I was trying to install NTL library on ubuntu, and after using "make", I get this error :
GMP version check (6.0.0/6.1.0)
*** version number mismatch: inconsistency between gmp.h and libgmp
Aborted (core dumped)
makefile:346: recipe for target 'setup3' failed
make[1]: *** [setup3] Error 134
make[1]: Leaving directory '/mnt/c/Users/pc-admin/ntl-11.0.0/ntl-11.0.0/src'
makefile:310: recipe for target 'setup-phase' failed
make: *** [setup-phase] Error 2
I saw the posts
https://gmplib.org/list-archives/gmp-discuss/2009-March/003663.html
http://www.mpfr.org/faq.html#undef_ref1
But still that didnt quite help.
Currently my usr/local/lib has
XXX#SECURE2:/usr/local/lib$ ls
libgmp.a libgmp.so libgmp.so.23.0.3 libmpfr.la libmpfr.so.6 libmpir.a libmpir.so libmpir.so.23.0.3 python3.5
libgmp.la libgmp.so.23 libmpfr.a libmpfr.so libmpfr.so.6.0.1 libmpir.la libmpir.so.23 pkgconfig
and /usr/local/include has
XXX#SECURE2:/usr/local/include$ ls
gmp.h mpf2mpfr.h mpfr.h mpir.h
Tried changing environment paths as
C_INCLUDE_PATH=usr/local/include
LIBRARY_PATH=usr/local/lib
LD_LIBRARY_PATH=usr/local/lib
Somehow I don't understand how to solve. Any help would be highly appreciated! Thanks for your patience
I encountered this problem today when I installed GMP after NTL Makefile lets me do so.
The following command seems to help:
sudo ldconfig
I met the same problem.It was because of the library's version.
First I installed gmp-6.1.2(using configure,make,make install command),and then I downloaded ntl-11.3.2,input configure and make commands.And the problem appeared:
GMP version check (6.1.2/6.1.0)
*** version number mismatch: inconsistency between gmp.h and libgmp
Aborted (core dumped)
makefile:353: recipe for target 'setup3' failed
I guessed maybe I need to install gmp 6.1.0.So I first entered gmp-6.1.2 directory,using command sudo make uninstall,then downloaded gmp-6.1.0 and the problem was solved.
Maybe you can have a try uninstalling gmp 6.0.0,installing 6.1.0.
I figured out a solution, start again and let the Wizard figure it out.
First, get rid of everything we did before
make clobber
./configure
Then edit the makefile and enable the wizard (around line 128)
#WIZARD=off
WIZARD=on
Related
I am installing linux kernel 5.8.10 in my existing Ubuntu system.
After going all the steps. When I started to install modules by command sudo make modules_install , I found 2 errors.
I can't find any way to solve it. Please help if anyone familiar with this kind of errors.
Errors:
cp: cannot stat 'net/atm/atm.ko' : No such file or directory
make[1]: ***[scripts/Makefile.modinst:33: net/atm/atm.ko] Error 1
make: *** [Makefile:1387: _modinst_] Error 2
on mac OSX 10.9.5 (Mavericks)
$brew install cmake
gives
==> Using the sandbox
==> Downloading https://cmake.org/files/v3.8/cmake-3.8.0.tar.gz
Already downloaded: /Users/me/Library/Caches/Homebrew/cmake-3.8.0.tar.gz
==> ./bootstrap --prefix=/usr/local/Cellar/cmake/3.8.0 --no-system-libs --parallel=8 --datadir=/share/cmake --docdir=/sh
==> make
Last 15 lines from /Users/me/Library/Logs/Homebrew/cmake/02.make:
[100%] Linking CXX executable ../bin/ctest
[100%] Built target ctest
Scanning dependencies of target documentation
[100%] sphinx-build man: see Utilities/Sphinx/build-man.log
Exception occurred:
File "/usr/local/Cellar/sphinx-doc/1.5.5/libexec/lib/python2.7/site-packages/sphinx/util/requests.py", line 52, in <module>
requests.packages.urllib3.exceptions.InsecurePlatformWarning)
AttributeError: 'module' object has no attribute 'InsecurePlatformWarning'
The full traceback has been saved in /tmp/sphinx-err-FKTGTI.log, if you want to report the issue to the developers.
Please also report this if it was a user error, so that a better error message can be provided next time.
A bug report can be filed in the tracker at <https://github.com/sphinx-doc/sphinx/issues>. Thanks!
make[2]: *** [Utilities/Sphinx/doc_format_man] Error 1
make[1]: *** [Utilities/Sphinx/CMakeFiles/documentation.dir/all] Error 2
make: *** [all] Error 2
Do not report this issue to Homebrew/brew or Homebrew/core!
These open issues may also help:
glew 2.0.0: add "--with-cmake" option https://github.com/Homebrew/homebrew-core/pull/12722
qt5: cmake find_package(Qt5Core) doesn't work when linked to /usr/local https://github.com/Homebrew/homebrew-core/issues/8392
Error: You are using macOS 10.9.
We (and Apple) do not provide support for this old version.
You may encounter build failures or other breakages.
Please create pull-requests instead of filing issues.
Error: You are using macOS 10.9.
We (and Apple) do not provide support for this old version.
You may encounter build failures or other breakages.
Please create pull-requests instead of filing issues.
why am i getting this error?
