I created a custom behavior for BizTalk in order to connect to an API with Oauth authentication.
I did these steps :
I added it to the GAC
Added the lines in machine.config (both)
restarted IIS, Biztalk admin console
I can even see it with SvcConfigEditor.
However when I create a WCF-Custom and try to add the Behavior, it is actually nowhere in the pick list.
Any idea please?
So....yes, it does work, but WCF being...well...WCF...
You do have to restart the machine. I don't recall ever getting this to work without doing so.
Then just keep checking the registration against other examples. Eventually, you'll get it.
Import your behaviour extension in Adapter Handler level.
In your biztalk administration console, go to Adapters -> Select the adapter and click the Handler Properties and import your extension.
Hope this helps.
Related
We have a solution with a web role (WCF service role) and a WebSiteRole for a website we are building,
we are trying to connect the WebSiteRole to the WCFServiceRole with no success.
The Web reference comes out empty everytime while the service seems to be functioning properly.
We even tried making a new solution with an empty "DoWork" service to try to attach it , it comes out empty as well.
I used the svcutil to generate the proxy manually and add it to the project and that worked, but that's not the right way to connect to a service...
what am i doing wrong?
Update :
opened a new bug, hope they'll fix it
https://connect.microsoft.com/VisualStudio/feedback/details/790187/vs2012-add-service-reference-discover-services-in-solution-feature-creates-empty-proxy
https://connect.microsoft.com/VisualStudio/feedback/details/790187/vs2012-add-service-reference-discover-services-in-solution-feature-creates-empty-proxy
The types in the WCFRole and WebsiteRole are colliding.
Right click and the Service Reference -> Configure service reference -> Uncheck the "Reuse reference Types"
working like a charm now :)
We have successfully setup our first interface on our development environment. when we try to put this live, we get an error stating that "Protocol type "WCF-Custom" not found.". At first we tought this was due to the adapter not being installed on the live but we assured ourselves that this is the case. the only diffrence between the two enviroments now is the fact that we deployed to the test one and are importing the exported msi on the live. Is there a way to also import this protocol?
This is most often caused by not having the WCF Adapter installed. It may be worthwhile to go and and uninstall and reinstall it.
Note also that you have to both import the MSI file into BizTalk and run the MSI file on the live server.
Lastly, verify in the BizTalk Server Administration Console that the WCF-Custom adapter is assigned to a valid BizTalk host, which has a host instance assigned to it. The adapter needs to have a handler for both send and receive.
Make sure the adapter is visible under Platform Settings - Adapter. If it is not there, add it.(After running all the MSI's to install the adapters.) This is what I had to do to get rid of this error. (Except mine said it could not find WCF-SQL in stead of WCF-Custom.)
I have made a small log service that i want to publish to a subdomain on my webhotel. I make the wcf service and test it locally - no problem. I then go to the [Build] menu and choose [Publish], type in my FTP location and publishes it to the location. No problems.
The problem arise when i need to use it, i try to navigate to the .svc file but gets this error:
This collection already contains an address with scheme http. There can be at most one address per scheme in this collection.
Parameter name: item
What am I doing wrong?
That's because of your IIS configuration. This has already been discussed here: WCF service startup error "This collection already contains an address with scheme http"
Solved! The problem is that i cannot access the IIS configuration, since its on a hosted environment. The solution is described on my blog, since i had so much trouble getting this to work.
http://www.vikingworks.dk/post/WCF-Service-on-hosted-environment.aspx
I'm using Visual Studio 2008 and have a WCF client working against a WCF service. They are both located in the same Visual Studio solution. After I've made a change in my WCF contract, I want to update the service reference on the client so that changes made to the contract is also made in the proxy.
My problem is that the proxy code is not re-generated.
When I select to update the service reference, the following happens:
A dialog with the title "Updating service reference 'name-of-reference'" is shown. This dialog has a progress bar.
The progressbar moves and the status text in the dialog is changed to "Updating configuration"
The progressbar moves a bit more, and the status text is chnaged to "Configuration update complete"
The dialog doesn't show the text "Generating \something\" (can't remember the exact wording) which I would expedct.
If I delete the service reference and add it again, the proxy is properly generated. I add the service using the exact same settings as before, so I don't think it's a issue I can solve by changing the service reference configuration on the client.
One thing I suspect may be the problem is that I've renamed the default wsHttpBindings in app.config. I've also renamed the default endpoints. The reason behind this is that I need more than one endpoint and having one named 'some-default-name' and one with my own name is just confusing.
The problem with deleting the service and adding it again is that Visual Studio adds a new binding in app.config (among other things) which should not be there.
Anyone seen this problem before? Anyone knows of a solution to it?
When we have had this problem it has usually been one of these errors:
The size of the contract has increased, and is now so large that the WCF configuration does not allow it to be transferred.
A new class has been added to a WCF Interface and that class is not marked as serializable.
There is a compile error that stops the code from building and it therefore uses the old dll
I've run into this problem with the following conditions:
Our workstations are connected to an Active Directory domain (nearly everything uses Windows Authentication)
The service reference I'm trying to update is hosted on localhost, and is running under IIS Express (so the Application Pool user is running as the developer's personal domain user account)
Another developer has added or updated the reference to the project more recently than me.
