I have a silverlight project that calls into a wcf service. Everything works fine on my local machine.
However when I deploy to a virtual machine, with the exact same query the wcf service returns, but the result is empty.
I've tried debugging, but have not been able to get it to break in the wcf service.
Any ideas what the problem could be, or how I could go about debugging it?
Thanks
I figured out what the problem is, but am not sure what the solution is.
In my silverlight project the wcf service I am referencing is http://localhost/.../SilverlightApiService.svc
I used fiddler on my vm to see the request that was made and instead of trying to contact the above service, it was trying to contact:
http:///.../SilverlightApiService.svc
So, for some reason my machine name is getting inserted in there instead of localhost. Any thoughts on this would be appreciated.
I had this exact problem when deploying to amazon ec2 - The machine name for the service was being returned in the wsdl rather than the dns.
There were a couple solutions (one involved creating static wsdl - yuck!)
But the other was creating a sort of factory pattern for the service
This thread (you can read it all, but the answers are at the bottom.)
http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/c7fd51a2-773e-41d4-95a0-244e925597fe/
The slight downfall with this is that although it works - if you change the location of the server, you will need to remember to update your config - Which although isn't hard, it's easy to forget to do.
Can you give us a bit more information? What kind of binding are you using? What does the service config and the client config look like? Where do you get your data from that gets returned? Could it be the service on the VM just doesn't get any data? (e.g. queries a database that just doesn't have the data requested?)
Marc
I have had that happen before. I would try this. Set you start page as the web service file and run the app. Then set the start page back to your default page. Then update all the server references in your SL project. Recompile everything and republish. This has helped me a bunch of times in the past.
I figured it out.
Basically my machine name was hard coded in my ServiceReferences.ClientConfig file in my silverlight project.
What I had to do was specify programmatically what url to use for the service reference when instantiating my service client:
System.ServiceModel.EndpointAddress address = new System.ServiceModel.EndpointAddress(new Uri
(Application.Current.Host.Source, "../WebServices/SilverlightService.svc"));
ServiceClient serviceClient = new ServiceClient("BasicHttpBinding_IService", address);
I figured out what the problem is, but am not sure what the solution is.
In my silverlight project the wcf service I am referencing is http://localhost/.../SilverlightService.svc
I used fiddler on my vm to see the request that was made and instead of trying to contact the above service, it was trying to contact:
http:///.../SilverlightService.svc
So, for some reason my machine name is getting inserted in there instead of localhost. Any thoughts on this would be appreciated.
Related
I have created a WCF service using Workflow. It works just fine. I created another Workflow application to consume it. I added the service reference to the application project and rebuilt the project. I added the component from the service to the app, but it's expecting an argument that I never specified.
I've tried rebuilding both the service and the app, generating an entirely new solution and starting from scratch - same problem. I've looked at others' code and they've structured this project the same as mine but this issue does not show up on theirs. Googling this problem seems to bring up not results.
My workflow service is defined as such: https://i.imgur.com/E8mEfs6.png
The parameters of the receive component are: https://i.imgur.com/TaNRw2y.png
But when I add it to my app, the parameters are defined as: https://i.imgur.com/tqgEwNr.png
Which is not what I had defined in my service. I can't even figure out what it wants me to pass in for _GetCityStateFromZip. It says the type is InArgument.
I was expecting it to be expecting the zipcode parameter as I specified in the service. I think I might be adding the service reference incorrectly, but I don't know how. I went to Add Service Reference in Visual Studio, then copy/pasted the path to the .xamlx file of the service on localhost.
Thank you.
I found a solution to this problem here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/5279fc5f-8a53-43e7-8ef2-3073808dc90f/configuring-workflow-services-how-to-configure-workflow-control-endpoint?forum=wfprerelease
I re-made my service using the steps listed and it works as originally intended.
I'm about a month away developing my silverlight application (this is my first). Everything went rather smoothly until today, when out of the blue I started getting this message:
An error occurred while trying to make a request to URI 'http://localhost:2682/Services/Authentication/LoginService.svc'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details.
I'm using WCF Services and this issue never appeared until now.
I've added a clientdomain.xml and clientaccesspolicy.xml file to my [projectname].web folder, and re-wrote them about a 1000 different ways.
I've also used Fiddler and it shows me that the error is on both those files, the error is
[Fiddler] The socket connection to localhost failed. ErrorCode: 10061. No connection could be made because the target machine actively refused it 127.0.0.1:2682
I've searched the error "10061" and it has to do with socket definition. But I couldn't find any solution to that.
Don't know if it has anything to do with it, but my "ASP.net Development Server" port is 6939.
Keep in mind that the app has NOT been deployed, so this is only happening locally. I'm using MS VS 2010 and MS SQL Server 2008.
Am I doing anything wrong or is this a silverlight issue??
On a last note, I haven't changed anything on Port, socket or service configuration. Last thing I was doing was editing a XAML file on client side and and the app started throwing me this error.
Need help, can't do anything until this is solved!!!!
Thanks.
i think you are using you app on localhost and a dynamic port is getting assigned and this port is not fixed and every run and that causes the refuse problem. if you want to fix this, create a solid url for example,
http://localhost/apps/Services/Authentication/LoginService.svc
Well, last night, just before I went to bed, I noticed something odd. In my "ServiceReferences.ClientConfig" file, the endpoint ports for each one of my services where diferent from the ones the silverlight machine used, so going on a hunch (and because I was reaching my sanity breakpoint) I decided to eliminate all my Service References and re-add them again.
