I have installed XAMPP 7.2.10 on my Win 10 and other services like Apache and MySQL are working fine.
But the Tomcat service is not starting and is throwing an error as:
"Tomcat Started/Stopped with errors, return code: 1,
Make sure you have Java JDK or JRE installed and the required ports are free,
Check the "/xampp/tomcat/logs" folder for more information"
XAMPP Tomcat error image
I have installed Java JDK in "C:\Program Files\Java" and have set the environment variables path.
I have set the "JAVA_HOME" variable path as "C:\Program Files\Java\jdk-10.0.2"
Also, no other program is using the required ports.
When I run the "catalina_start.bat", I get error as:
"ERROR: The system was unable to find the specified registry key or value.
. [XAMPP]: Cannot find current JDK installation!
. [XAMPP]: Cannot set JAVA_HOME. Aborting ..."
What mistakes have I made here?
I had the same problem (XAMPP 7.3.0 / Windows Server 2016 / Java 11). I first checked the environment variables, the java installation - all seemed to be fine.
Sadly the XAMPP error message is not very meaningful, so i looked inside of tomcat installation. To my surprise XAMPP 7.3.0 uses a very old version of Apache Tomcat (7.0.56 from 2014!), that don’t work well with Java 9+. The reason is Tomcat 7.0.56 uses the "-Djava.endorsed.dirs" option, that is no longer supported in Java 9+. Up-to-date Tomcat versions have no problem with java 9+. To solve this you can just stay with Java 8 (if possible for you) or try to fix this on your own by modify Tomcat start-up: Go to your \xampp\tomcat\ folder and see this fix in Tomcat 7.0.73 doesn't work with java 9.
But i would recommend you to install a up-to-date version of tomcat and don’t use the XAMPP one (what i finally did) - at least until XAMPP updates there tomcat version .
Related
I have XAMPP installed on Windows 7 virtual machine. My old PHP version was 7.0.9 with Apache 2.4
I needed to upgrade the PHP version to 7.1.x and I set out reading about how to best to this. In end, I settled with the simple plan:
Stop Apache service
Downloaded new PHP version from official php website. For PHP 7 the 7.1.17 version was listed. I downloaded the thread safe version, as my Apache has thread safety enabled.
I extracted the contents of the downloaded archive to a folder.
I copied and replaced all files in the appropriate folders from C:/Server/php with the new php version files from the extracted archive.
I attempted to start Apache from the XAMPP control panel and the server will not start.
The message "Attempting to start Apache service..." just hangs and nothing happens.
The last entry in the error.log file in C:\Server\apache\logs shows the event when the server was stopped and that's it.
When I check the php version from CLI with the command php -v, the console returns installed php version 7.1.17
I tried different suggestions I read from similar questions, like changing ServerName localhost:80 to ServerName localhost:8080 and copying php7apache2.dll to apache/bin ( as suggested here: Upgrading PHP in XAMPP for Windows? ), alas the issue is not fixed and Apache does not start.
Of course, I also restarted the virtual machine, all the same.
At this point, I'm dumbfounded. Don't know what to do.
I need to get Apache running with php 7.1, as it is required by Magento 2.2.4. I do not want to reinstall XAMPP, as this will be a lenghty process with a lot of risk for more things to go wrong.
Any help is much appreciated!
Alright, so after checking Windows Logs > Application in Event Viewer I saw the error ".. the Apache service named is not a valid win32 application". I downloaded the x86 version of PHP from official website PHP for Windows
Then copied and replaced files as described above, and Apache started successfully.
To see if your Apache version is x64 or x86 open command prompt and cd to your Apache bin directory, in my case C:/Server/apache/bin , then run:
file httpd
i have installed apache tomcat 8.5 one month ago with java 1.8 on Windows Server 2008 and it works ok.
now the service is stopped and i'm not able to restart it from apache configuration or Windows Services . It is always stopped.
i got the following error: "service terminated with service specific error incorrect function".
ther error in Windows Event viewer does not saying nothing more:
even its details tab:
What can i do?
I was trying to install Apache Tomcat/8.5.31 as Windows service and i was also facing the same error.
For me what finally worked was following these steps. Go to Tomcat installation directory's bin folder. You will see two EXEs (tomcat8.exe and tomcat8w.exe). tomcat8w.exe is a GUI application for monitoring and configuring Tomcat services. Double-click it and then go to Java tab
1) Enable the check box for Use default
2) In Java Classpath: section, specify the path to bootstrap.jar and tomcat-juli.jar. These should be present in your tomcat installation's bin directory itself:
<path_to_tomcat_installation>\bin\bootstrap.jar;<path_to_tomcat_installation>\bin\tomcat-juli.jar
To get more help, you may check the log at the following location provided you installed your Tomcat as Windows service using default LogPath option as described in the documentation: %SystemRoot%\System32\LogFiles\Apache
UPDATE: In another recent installation, i noticed that despite having configuration settings exactly similar to another working setup, i was still getting Incorrect function error under System log in Event Viewer. This time, i had to uncheck the Use default option and had to explicitly provide path to jvm.dll as shown below:
Java Classpath setting was still required as explained above.
Currently I have a Windows Server 2012 R2 Datacenter running Tomcat 9 & had the same problem. This happened after I ran Windows updates & restarted the Server.
Error messages below. (The blanked out text is my private data.)
Error showed when attempting to start the service.
Error in System Event Log
The following steps fixed the issue...
Navigate to your tomcat9w.exe Location: \Tomcat9\bin\
Right click your tomcat9w.exe and select Run as administrator.
Select the Java tab. Select Use default, Apply, & OK
Start your service.
