I try to copy files with rsync and i have checked multiple times that the address is correct but still i get feedback: no such directory. The code is:
rsync -azvrP -e ssh master_123#165.x.x.115:/applications/123/public_html/wp-content/uploads/2023/ /applications/321/public_html/wp-content/uploads/2023/
What could be the error?
The scp command to get a file from the Karaf directories via Karaf ssh console works well :
scp -P 8101 karaf#localhost:/deploy/README
(after I have entered the password)
But the reverse operation to upload a file fails with a "Permission denied" error :
scp README -v -P 8101 karaf#localhost:/deploy/
I tried to locally remove the file first, same error. I gave 777 on the "deploy" directory, and also tried with a new test directory.
Where can it come from ?
Thanks
Arnaud
Found it : the -P option cannot be anywhere in the line, it has to be before the local and remote filenames
I am trying to copy a file to remote server in a certain folder.
Its an adrive backup plan. But it comes with scp. I can copy the file if I don't select directory. Even if I put a directory that doesn't exist it says its a directory.
root#host1 [/usr/src]# scp ftpdelete.sh user#host#scp.adrive.com:/mysql-only/
scp: /mysql-only/: Is a directory
Amazingly enough in my case it was that the directory didn't exists!! :|
Is the error message a bug?... or it's me. Tempted for the latter.
SCP doesn't automatically create you new directory if you want to scp file (it creates directory only if you do recursive copy). There is wrong error message. The error should be No such file or directory or similar.
It is known problem and there is upstream bugzilla about this [1].
[1] https://bugzilla.mindrot.org/show_bug.cgi?id=1768
You are copying the sh file to a new directory on the server, and the directory is expected to be there but in fact not(then the machine thinks you want to change the file to be a directory). Most probably the directory you set is wrong.
-r' Recursively copy entire directories. Note that scp follows symbolic links encountered in the tree traversal.
But it doesn't create a directory but you can do below
ssh remote mkdir /diretcory
root#host1 [/usr/src]# scp -r ftpdelete.sh user#host#scp.adrive.com:/complete_path/mysql-only/
or
rsync can do the creating of directory if not exist
its basic command syntax is similar to scp:²
$ rsync -r -e ssh ftpdelete.sh me#my-system:/complete_path/mysql-only/
I saw a similar error, when tried scp to path that relative to home directory. The error fixed after removing unnecessary leading / in path:
# scp ftpdelete.sh user#host#scp.adrive.com:mysql-only/
rather then
# scp ftpdelete.sh user#host#scp.adrive.com:/mysql-only/
^
scp -r source_location user#servername:/target_location
Don't put "/" after the directory's name.
Try to download the file directly to your local root directory and then copy it from there :
root#host1 [/usr/src]# scp user#host:/root/Desktop/file.txt /root/home/
I want to be able to transfer a directory and all its files from my local machine to my remote one. I dont use SCP much so I am a bit confused.
I am connected to my remote machine via ssh and I typed in the command
scp name127.0.0.1:local/machine/path/to/directory filename
the local/machine/path/to/directory is the value i got from using pwd in the desired directory on my local host.
I am currently getting the error
No such file or directory
Looks like you are trying to copy to a local machine with that command.
An example scp looks more like the command below:
Copy the file "foobar.txt" from the local host to a remote host
$ scp foobar.txt your_username#remotehost.edu:/some/remote/directory
scp "the_file" your_username#the_remote_host:the/path/to/the/directory
to send a directory:
Copy the directory "foo" from the local host to a remote host's directory "bar"
$ scp -r foo your_username#remotehost.edu:/some/remote/directory/bar
scp -r "the_directory_to_copy" your_username#the_remote_host:the/path/to/the/directory/to/copy/to
and to copy from remote host to local:
Copy the file "foobar.txt" from a remote host to the local host
$ scp your_username#remotehost.edu:foobar.txt /your/local/directory
scp your_username#the_remote_host:the_file /your/local/directory
and to include port number:
Copy the file "foobar.txt" from a remote host with port 8080 to the local host
$ scp -P 8080 your_username#remotehost.edu:foobar.txt /your/local/directory
scp -P port_number your_username#the_remote_host:the_file /your/local/directory
From a windows machine to linux machine using putty
pscp -r <directory_to_copy> username#remotehost:/path/to/directory/on/remote/host
i had a kind of similar problem. i tried to copy from a server to my desktop and always got the same message for the local path. the problem was, i already was logged in to my server per ssh, so it was searching for the local path in the server path.
