Q: How to run test for only csproj under certain top-level folder in AzureDevOps?
I have tried every version of this setup I can think of but I just can´t get the test task in AzureDevOps to just find and run/test the projects found in a particular folder.
When this runs it tries to run test on every .csproj in the solution and not just under the Working Directory.
what am I doing wrong?
just use *. csproj? that should only look in the current folder.
Related
I'm attempting to run some selenium tests in my solution that are in a project called SA.SEPA.Web.UI.Selenium as part of a build definition in VSTS, but it is failing to run the Visual Studio Test task with the error...
No test assemblies found matching the pattern: **\*Selenium*.dll.
Search folder is set to - $(System.DefaultWorkingDirectory)
Preceding tasks are a nuget restore and build solution
Can anyone help?
You are specifying $(System.DefaultWorkingDirectory) as the search folder. By default (unless overridden), this points to the Source folder on the Agent.
If you are instructing MSBuild (using the OutDir parameter) to output your assemblies in a specific location then you should use that location.
Edit: If this is an On-premises Agent, it should also be running in interactive mode (not service) if you want to execute any UI tests
I ran into this same error but it was a different cause, so I'm adding my solution here.
I was getting the "no test assemblies found" error when trying to run Selenium tests with VSTS as part of a build.
My problem turned out to be that the test assemblies were not checked into change control (git, through VS2017), and therefore were not part of the build. The folders that contain the test assemblies were ignored during my original check-in by default. Once I added those folders to my repository, the build could find the tests and run them.
So coming across a very strange issue with MSbuild using TFS 2015 build definition.
The web application I am trying to build has multiple csprojs that are used as class libraries throughout the application and of course my actual web application.
Bellow are the MSBuild arguments I am passing through currently to get a fully completed build.
/p:UseWPP_CopyWebApplication=True
/p:PipelineDependsOnBuild=False /p:OutDir=C:\Agent\_work\1\s\Application\Package\bin\
/p:WebProjectOutputDir=C:\Agent\_work\1\s\Application\Package\WebSite\
/p:NoWarn=0067
/v:Minimal
What I would actually like to do is the following.
/p:UseWPP_CopyWebApplication=True
/p:PipelineDependsOnBuild=False /p:OutDir=C:\Agent\_work\1\s\Application\Package\Website\bin\
/p:WebProjectOutputDir=C:\Agent\_work\1\s\Application\Package\WebSite\
/p:NoWarn=0067
/v:Minimal
The issue I run in to is after the first assemblies are run and placed in the bin folder it then works on the main webproject csproj and throws a unable to locate file for copy message.
I don't understand why this would be the case? Is it because MSBuild is expecting the bin folder to be empty/not there?
Am I missing something in the build order or different Argument needs to be passed. I have also to tried 'outpath' as well.
In the second arguments, the "OutDir" path is the same with "WebProjectOutputDir". This cause the issue since MSBuild will clean the "WebProjectOutputDir" folder before run "_WPPCopyWebApplication" task which copies files to "WebProjectOutputDir" folder. That means the files generated in "OutDir" during the build will be cleaned because it use the same path with "WebProjectOutputDir", so the task will cannot locate the files to copy.
To avoid this issue, you'd either change the "OutDir" different with "WebProjectOutputDir" or add one more arguments:
/p:CleanWebProjectOutputDir=False
I want to build a project with a particular named Build Configuration, let's call it Conf-A.
This is running as an MSBuild step on TeamCity. When the build runs, it spits out:
The OutputPath property is not set for project ... You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project.
This project is part of a hulking great solution we load on our dev machines.
The error makes sense for my situation, since I'm building just the proj file, but I don't want to use the solution file since I'm trying break-up this monolithic app.
I want the build-server to treat this project as it's own component, even if for the moment it is part of a solution and has references to other projects (assemblies) in the solution.
Must I build this via a solution file?
I could potentially copy the solution file and prune off all the other projects that are not required, but that's more complexity.
(Maybe the error is a red-herring).
you dont need to build a sln. Its like the error says. You just havent specified a value for the variable OutputPath in your msbuild. You can add it to your files or you can pass it in at the cmd line - msbuild someproj.proj /p:OutputPath=C:\notallovermydrive
We're pretty new to TeamCity at work. We have a build & deployment pckage setup which is using MSBuild/MSDeploy to ship changes to our web servers. However, we have a few issues (apologies for putting a few questions on the same post). For clarification our solutions looks like so:
Project Folder
WebApp (includes .csproj file. Includes a folder called "media" - this folder is not in SVN)
Libraries (includes referenced assemblies)
Our issues:
There is a specific folder within the Libraries folder that must be copied into the bin directory after build (because of an assembly redirect). We have always used a PostBuild event, however this doesnt work in TeamCity.
The folder "media" within the WebApp folder is not included in SVN. When the TeamCity package is executed it deletes this folder. I would like to prevent TeamCity from deleting just this folder.
When we run the TeamCity task, we get an ERROR_FILE_IN_USE error for one of the files teamcity is trying to delete during the sync task. I have read about using the app_offline.htm file to combat this - but quite how Im not sure.
I'm going to guess that some of these settings can be command line parameters in the msbuild job - I think it would be better to store these in the csproj file rather than just in teamcity if it is possible?
thanks in advance
Al
A few questions on the information provided
Can you clarify what you mean by post-build command doesnt work? Does it fail or does it just not do what you expect?
How have you setup your post-build command? does it reference specific filepaths? TeamCity executes MSBuild in the same was as you could from the command line or from visual studio.
Regarding the MSDeploy folder issue, you can configure MSDeploy with a Skip Action, here's a link to another post describing how to do this
Prevent MSDeploy (selectively) from deleting folders on target IIS server
Because MSDeploy is trying to deploy into a folder being used by IIS you are also seeing the file locking issue. There are two solutions
1. Add a teamcity step to stop IIS (using PowerShell) before deploying. This will cause downtime.
2. Deploy to a different folder and then switch IIS to point to your new folder. This is a much better solution as you also have roll back.
A much easier solution to all of this is to use a Deployment Tool such as Octopus Deploy to deploy your application. You can learn more about Octopus Deploy at http://octopusdeploy.com/
I am using MSbuild to create a deployment package (simply copying various files from the projects in my solution to different folders) I would like the root folder to be of the format
DeploymentPackage2.3.4.5ForRelease
How can I get MSbuild to put the Assembly number in the folder name automatically?
EDIT:
The solution has a great deal of projects in it (too many really) they all get their version number from a SharedAssemblyInfo.cs file that is manually updated but in the fullness of time will pick up the svn build number (but that is a job for later)
I am building using an external .bat file that calls a custom written .targets/.proj setup that simply calls msbuild on the .sln of the solution.
The 'create package' step I am trying to create happens after a succesful build and will eventually be run by our CI framework, however I would like to be able to run it locally too.
I have created a "CreatePackage" target that does the copying that I want, however it is currently into a fixed folder. I need the folder name to reflect the AssemblyVersion of one of the final dll's.
If there is a better way then I want to know about it... but I am going to use this I think
MSBuild Task to read version of dll