Note: I unchecked the "Use default" box after I was able to get the service running correctly. Because I wanted to retain my existing configuration. Going forward the service has continued to work correctly.
Hope this helps!
I was also facing some issue with Tomcat 9 and Java 13 (tried all previously mentioned solutions but nothing worked). When I downgraded it to Java 11 and Pointed the jvm.dll from JDK 11 my issue got fixed (or Use Default if JAVA_HOME is set to Java 11).
In my case the only way I could get it to work, was to go to the "Startup" tab and change "Mode" from "JVM" to "Java". After that, it started fine and was able to confirm that by visiting the localhost.
(Definitely not an expert)
I fixed this issue by (re)installing Java. I was using the Java SDK downloaded by IntelliJ. Although I was able to direct Tomcat to that download during installation, it returned this "error service terminated" message at runtime. Instead I installed Java SDK directly from Oracle, Tomcat found the installation immediately during installation (I didn't need to point it), and this error disappeared.
It's possible the Java installation by IntelliJ was incomplete somehow and is the underlying cause of the problem, but I am definitely not an expert.
I fixed the issue by reinstalling Tomcat:
Search the Command Prompt icon
Right-click on it
Select Run as administrator
Change the folder to the bin folder of Tomcat
Execute appserver uninstall
Execute appserver install
It solved my problem.
I followed the below steps to fix the the above issue. it may help if someone still face the same.
Step 1. opened the installation directory : tomcat9w.exe Location: \Tomcat9\bin\
Step 2. Browsed the Jvm.dll path under "Java Tab" in Tomcat where it has installed
Step 3. Run the service but still faced same.
Step 4. then, Opened ""C:\Program Files (x86)\Apache Software Foundation\Tomcat 9.0\bin>startup.bat --> entered.
Finally it got fixed .
I have installed the Weblogic 12c (12.1.3) on my Windows 7 machine. After creating the Admin server and logging in, I am trying to create a new Managed Server. But when I press the create button, it takes a lot of time showing the loading symbol and finally gives the error Timed out waiting for completion: Activate State: STATE_DISTRIBUTED Target Servers States: AdminServer STATE_DISTRIBUTED.
Earlier I was working on weblogic 10.3.2 and it was working fine, but after this installation it gives me the error and I am unable to create a new Managed Server.
My JAVA_HOME is pointing to JDK 1.8 currently. Also there is this entry in the PATH variable which is something like 'C:\ProgramData\Oracle\java\javapath' which has 3 SYMLINKS to java.exe, javaw.exe and javaws.exe to my JRE 1.8 instead of the JDK 1.8. I uninstalled the JRE and just kept the JDK for the time being but still did not work.
Please advice.
Was able to find the solution for it. Pointed my JAVA_HOME back to JDK 1.7 and at the same time changed the port of NodeManager from the default 5556 to 5557 and was able to successfully create and link the Machine and the Managed Server.
I am Using Ubuntu 12.04 and i want to run OpenLaszlo 4.9.0 in my system. I have read many tutorial, e.g.
http://wiki.openlaszlo.org/Installing_OpenLaszlo#Installing_the_DevKit_on_Unix.2FLinux
that say that put server in JAVA_HOME but i do not know where is JAVA_HOME in Ubuntu 12.04.
I have OpenLaszlo also . But I do not know how to start server of OpenLaszlo and where to put it? or how many things required for it? please tell me. I have Red5 server,i have install java-7-openjdk.
Thanks in advance.
JAVA_HOME is an environment variable. It stores the path to java runtime environment (jre). You can have several JVMs installed on your system, of course. So JAVA_HOME defines the default one.
Setting this variable after installing Ubuntu package from the repository is a little tricky. It is discussed, for example, here:
Jenkins, specifying JAVA_HOME,
What is the correct target for the JAVA_HOME envrionment variable for a Linux OpenJDK Debian-based distribution?
OpenLaszlo is a Web-application that should be run under some application server (usually Apache TomCat or its derivatives such as IBM WebSphere Application Server Community Edition).
It is available on the off.site as a bundle that includes TomCat and also as a .war file (a servlet) that should be deployed under your application server.
In the 1st case you can extract an archive wherever you want (read carefully about file permissions). But at the moment the server starts it needs Java system files so JAVA_HOME should be already defined.
I can't figure out where I am going wrong. I have Eclipse Indigo, JBoss 7.1, JBoss Tools installed. I have this configuration working on my Windows7 64-bit system. I am attempting to set up a co-worker's Windows XP 32-bit machine with the same configuration but am not able to get the server to launch. I have configured the server but when I attempt to start the server, I get an error indicating that it was unable to start the server but there is no specific error listed.
I am able to start JBoss from the command prompt using the standalone.bat file.
I am able to configure the standalone.xml file from within Eclipse. I have confirmed this by checking the file in the standalone/configuration directory.
When I attempt to publish the project from within Eclipse, it does not publish.
Nothing gets written to server.log
The startup parameters match what I have on my computer.
I can't figure out what I am missing. Any suggestions would be appreciated!
Edit:
I have done some more checking. I am able to publish to the server and I am able to start the server (with the published application) fine from the command prompt. That part works. When I attempt to start the server from within Eclipse it gives me "Server JBoss 7.1 Runtime Server failed to start." It never writes anything to the console tab in Eclipse either so I can't tell why it is failing to start.
Also in the Servers tab, there is an entry called "Server Details". When I expand that entry, it says "Not Connected".
The answer to my problem is that Eclipse had be configured to use the java JDK, not the JRE. As soon as I switched over to use the JDK it started working fine. For some reason JBoss will start under 64-bit windows with the JRE but under 32-bit you need to use the JDK. I found the answer here: https://community.jboss.org/thread/169097