I am getting the apikey that generates the /api/login, but that apikey I don't see how to use it in the other endpoints since in the Docs it talks about making request with the OAuth2.
https://files.slack.com/files-pri/T11NA9FSN-F03CMAN5H6X/captura_desde_2022-04-22_15-38-11.png
In case you need to use
generated via "api/login" method API key in the scope of Sandbox you should:
generate API key via "api/login" method by passing login and password of customer user
sign in with the same user or just refresh Sandbox page, in case you already signed in
after authentication method will be changed to WSSE (in case if it is still session switch it manually)
after WSSE will be used for every call
In case you need to use WSSE authentication from code please see the next article (especially "Header Generation" part): https://doc.oroinc.com/api/authentication/wsse/
We are trying FusionAuth & looking to have a single step flow for Sign up + Sign In.
After user signs up, we want to show/land him directly to our application's dashboard page (without showing him login page in between the flow). The authentication should happen but internally i.e we are expecting OAuth2 standard IdToken in response to "WebApplication" so that web application can use IdToken to allow user to application.
Please note that we don't want to use approaches where we need to pass Username/password to our web application, don't want to handle user credentials. Also that we dont want to use Authentication Tokens returned in Registration flow because AuthenticationTokens are not that secure, looking to use OAuth2 based IdToken instead.
I have came across this post "https://fusionauth.io/community/forum/topic/165/taking-a-user-directly-to-the-registration-page/3" and tried following request, but it is showing Login page instead of registration.
/oauth2/register?client_id=<Configured_client_id>&redirect_uri=<Configured_redirect_uri>&response_type=code
(I have not used CSRF parameter though)
Please can you suggest why its showing Login Page?
You should be able to have a user register and be sent directly to your application, as long as you set the correct redirect_uri and put that on the registration URL:
https://local.fusionauth.io/oauth2/register?client_id=c50329fa-93e5-4618-8d9f-73d0ab069a23&response_type=code&redirect_uri=https%3A%2F%2Fapp.example.com%2F
The application will then receive a code that can be exchanged for an access token. You can call the userinfo endpoint with that token and get user information like email address, etc.
What you won't get that it seems like you might want is an id token. For that you'll have to send the user through the login process with a scope of profile. However, you could mind your own 'id token'-lite using the values from the userinfo endpoint and the JWT vending: https://fusionauth.io/docs/v1/tech/apis/jwt/#vend-a-jwt
How do I access SonarQube quality gate API in case of a private project? I tried sending the "User token" for a user as Authorization Bearer token and Basic login. However, it did not work. The only way I can access it is from a browser when a user is logged in, i.e. login token is present. Accessing like that from Postman is also possible. How could I get the token, then and is that a right way to access the API?
Tokens are indeed the right way to access the API.
1) You can obtain a new token by going to
Administration > Security > Users under tokens (click the list icon) then enter a name and click Generate
Make sure to copy the token as you won't be able to see it once you close.
2) Postman has an option to generate code based on a request (click the "code" option). If it works through Postman, it should work in your code with the copied request.
3) As a last resort if it doesn't work, here is a Groovy function I wrote to send a Get request.
// Returns response of SonarQube web API call with admin auth in text format
def getFromApi(String getURL){
def Res = ("curl -u "+AuthenticationToken+": "+getURL).execute().text
if (Res){
return Res
}
else{
return "error"
}
}
For post request you just need to add -X POST before the authentication token. Modify it to suit your needs.
Hope it helps!
Currently Google Assitant includes an easy way to request non-identifiable information about the user and a detailed flow to authenticate the user on a third party service through OAuth2. What about if all I need is have the user authenticate on Google itself? I tried filling in the account linking flow using Google OAuth2 information, but that seems not to work. If that last thing is supposed to work fluently than that would be enough of an answer.
Context: Users already authenticate only with Google on a related webpage. All I need is to link this already authenticated account with the less-authenticated account on Google Assistant.
