Can't launch JBoss7 from Eclipse Indigo - jboss7.x

I can't figure out where I am going wrong. I have Eclipse Indigo, JBoss 7.1, JBoss Tools installed. I have this configuration working on my Windows7 64-bit system. I am attempting to set up a co-worker's Windows XP 32-bit machine with the same configuration but am not able to get the server to launch. I have configured the server but when I attempt to start the server, I get an error indicating that it was unable to start the server but there is no specific error listed.
I am able to start JBoss from the command prompt using the standalone.bat file.
I am able to configure the standalone.xml file from within Eclipse. I have confirmed this by checking the file in the standalone/configuration directory.
When I attempt to publish the project from within Eclipse, it does not publish.
Nothing gets written to server.log
The startup parameters match what I have on my computer.
I can't figure out what I am missing. Any suggestions would be appreciated!
Edit:
I have done some more checking. I am able to publish to the server and I am able to start the server (with the published application) fine from the command prompt. That part works. When I attempt to start the server from within Eclipse it gives me "Server JBoss 7.1 Runtime Server failed to start." It never writes anything to the console tab in Eclipse either so I can't tell why it is failing to start.
Also in the Servers tab, there is an entry called "Server Details". When I expand that entry, it says "Not Connected".

The answer to my problem is that Eclipse had be configured to use the java JDK, not the JRE. As soon as I switched over to use the JDK it started working fine. For some reason JBoss will start under 64-bit windows with the JRE but under 32-bit you need to use the JDK. I found the answer here: https://community.jboss.org/thread/169097

Related

No dropdown option of IntelliJ in IDE version of Remote Development using SSH in JetBrains Gateway

I am trying to connect to a remote server using JetBrains Gateway, so that I can use IntelliJ IDE for code changing purposes.
Both IntelliJ and JetBrains Gateway are -newly installed- on my device and I've rebooted my PC after installation as well.
I entered the hostname, password and it says that I'm "Successfully Connected".
But in the IDE version dropdown, nothing shows up even though I have IntelliJ installed on the system.
I do see the Other options... link. But the following options seem like they are to be used if no IDE is installed :
My Question is
How to get IntelliJ IDE (which is already installed) in the dropdown of JetBrains Gateway
You need to run a script to turn the server on
"The main script to run a remote IDE is remote-dev-server.sh, located in the bin subdirectory of your unpacked IDE"
From the Jetbrains instructions here

XAMPP tomcat service is not starting with error as "Tomcat Started/Stopped with errors, return code: 1"

I have installed XAMPP 7.2.10 on my Win 10 and other services like Apache and MySQL are working fine.
But the Tomcat service is not starting and is throwing an error as:
"Tomcat Started/Stopped with errors, return code: 1,
Make sure you have Java JDK or JRE installed and the required ports are free,
Check the "/xampp/tomcat/logs" folder for more information"
XAMPP Tomcat error image
I have installed Java JDK in "C:\Program Files\Java" and have set the environment variables path.
I have set the "JAVA_HOME" variable path as "C:\Program Files\Java\jdk-10.0.2"
Also, no other program is using the required ports.
When I run the "catalina_start.bat", I get error as:
"ERROR: The system was unable to find the specified registry key or value.
. [XAMPP]: Cannot find current JDK installation!
. [XAMPP]: Cannot set JAVA_HOME. Aborting ..."
What mistakes have I made here?
I had the same problem (XAMPP 7.3.0 / Windows Server 2016 / Java 11). I first checked the environment variables, the java installation - all seemed to be fine.
Sadly the XAMPP error message is not very meaningful, so i looked inside of tomcat installation. To my surprise XAMPP 7.3.0 uses a very old version of Apache Tomcat (7.0.56 from 2014!), that don’t work well with Java 9+. The reason is Tomcat 7.0.56 uses the "-Djava.endorsed.dirs" option, that is no longer supported in Java 9+. Up-to-date Tomcat versions have no problem with java 9+. To solve this you can just stay with Java 8 (if possible for you) or try to fix this on your own by modify Tomcat start-up: Go to your \xampp\tomcat\ folder and see this fix in Tomcat 7.0.73 doesn't work with java 9.
But i would recommend you to install a up-to-date version of tomcat and don’t use the XAMPP one (what i finally did) - at least until XAMPP updates there tomcat version .

