550x3300).
I have been able to achieve this effect with...
...&crop=300,300,-300,-300&margin=300,300,300,300
This works, but seems more than a little clunky. I've tried a lot of other combinations but they all seem to enlarge or reduce the image size which is undesirable in my case.
So does someone know a simpler syntax to achieve the desired result, or do I need to re-size the image then calculate and fill with a margin as I'm doing now.
Thanks
It turns out that my example requests the image in it's full size which turns out to be a special case. When I introduce a width or height into the command line things don't work very well since crop size is in respect to the original image dimensions and margin size is in respect to the result image.
Thinking about it more I abandoned the crop approach. What I really needed was a way to introduce a clipping region into the result bitmap. So I built an extension to do just that. It works well as it doesn't interfere with any of Resizer's layout calculations and the size of the returned image is whatever the height or width were specified as. Which is just what I needed. The Faces plugin has an example of introducing a clipping region.
Karlton
Cropping and re-adding 300px on each edge is best accomplished exactly the way you're doing it:
&crop=300,300,-300,-300&margin=300
What kind of improved syntax would you expect? This isn't a common operation.
I have been looking for the solution on the web for a long time. Most tutorials are fairly simple about adding shadow to a UIView. I also noticed that if we add a shadow to an UIImageView. The shadow shape could perfectly fit the shape of the content image if the image itself has alpha channel in it. Say for example, if the image is an animal with transparent background, the shadow shape is also the same as that animal (not a rectangle shadow as same as UIImageView frame).
But these are not enough. What I need to do is to add some changes to the shadow so it may have some rotation angle and compressed (squeezed or shift) effect so that looks like the sunlight comes from a certain spot.
To demonstrate what I need, I upload 2 images below, which I captured from the Google Map App created by Apple. You can imagine the Annotation Pin is an image which has the Pin shape, so the shadow is also "pin shaped", but it is not simply "offset" with a CGSize, you can see the top of the shadow is shifted right about 35 degrees and slightly squeezed the height.
When we tap and hold and pin, the shadow is also animated away from the pin, so I believe that such shadow can be made programmably.
The best shadow tutorial I can found so far is http://nachbaur.com/blog/fun-shadow-effects-using-custom-calayer-shadowpaths But unfortunately, that cannot make this effect.
If anyone know the answer or know any better words to search for, please let me know. Thank you.
(Please note that the shape of the image is dynamic in the App, so using any tool like Photoshop to pre-render the shadow is not an option.)
In order to create dynamic effects like this, you have to use Core Graphics. It's incredibly powerful once you know how to use it. Basically you need to set a skew transform on the context, set up a shadow and draw the image. You will probably have to use transparency layers as well.
It doesn't sound like you can use CALayer shadows, since that is meant to solve a specific use-case. The approach Apple takes with the pin marks on the map is to have two separate images that are created ahead of time (e.g. in Photoshop) and they position them within the map relative to a reference point.
If you really do need to do this at run-time, it should still be possible by using either Core Graphics or ImageKit. To get a blurred shadow appearance, you can use the kCICategoryBlur CIFilter. You can then convert the image to grayscale. And to get that compressed look you just need to resize and skew the image.
Once you have two separate images, you can either take the CGImageRef for the shadow image and can set that as the content of another sublayer, or you can add it as a separate view.
If you know what all the shapes are, you could just render a shadow image in Photoshop or something.
I am a coder but not a graphic maker. I can decently produce graphics that meet the quality standards visually although I cannot produce graphics that will technically "work." This is what I mean:
I am using CGRectIntersectsRect for colliding images. My image has SOME extra space which I have made completely transparent using Adobe PhotoShop but even if this extra transparent space is not visible, when the two images collide, it will look like you will be hitting nothing as this extra invisible transparent space is PART of the image and when CGRectIntersectsRect is called it detects touch between two images. So if the other image touches the transparent space, CGRectIntersectsRect is called and my code is executed. I only want my code to be executed if it hits the actual COLOR space of the image. Here is two things that could help me through that, they follow through with questions.
Learn how to make NO EXTRA SPACE on an image in photoshop. How could I do this, tutorials?
CGRectIntersectsRect only called when touching a color part of an image. A way to do this?
Thank you guys!
Regarding your question #1, it depends. All images are rectangular, all. So, if your sprite is rectangular, you can crop it in Photoshop to just the rectangular area. But if you want to handle, say, a circle ball, then you can't do such thing as "remove extra space". Your circle ball will always be stored in a rectangular image, with transparent space on the corners.
Learn how to make NO EXTRA SPACE on an image in photoshop. How could I do this, tutorials?
You can manually select an area using the Rectangular Marquee Tool and Image > Crop or automatically trim the image based on an edge pixel color using Image > Trim.
CGRectIntersectsRect only called when touching a color part of an image. A way to do this?
You can use pixel-perfect collisions or create better bounding shapes for your game objects. For example, instead of using pixel-perfect collision for a spaceship like this one, you could use a triangle for the wings, a rectangle for the body, and a triangle for the head.
Pixel-perfect collision
One way you could implement it would be to
Have an blank image in memory.
Draw visible pixels from one image in blue (#0000ff).
Draw visible pixels from the other image in red (#ff0000).
If there's any purple pixels in the image (#ff00ff), then there's an intersection.
Alternative collision detection solution
If your game is physics-based, then you can use a physics engine like Box2D. You can use circles, rectangles, and polygons to represent all of your game objects and it'll give you accurate results without unnecessary overhead.
For collision detection for non-rectangular shapes, you should look into one of the many game and/or physics libraries available for iOS. Cocos2d coupled with Box2d or chipmunk are popular choices.
If you want to do it yourself, you'll need to start with something like a custom CGPath tracing the actual shape of each object, then use a function like CGPathContainsPoint (that's from memory, it may be wrong). But it is not a simple job. Angry birds uses box2d, AFAIK.