Update, 25 Oct 2018:
As of 13 September 2018, there is now a much simpler way to access the user's account if your project uses Google Sign-In. Google Sign-In for Assistant will give you an ID Token with information about the user, including their Google ID, with their permission. This permission can be granted just using voice and is fairly streamlined.
You can combine this with a web- or app-based Google Sign-In to get their permission to access OAuth scopes if you need to access Google's APIs.
Update, 25 Oct 2017:
As of around 4 Oct or 7 Oct, Google has updated their policy (again) to restore language restricting OAuth endpoints that are valid. The terms now include
When implementing account linking using OAuth, you must own your OAuth endpoint
and it appears (from the comments below) that they now check for the Google endpoints to prevent this method from working.
At this point, the only thing you can do is setup your own OAuth2 server.
Original Post:
Broadly speaking, the auth tasks you need to do are in four parts:
Configure your project (in the cloud console) so that the Calendar API is enabled and that the OAuth2 client is correctly configured.
Configure the Action for account linking in the action console.
Configure the Actions on Google Integration for your API.AI Agent to indicate that sign-in is required.
When API.AI calls your webhook to fulfill an Intent, it will include an auth token as part of the JSON. You can use this token to make calls to the Google APIs you need.
Configure Cloud Project
You need to configure your cloud project so that it has access to the Google APIs you need and setup the OAuth2 Client ID, Secret, and Redirect URI.
Go to https://console.cloud.google.com/apis/dashboard and make sure you have the project you're working with selected. Then make sure you have the APIs you need enabled.
Select the "Credentials" menu on the left. You should see something like this:
Select "Create credentials" and then "OAuth client ID"
Select that this is for a "Web application" (it is... kinda...)
Enter a name. In the screen shot below, I used "Action client" so I remember that this is actually for Actions on Google.
In the "Authorized Redirect URIs" section, you need to include a URI of the form https://oauth-redirect.googleusercontent.com/r/your-project-id replacing the "your-project-id" part with... your project ID in the Cloud Console. At this point, the screen should look something like this:
Click the "Create" button and you'll get a screen with your Client ID and Secret. You can get a copy of these now, but you can also get them later.
Click on "Ok" and you'll be taken back to the "Credentials" screen with the new Client ID added. You can click the pencil icon if you ever need to get the ID and Secret again (or reset the secret if it has been compromised).
Configure the Action Console
Once we have OAuth setup for the project, we need to tell Actions that this is what we'll be using to authenticate and authorize the user.
Go to https://console.actions.google.com/ and select the project you'll be working with.
In the Overview, make your way through any configuration necessary until you can get to Step 4, "Account Linking". This may require you to set names and icons - you can go back later if needed to correct these.
Select the Grant Type of "Authorization Code" and click Next.
In the Client Information section, enter the Client ID and Client Secret from when you created the credentials in the Cloud Console. (If you forget, go to the Cloud Console API Credentials section and click on the pencil.)
For the Authorization URL, enter https://accounts.google.com/o/oauth2/v2/auth
For the Token URL, enter https://www.googleapis.com/oauth2/v4/token
Click Next
You now configure your client for the scopes that you're requesting. Unlike most other places you enter scopes - you need to have one per line. Then click Next.
You need to enter testing instructions. Before you submit your Action, these instructions should contain a test account and password that the review team can use to evaluate it. But you can just put something there while you're testing and then hit the Save button.
Configure API.AI
Over in API.AI, you need to indicate that the user needs to sign-in to use the Action.
Go to https://console.api.ai/ and select the project you're working with.
Select "Integrations" and then "Actions on Google". Turn it on if you haven't already.
Click the "Sign in required for welcome intent" checkbox.
Handle things in your webhook
After all that setup, handling things in your webhook is fairly straightforward! You can get an OAuth Access Token in one of two ways:
If you're using the JavaScript library, calling app.getUser().authToken
If you're looking at the JSON body, it is in originalRequest.data.user.accessToken
You'll use this Access Token to make calls against Google's API endpoints using methods defined elsewhere.
You don't need a Refresh Token - the Assistant should hand you a valid Access Token unless the user has revoked access.