The only way I have figured out how to workaround this issue is to edit the configuration.svcinfo file for that service reference (you will need to show all files for the project to see it in visual studio), locate the following section:
userPrincipalName value="user#domain.com"
and change the user to my own domain user. After saving the file, I have no trouble updating the reference until another developer updates the service reference (likely using the same workaround). Unfortunately, I haven't been able to figure out a permanent solution to this issue.
My error was that I forgot to add the OperationContract attribute.
In my case the problem was that the previous developer had added the service reference using his machine name rather than localhost. So when I told Visual Studio to update, it connected to his machine, which did not have the changes. I modified the service reference files and replaced his machine name with localhost and it was able to update the reference.
I had this problem too. Deleted the service reference and recreated it again.
My problem was that I had two methods with the same name. Everything builded fine, but I couldn't update service reference. When I tried to start just the WCF service, the error pops up.
Two easy steps to solve that:
Run Service, then stop it.
Update service reference.
Highlight the service as the active project, F5 to run it in VisualStudio, it will start up in the service test app. Stop debugging. Then try to update your service reference - worked for me.
I know this solution is a bit late, but after trying the posted solutions with no success, this worked:
When you create a WebService, it generates a .dll file that you reference as your service reference. This .dll is (as most know) not recreated everytime you make changes to the .SVC file. You can see this if you go and view the date modified property of the web service .dll file, in my case it was three hours old!
My solution was to make appropriate changes to the service contact, save it, and re-build the project which will cause it to recreate all the .dll's reflecting the changes you made to the service contact file (.svc).
After this, update the service reference on the client app, and the changes are evident.
Spades
I had the same problem. Modified some of the data contracts. Tried to "Update Service Reference" and did not see the change. Dropped and re-added the service. Still didn't see the change when writing code in the client. Opened my client with Reflector and saw the service types had the change! So why was intellisense still showing old properties? Restarted Visual Studio and the modifications finally showed in intellisense.
I had the same problem, this by me it was caused by GIT Merge Conflict, i was missing the following code from my csproj file
<ItemGroup>
<None Include="Service References\<SERVICE NAME>\Reference.svcmap">
<Generator>WCF Proxy Generator</Generator>
<LastGenOutput>Reference.cs</LastGenOutput>
</None>
</ItemGroup>
I have added this onder the line of Reference.svcmap
Another solution to these kinds of problems is if your namespaces get jumbled in referenced projects that both consume the service. So:
ProjectA - Consumes ServiceA
ProjectB - Consumes ServiceA, Has Reference to ProjectA
If you change ServiceA and update ProjectB, sometimes the namespaces can can change to look at ProjectA's version of the service.
I have a silverlight project that calls into a wcf service. Everything works fine on my local machine.
However when I deploy to a virtual machine, with the exact same query the wcf service returns, but the result is empty.
I've tried debugging, but have not been able to get it to break in the wcf service.
Any ideas what the problem could be, or how I could go about debugging it?
Thanks
I figured out what the problem is, but am not sure what the solution is.
In my silverlight project the wcf service I am referencing is http://localhost/.../SilverlightApiService.svc
I used fiddler on my vm to see the request that was made and instead of trying to contact the above service, it was trying to contact:
http:///.../SilverlightApiService.svc
So, for some reason my machine name is getting inserted in there instead of localhost. Any thoughts on this would be appreciated.
I had this exact problem when deploying to amazon ec2 - The machine name for the service was being returned in the wsdl rather than the dns.
There were a couple solutions (one involved creating static wsdl - yuck!)
But the other was creating a sort of factory pattern for the service
This thread (you can read it all, but the answers are at the bottom.)
http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/c7fd51a2-773e-41d4-95a0-244e925597fe/
The slight downfall with this is that although it works - if you change the location of the server, you will need to remember to update your config - Which although isn't hard, it's easy to forget to do.
Can you give us a bit more information? What kind of binding are you using? What does the service config and the client config look like? Where do you get your data from that gets returned? Could it be the service on the VM just doesn't get any data? (e.g. queries a database that just doesn't have the data requested?)
Marc
I have had that happen before. I would try this. Set you start page as the web service file and run the app. Then set the start page back to your default page. Then update all the server references in your SL project. Recompile everything and republish. This has helped me a bunch of times in the past.
I figured it out.
Basically my machine name was hard coded in my ServiceReferences.ClientConfig file in my silverlight project.
What I had to do was specify programmatically what url to use for the service reference when instantiating my service client:
System.ServiceModel.EndpointAddress address = new System.ServiceModel.EndpointAddress(new Uri
(Application.Current.Host.Source, "../WebServices/SilverlightService.svc"));
ServiceClient serviceClient = new ServiceClient("BasicHttpBinding_IService", address);
I figured out what the problem is, but am not sure what the solution is.
In my silverlight project the wcf service I am referencing is http://localhost/.../SilverlightService.svc
I used fiddler on my vm to see the request that was made and instead of trying to contact the above service, it was trying to contact:
http:///.../SilverlightService.svc
So, for some reason my machine name is getting inserted in there instead of localhost. Any thoughts on this would be appreciated.