Apache Tomcat 8.5 . Error: Service terminated with service specific error incorrect function

i have installed apache tomcat 8.5 one month ago with java 1.8 on Windows Server 2008 and it works ok.
now the service is stopped and i'm not able to restart it from apache configuration or Windows Services . It is always stopped.
i got the following error: "service terminated with service specific error incorrect function".
ther error in Windows Event viewer does not saying nothing more:
even its details tab:
What can i do?
I was trying to install Apache Tomcat/8.5.31 as Windows service and i was also facing the same error.
For me what finally worked was following these steps. Go to Tomcat installation directory's bin folder. You will see two EXEs (tomcat8.exe and tomcat8w.exe). tomcat8w.exe is a GUI application for monitoring and configuring Tomcat services. Double-click it and then go to Java tab
1) Enable the check box for Use default
2) In Java Classpath: section, specify the path to bootstrap.jar and tomcat-juli.jar. These should be present in your tomcat installation's bin directory itself:
<path_to_tomcat_installation>\bin\bootstrap.jar;<path_to_tomcat_installation>\bin\tomcat-juli.jar
To get more help, you may check the log at the following location provided you installed your Tomcat as Windows service using default LogPath option as described in the documentation: %SystemRoot%\System32\LogFiles\Apache
UPDATE: In another recent installation, i noticed that despite having configuration settings exactly similar to another working setup, i was still getting Incorrect function error under System log in Event Viewer. This time, i had to uncheck the Use default option and had to explicitly provide path to jvm.dll as shown below:
Java Classpath setting was still required as explained above.
Currently I have a Windows Server 2012 R2 Datacenter running Tomcat 9 & had the same problem. This happened after I ran Windows updates & restarted the Server.
Error messages below. (The blanked out text is my private data.)
Error showed when attempting to start the service.
Error in System Event Log
The following steps fixed the issue...
Navigate to your tomcat9w.exe Location: \Tomcat9\bin\
Right click your tomcat9w.exe and select Run as administrator.
Select the Java tab. Select Use default, Apply, & OK
Start your service.
Note: I unchecked the "Use default" box after I was able to get the service running correctly. Because I wanted to retain my existing configuration. Going forward the service has continued to work correctly.
Hope this helps!
I was also facing some issue with Tomcat 9 and Java 13 (tried all previously mentioned solutions but nothing worked). When I downgraded it to Java 11 and Pointed the jvm.dll from JDK 11 my issue got fixed (or Use Default if JAVA_HOME is set to Java 11).
In my case the only way I could get it to work, was to go to the "Startup" tab and change "Mode" from "JVM" to "Java". After that, it started fine and was able to confirm that by visiting the localhost.
(Definitely not an expert)
I fixed this issue by (re)installing Java. I was using the Java SDK downloaded by IntelliJ. Although I was able to direct Tomcat to that download during installation, it returned this "error service terminated" message at runtime. Instead I installed Java SDK directly from Oracle, Tomcat found the installation immediately during installation (I didn't need to point it), and this error disappeared.
It's possible the Java installation by IntelliJ was incomplete somehow and is the underlying cause of the problem, but I am definitely not an expert.
I fixed the issue by reinstalling Tomcat:
Search the Command Prompt icon
Right-click on it
Select Run as administrator
Change the folder to the bin folder of Tomcat
Execute appserver uninstall
Execute appserver install
It solved my problem.
I followed the below steps to fix the the above issue. it may help if someone still face the same.
Step 1. opened the installation directory : tomcat9w.exe Location: \Tomcat9\bin\
Step 2. Browsed the Jvm.dll path under "Java Tab" in Tomcat where it has installed
Step 3. Run the service but still faced same.
Step 4. then, Opened ""C:\Program Files (x86)\Apache Software Foundation\Tomcat 9.0\bin>startup.bat --> entered.
Finally it got fixed .

Weblogic Server, Timed out waiting for completion, while creating a new server

I have installed the Weblogic 12c (12.1.3) on my Windows 7 machine. After creating the Admin server and logging in, I am trying to create a new Managed Server. But when I press the create button, it takes a lot of time showing the loading symbol and finally gives the error Timed out waiting for completion: Activate State: STATE_DISTRIBUTED Target Servers States: AdminServer STATE_DISTRIBUTED.
Earlier I was working on weblogic 10.3.2 and it was working fine, but after this installation it gives me the error and I am unable to create a new Managed Server.
My JAVA_HOME is pointing to JDK 1.8 currently. Also there is this entry in the PATH variable which is something like 'C:\ProgramData\Oracle\java\javapath' which has 3 SYMLINKS to java.exe, javaw.exe and javaws.exe to my JRE 1.8 instead of the JDK 1.8. I uninstalled the JRE and just kept the JDK for the time being but still did not work.
Please advice.
Was able to find the solution for it. Pointed my JAVA_HOME back to JDK 1.7 and at the same time changed the port of NodeManager from the default 5556 to 5557 and was able to successfully create and link the Machine and the Managed Server.

Where can I find Glassfish logs on Windows 7?

I can't find the Glassfish logs on windows 7. I would've expected a /glassfish/logs folder, but having searched the glassfish directory I don't see them.
It's inside /glassfish/domains/[domainname]/logs where [domainname] is the server domain name, which defaults to domain1.
Webnet are you running Glassfish from Netbeans?
I had the same problem expecting to find glassfish logs in C:\Program Files\glassfish-3.1.1\glassfish\domains\domain1\logs
I ended up finding them here:
D:\Users\myusername\.netbeans\7.0\config\GF3\domain1\logs
I installed glassfish along with netbeans and run it from within that ide. So it looks like because I am running within Netbeans it redirects the logs to that location.
If virtualization is being performed, try:
C:\Users\(user)\AppData\Local\VirtualStore\glassfish\logs