After contacting Google the current situation seems to be that you should set up your own OAuth2 server, and then on the login screen of your OAuth2 server you should start the Google OAuth2 flow.
you have to have your own endpoint with Google Oauth2 - it is correct that you can't use Google Oauth itself as a provider. To use the Google OAuth service, you can use a "sign in with Google" button in your own endpoint instead.
Source: Contacting Google Actions on Google Support
Kind of speechless right now... as this seems to be a huge oversight on Google's part.
I am able to make it work after a long time.
We have to enable the webhook first and we can see how to enable the webhook in the dialog flow fulfillment docs
If we are going to use Google Assistant, then we have to enable the Google Assistant Integration in the integrations first.
Then follow the steps mentioned below for the Account Linking in actions on google:-
Go to google cloud console -> APIsand Services -> Credentials -> OAuth 2.0 client IDs -> Web client -> Note the client ID, client secret from there
-> Download JSON - from json note down the project id, auth_uri, token_uri
-> Authorised Redirect URIs -> White list our app's URL -> in this URL fixed part is https://oauth-redirect.googleusercontent.com/r/ and append the project id in the URL
-> Save the changes
Actions on Google -> Account linking setup
1. Grant type = Authorisation code
2. Client info
1. Fill up client id,client secrtet, auth_uri, token_uri
2. Enter the auth uri as https://www.googleapis.com/auth and token_uri as https://www.googleapis.com/token
3. Save and run
4. It will show an error while running on the google assistant, but dont worry
5. Come back to the account linking section in the assistant settings and enter auth_uri as https://accounts.google.com/o/oauth2/auth
and token_uri as https://accounts.google.com/o/oauth2/token
6. Put the scopes as https://www.googleapis.com/auth/userinfo.profile and https://www.googleapis.com/auth/userinfo.email
and weare good to go.
7. Save the changes.
In the hosting server logs, we can see the access token value and through access token, we can get the details regarding the email address.
Append the access token to this link "https://www.googleapis.com/oauth2/v1/userinfo?access_token=" and we can get the required details in the resulting json page.
accessToken = req.get("originalRequest").get("data").get("user").get("accessToken")
r = requests.get(link)
print("Email Id= " + r.json()["email"])
print("Name= " + r.json()["name"])
You need to implement the Oauth protocol with whatever Google Assistant app you are developing. Let me be a bit more clear:
The user is on the assistant, you need to link him to any data
you have on your App side
The access to the data you have about
your user is protected by an access token
Google then needs to
ask you for this token to have access to this resource
When
google has the token it can send it to the app so it validates every
requests to get the resource.
This is why you need to implement your own oauth server (Honestly it is just two more endpoints in your application): the identity is checked on google's side, but the link between the user and the resource to access can only be known by you.
The process above is valid, you just need to specify your own token endpoint and your own auth endpoint.
Note that if you only want to check that the user is logged in into google and get his email, you just need to implement the streamlined identity flow that does not require the /auth endpoint (Automatically Sign Up Users with Streamlined Identity Flows)
That beeing said I implemented the flow but get the same error :
expected_inputs[0].possible_intents[0]: Transactions/Identity API must be enabled before using.
We are using rdio to get music from rdio in our app. We have used OAuth2.0 for authentication. Currently we are using authorization code. I am exploring to switch to Resource owner credentials documented in (http://www.rdio.com/developers/docs/web-service/oauth2/auth-password/ref-oauth2-auth-password ). I have created the app in rdio site, obtained the client_id and client_secret. I am making POST call to https://services.rdio.com/oauth2/token and passing username= password= (HTTP Authorization header method of client verification) . The response comes as "error_code":"unauthorized_client" "error_description": "This client is not authorized to use the password grant". I have tried to substitute username and password with real username and password, but that doesn't work. Is it the validity of client_id and client_secret that is the issue? I've followed all the steps to T. Please let me know what am i doing wrong?
Regards Vinay
This OAuth 2.0 grant isn't available to every one, the documentation says:
This method is limited to trusted Rdio partners. Please contact us if you feel your application needs to use this method.