solution: i had to log out and run the command again and it worked
In my case I had to specify the Port Number using
scp -P 2222 username#hostip:/directory/ /localdirectory/
Your problem can be caused by different things. I will provide you three possible scenarios in Linux:
The File location
When you use scp name , you mean that your File name is in Home directory. When it is in Home but inside in another Folder, for example, my_folder, you should write:
scp /home/my-username/my_folder/name my-username#127.0.0.1:/Path....
You File Permission
You must know the File Permission your File has. If you have Read-only you should change it.
To change the Permission:
As Root ,sudo caja ( the default file manager for the MATE Desktop) or another file manager ,then with you Mouse , right-click to the File name , select Properties + Permissions
and change it on Group and Other to Read and write .
Or with chmod .
You Port Number
Maybe you remote machine or Server can only communicate with a Port Number, so you should write -P and the Port Number.
scp -P 22 /home/my-username/my_folder/name my-usernamee#127.0.0.1 /var/www/html
You also need to make sure what is in the .bashrc file of the user.
I've also got this ridiculous error because I put cd and ls commands in there, as it was mean to let them see the current files & directories when the user is has logged in from ssh.
The filename should go at the end of the path to the directory. That is, it should be the full path to the file. You are doing this from a command line, and you have a working directory for that command line (on your local machine), this is the directory that your file will be downloaded to. The final argument in your command is only what you want the name of the file to be. So, first, change directory to where you want the file to land. I'm doing this from git bash on a Windows machine, so it looks like this:
cd C:\Users\myUserName\Downloads
Now that I have my working directory where I want the file to go:
scp -i 'c:\Users\myUserName\.ssh\AWSkeyfile.pem' ec2-user#xx.xxx.xxx.xxx:/home/ec2-user/IwantThisFile.tar IgotThisFile.tar
Or, in your case:
cd /local/path/where/you/want/the/file/to/land
scp name#127.0.0.1:/local/machine/path/to/directory/filename filename
Be sure the folder from where you send the file does not contain space !
I was trying to send a file to a remote server from my windows machine from VS code terminal, and I got this error even if the file was here.
It's because the folder where the file was contained space in its name...
If you want to copy everything in a Folder + have a special Port use this one.
Works for me on Ubuntu 18.04 and a local machine with Mac OS X.
-r for recursive
-P for Port
scp -rP 1234 /Your_Directory/Source_Folder/ username#yourdomain.com:/target/folder
As #Astariul said, path to the file might cause this bug.
In addition, any parent directory which contains non-ASCII character, for example Chinese, will cause this.
In that case, you should rename you parent directory
This happened to me and I solved it.
This problem can be because the file you are trying to get is not existing (typo in the name of file or folder?) or because it is invisible to the user that you enter in scp.
The problem in my case was that the files that I wanted to get from remote machine were created by another user (root on my case), so, those files were invisible
To fix, I did:
ssh myuser#myserver
chown myuser:myuser myfile
exit
scp mysuer#myserver:/home/myuser/myfile /localfolder/myfile
For me on my mac,
I just have to run the command from my MAC terminal
scp -r root#ip_addres:/root/source /Users/path/Desktop/others/destination
I'm trying to launch a Hadoop cluster on Amazon ec2, using the instructions in "Hadoop in Action" (also here: http://wiki.apache.org/hadoop/AmazonEC2).
I've set up my private ssh key and configurations, but when I try to launch a cluster using the command-line tools:
hadoop-ec2 launch-cluster test-cluster 2
I repeatedly get this error:
Warning: Identity file ~/.ec2/id_rsa-gsg-keypair not accessible: No such file or directory.
Permission denied (publickey,gssapi-with-mic).
The ~/.ec2/id_rsa-gsg-keypair definitely exists, though, and I did chmod 600 it:
> chmod 600 ~/.ec2/id_rsa-gsg-keypair
> ls -l id_rsa-gsg-keypair
-rw------- 1 my-username
Any idea what's wrong?
You may have already realized this, but the problem is possibly related to the ~/ path usage. Try using the absolute path /home/username/.ec2