I worked... go figure. Still don't know why this happened and if anyone could shed some light on the subject, I would appreciate it. It's kinda of annoying having to re-add all my services references. Right now I have only 6 of them, but in the near future they may go over 20, and if this happens again... well, it's going to be a real pain...
Thanks
to make long story as short as possible, I made a duplex WCF service, using wsdualhttpbinding, tested it on my local machine using Visual Stuido and using IIS7, thigs are working fine (i had to use windows authentication on IIS7 to make it work thu). Any way, I published the duplex service on my company network (LAN network, windows domain, IIS 6) which i used to for many WCF services (basic and ws http bindings and worked fine) and the problem is I can not get the service to work, I tried all possible configurations to the app.config and to the web.config files, still i can not make it work.. The problem is when the client start calling the duplex service It hangs and no error message or whatsoever, and after few minutes it gives me a timeout error.. there is no error at server side ( i have checked the even viewer). There is not error about port 80 or access privileges. Is there anything i am missing? anything i should take care of and i forgot? i have been awake for 20 hours trying to find a solution because i have a time line to follow or my boss will Dispose() Me..
i have tried the following:
1- I set the IsOneWay = true..
2- I run the program as admin.
3- I i set the base address to another port.. same result..
4- I used windows auth, none... same result..
5- i have tried another machine to test the client.. same result.. it hangs with no reponse.
6- I also tried running the client on windows vista, 7 and xp... same result..
7- I have played with all kind of configurations in config files and i made sure its the same on both files (app.config and web.config)..
8- I have added a static constructor in the service side to see if the service was ever reached by the client, i added few lines to add a value in the db.. and nothing was written to db.. so it was never reached..
9- Yes, when i access the service SVC page i see the page and it worked fine.. I could access the metadata as well..
10- restarting the server, restarting IIS server, Recycling AppPool...etc..
I tried all of that and many other solutions and tricks.. same result when the app is on IIS.. the strange thing is, there is no error at server side.. and i only get TimeOut error (if i get it).. While If i tried the service on the IIS installed locally it works fine.. change the config file to point to the company IIS server,,, no luck!
Is there anything i am missing??? could be something simple but i just missed it..
I´m creating a new WCF service. I initially had only three operations. But after some time I decided to add two more. This operations doesn't appear in the Microsoft test client, neither in the list of operations when I try to add a service reference from my WPF client. Also I tried to comment one of the initial operations. It still apears in the Microsoft test client and can be invoked. I Tried also delete the dlls generated by the service and regenerate again. No luck. There are some kind of "cache" where Visual Studio stores the WCF services libraries that I can delete?
UPDATE: I'm working with the service running in the ASP.NET devolopment server.
You need to understand the order in which things happen.
You change your code, adding methods with [OperationContract] on them, or removing them, or changing their parameters or return values.
You then must build your service, producing a .DLL that contains the changes.
You must then deploy the changed DLL to the server it's going to run on
You must then restart the service (this may happen automatically depending on the server. For instance, IIS will recycle the service when it sees that the DLL changed)
You must then update your client, either the WCF Test Client, or "Add Service Reference", or the equivalent.
This last will have the effect of sending a request to the service for the new metadata or WSDL. Only then can the client see the changes you made to the definition of the service.
I don't know why, but I created a new project and copied the definitions of the operations from the problematic project and the problem is gone. One case more for Microsoft mysteries.
Make sure you are updating the services after adding the new operations.
Also make sure they have the attribute [OperationContract].
One thing we have discovered is that when you deploy the dlls that they must be in the bin, and cannot reside in the debug or release folder.
For me worked: just rebuild the wcf project
Did you close the client connection in client side
as showing your service
class Test
{
static void Main()
{
LocationClient client = new LocationClient();
// Use the 'client' variable to call operations on the service.
// Always close the client.
client.Close();
}
}
SOLUTION HERE :
Make sure your dataContract does NOT contain any enum
(You can use integer instead)
Be sure to reference a project in the solution and not a dll on your disk
Remove your "bin" and "obj" folders
Recompile
In IIS recycle the application pool
In IIS restart your service
In IIS "Browse" your service
=> You got it
I have created a WCF service using vb.net. Everything works fine on my development machine but when I deployed it it failed with the following error
'There was an error while trying to deserialize parameter http://tempuri.org/:querys'
I call a single method on the service and it has a single parameter called 'querys'. This parameter was a list(Of CustomType).
I then created a new method with a single parameter of type ArrayList. Thinking that this should serialize. Again it works fine on my development machine but fails when I deploy it with the same error a above.
I am completely stumped how it can serialize a parameter on one machine and not on another. I've tried it on 2 other machine and it doesn't work on either of them. So that rules out a problem with the machine itself.
All machines are running Win XP and .Net v3.5. The service was developed using VB .net in Visual Studio 2008.
Has anyone else experienced this?
I have not included any code because the error is happening System.ServiceModel and as I mentioned above the code does work on the development machine.
Please let me know if you need any more information.
Thanks in advance
Did you mark your 'CustomType' and its fields/properties you want to serialize with attribute DataContract, DataMember?
When you add the service reference to your client app which setting do you use? (Reuse types in referenced assemblies, always generate message contracts...)
If you host the WCF service on a IIS, then you should remember to run this command on the servers.
C:\WINDOWS\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe /i /x
Thanks to everyone who replied,
I have resolved the problem but unfortunately do not how. I tried many code changes but as far as I can tell I have reset the code back to the way it was. It is working now and I can not spend any more time on the issue to find out what caused it.
Just one of those things I guess.