I am defining my own Item in and ItemGroup where I have custom values that I don't want to be evaluated to paths
When I try to do transforms, the ./ is being treated as a path and so I only get a single item for transforms and batching.
How can I force the . at the end to be treated as a literal?
For using special characters in the Include attribute you can use the hexadecimal representations of the ASCII characters. For example the symbol . will be represents as 2e. The percent symbol always precedes the hexadecimal representation: %2e.
You can get the full list of special characters to escape from the
official documentation.
Special characters to escape | ASCII to Hex text converter
Related
I'm trying to figure out the base regex to capture the middle of a google url out of a sql database.
For example, a few links:
https://www.google.com/cars/?year=2016&model=dodge+durango&id=1234
https://www.google.com/cars/?year=2014&model=jeep+cherokee+crossover&id=6789
What would be the regex to capture the text to get dodge+durango , or jeep+cherokee+crossover ? (It's alright that the + still be in there.)
My Attempts:
1)
\b[=.]\W\b\w{5}\b[+.]?\w{7}
, but this clearly does not work as this is a hard coded scenario that would only work like something for the dodge durango example. (would extract "dodge+durango)
2) Using positive lookback ,
[^+]( ?=&id )
but I am not fully sure how to use this, as this only grabs one character behind the & symbol.
How can I extract a string of (potentially) any length with any amount of + delimeters between the "model=" and "&id" boundaries?
seems like you could use regexp_replace and access match groups:
regexp_replace(input, 'model=(.*?)([&\\s]|$)', E'\\1')
from here:
The regexp_replace function provides substitution of new text for
substrings that match POSIX regular expression patterns. It has the
syntax regexp_replace(source, pattern, replacement [, flags ]). The
source string is returned unchanged if there is no match to the
pattern. If there is a match, the source string is returned with the
replacement string substituted for the matching substring. The
replacement string can contain \n, where n is 1 through 9, to indicate
that the source substring matching the n'th parenthesized
subexpression of the pattern should be inserted, and it can contain \&
to indicate that the substring matching the entire pattern should be
inserted. Write \ if you need to put a literal backslash in the
replacement text. The flags parameter is an optional text string
containing zero or more single-letter flags that change the function's
behavior. Flag i specifies case-insensitive matching, while flag g
specifies replacement of each matching substring rather than only the
first one
I may be misunderstanding, but if you want to get the model, just select everything between model= and the ampersand (&).
regexp_matches(input, 'model=([^&]*)')
model=: Match literally
([^&]*): Capture
[^&]*: Anything that isn't an ampersand
*: Unlimited times
I need to create an XPath query to select a JCR node whose name contains a whitespace character.
For instance: /jcr:root/foo bar/
But that results in an invalid query.
How should whitespaces be encoded in an XPath query?
Try using something like this XPath query:
/jcr:root/foo_x0020_bar/
The JSR-170 (JCR 1.0) specification defines how XPath can be used to query a JCR repository, and even though JSR-283 (or JCR 2.0) deprecated XPath as a query language, many of the implementations still support XPath along with the other query languages (including the more powerful JCR-SQL2).
Now, regarding the rules for escaping characters in XPath, JSR-170 states the following in Section 6.6.4.9:
The names of elements and attributes (corresponding to nodes and properties, respectively) within an XPath statement must correspond to the form in which they (notionally) appear in the document view. This means that spaces (and any other non-XML characters) within names must be encoded according to the rules described in 6.4.3 Escaping of Names.
Section 6.4.3 defines how such characters are escaped in names:
The escape character is the underscore (“_”). Any invalid character is escaped as _xHHHH_, where HHHH is the four-digit hexadecimal UTF-16 code for the character. When producing escape sequences the implementation should use lowercase letters for the hex digits a-f. When unescaping, however, both upper and lowercase alphabetic hexadecimal characters must be recognized.
Although you didn't ask about it, you can easily do the same query in JCR-SQL2:
SELECT * FROM [nt:base] WHERE ISSAMENODE('/foo_x0020_bar')
This is related to
What are the characters that count as the same character under collation of UTF8 Unicode? And what VB.net function can be used to merge them?
This is how I plan to do this:
Use http://msdn.microsoft.com/en-us/library/dd374126%28v=vs.85%29.aspx to turn the string into
KD form.
Basically it'll turn most variation such as superscript into the normal number. Also it decompose tilda and accent into 2 characters.
Next step would be to remove all characters whose sole purpose is tildaing or accenting character.
How do I know which characters are like that? Which characters are just "composing characters"
How do I find such characters? After I find those, how do I get rid of it? Should I scan character by character and remove all such "combining characters?"
For example:
Character from 300 to 362 can be gotten rid off.
Then what?
Combining characters are listed in UnicodeData.txt as having a nonzero Canonical_Combining_Class, and a General_Category of Mn (Mark, nonspacing).
For each character in the string, call GetUnicodeCategory and check the UnicodeCategory for NonSpacingMark, SpacingCombiningMark or EnclosingMark.
You may be able to do it more efficiently using regex, eg Regex.Replace(str, "\p{M}", "").
I would like a regular expression to find the %s in the source string that don't form the start of a valid two-hex-digit escaped character (defined as a % followed by exactly two hexadecimal digits, upper or lower case) that can be used to replace only these % symbols with %25.
(The motivation is to make the best guess attempt to create legally escaped strings from strings of various origins that may be legally percent escaped and may not, and may even be a mixture of the two, without damaging the data intent if the original string was already correctly encoded, e.g. by blanket re-encoding).
Here's an example input string.
He%20has%20a%2050%%20chance%20of%20living%2C%20but%20there%27s%20only%20a%2025%%20chance%20of%20that.
This doesn't conform to any encoding standard because it is a mix of valid escaped characters eg. %20 and two loose percentage symbols. I'd like to convert those %s to %25s.
My progress so far is to identify a regex %[0-9a-z]{2} that finds the % symbols that are legal but I can't work out how to modify it to find the ones that aren't legal.
%(?![0-9a-fA-F]{2})
Should do the trick. Use a look-ahead to find a % NOT followed by a valid two-digit hexadecimal value then replace the found % symbol with your %25 replacement.
(Hopefully this works with (presumably) NSRegularExpression, or whatever you're using)
%(?![a-fA-F0-9]{2})
That's a percent followed by a negative lookahead for two hex digits.
When I search one ldap server using the following filter
(cn=%*)
It return all results under the base dn? LDAP treat '%' specially? But I haven't found any description about it.
What is your directory server ?
Are you sure tha '%' is not replace by your command line interpreter or your compiler ?
According to RFC2254 % is not a special character
If a value should contain any of the following characters
Character ASCII value
---------------------------
* 0x2a
( 0x28
) 0x29
\ 0x5c
NUL 0x00
the character must be encoded as the backslash '\' character (ASCII
0x5c) followed by the two hexadecimal digits representing the ASCII
value of the encoded character. The case of the two hexadecimal
digits is not significant.
This simple escaping mechanism eliminates filter-parsing ambiguities
and allows any filter that can be represented in LDAP to be
represented as a NUL-terminated string. Other characters besides the
ones listed above may be escaped using this mechanism, for example,
non-printing characters.
For example, the filter checking whether the "cn" attribute contained
a value with the character "" anywhere in it would be represented as
"(cn=\2a*)".
Note that although both the substring and present productions in the
grammar above can produce the "attr=*" construct, this construct is
used only to denote a presence filter.