A search for this on SO led me to this page which says 'This happens on Python 2 platforms that have an outdated ssl module. '
I am using Python 2.7.13. I followed this page and issued:
pip install urllib3[secure]
but I still get the same error.
turns out make 3.8 is not compatible w mavericks. i upgraded to el capitan and it installed without a hiccough.
currenty I'm trying to install Riak on the Raspberry Pi 3 for testing purposes. I used the following instruction from basho:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
I'm having problems compiling it from source. I tried to compile it on Raspbian Jessie and then switched to Ubuntu Server 16.04. Both times with the same result. It is not compiling and aborts at a certain point. I don't know what causes the problem since it only says: recipe for target 'util/perf_count.o' failed. Searching Google and the mailing list from basho weren't successful.
The version of gcc is gcc (Raspbian 4.9.2-10) 4.9.2. The version of Erlang is Erlang R16B02_basho8 (erts-5.10.3)
The commands i used are the following:
Installing Erlang:
wget http://s3.amazonaws.com/downloads.basho.com/erlang/otp_src_R16B02basho10.tar.gz
tar zxvf otp_src_R16B02-basho10.tar.gz
cd OTP_R16B02_basho10
./otp_build autoconf
./configure && make && sudo make install
Installing Riak:
wget http://s3.amazonaws.com/downloads.basho.com/riak/2.2/2.2.1/riak-2.2.1.tar.gz
tar zxvf riak-2.2.1.tar.gz
cd riak-2.2.1
make locked-deps
make rel
Any suggestions are welcome.
Output:
`./include/leveldb/atomics.h:155:15: note:
template argument deduction/substitution failed util/perf_count.cc:439:40:
note: deduced conflicting types for parameter ‘ValueT’
(‘unsigned int’ and‘int’ add_and_fetch(ptr_32, 1);`
`Makefile:190: recipe for target 'util/perf_count.o' failed
make[1]: *** [util/perf_count.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/home/pi/Riak/riak/deps/eleveldb/c_src/leveldb'
ERROR: Command [compile] failed!
Makefile:23: recipe for target 'compile' failed
make: *** [compile] Error 1`
After digging deeper I got some help from Basho's mailing list (many thanks).
The Link below shows the steps to solve this problem:
http://lists.basho.com/pipermail/riak-users_lists.basho.com/2017-April/019187.html
The next link is a detailed instruction, which helps to install Riak on the Raspberry Pi 3:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
I am trying to build hsdis.dll in my laptop 32-bit Windows. I read http://dropzone.nfshost.com/hsdis.htm instructions and got to know that I will have to follow those steps. I saw that I have to use the mingw64-i686-gcc-core. I followed the steps, but have always found this error.
make[2]: i686-w64-mingw32: Command not found
Makefile:246: recipe for target 'libiberty.a' failed
make[2]: *** [libiberty.a] Error 127
make[2]: Leaving directory '/home/User/hsdis/build/Linux-i586/libiberty'
Makefile:8045: recipe for target 'all-libiberty' failed
make[1]: *** [all-libiberty] Error 2
make[1]: Leaving directory '/home/User/hsdis/build/Linux-i586'
Makefile:192: recipe for target 'build/Linux-i586/bfd/libbfd.a' failed
make: *** [build/Linux-i586/bfd/libbfd.a] Error 2
I would also like to know how to use the directive PrintAssembly, because i wanted to see the assembly code, of a Java class.
I have already saw other posts here, but none of them helped.
Thanks in advance
Here are the steps which help me to build it (x64 version, x86 should be almost the same):
download and unpack the latest hsdis sources as described in the building manual from the http://hg.openjdk.java.net/jdk8u/jdk8u/hotspot/tags;
download the latest bintuils-2.26.tar.gz package from the http://mirror.tochlab.net/pub/gnu/binutils/;
copy it to your Cygwin home directory and unpack it from the Cygwin terminal (this is very important, otherwise you may get permission problems):
tar -xzvf ./binutils-2.26.tar.gz
install the following Cygwin packages: mingw64-x86_64-gcc-core for x64 or mingw64-i686-gcc-core for x86, diffutils and make;
go to hsdis directory;
for x64 library build with the command: make OS=Linux MINGW=x86_64-w64-mingw32 'AR=x86_64-w64-mingw32-ar' BINUTILS=~/binutils-2.26 CONFIGURE_ARGS="--host=x86_64-w64-mingw32", for x86 library build with the command: make OS=Linux MINGW=i686-w64-mingw32 'AR=i686-w64-mingw32-ar' BINUTILS=~/binutils-2.26 CONFIGURE_ARGS="--host=i686-w64-mingw32"
if you have errors with undefined references to zlib (i.e. build/Linux-amd64/bfd/libbfd.a(compress.o):compress.c:(.text+0x7e): undefined reference to inflate), modify Makefile in hsdis: find the line $(CC) $(OUTFLAGS) $(CPPFLAGS) $(CFLAGS) $(SOURCE) $(DLDFLAGS) $(LIBRARIES) for the $(TARGET) target and append to the end -lz -L$(TARGET_DIR)/zlib, then run the build command again;
after that you should find the library hsdis-amd64.dll in hsdis\build\Linux-amd64\ for x64, or hsdis-i386.dll in hsdis\build\Linux-i586\ for x86.
I want to install redis on aix 6.1, but some problem happened and I can't find the solution to resolve this problem. Who can tell me the reason for this compiler error.
# /opt/freeware/bin/make
cd src && /opt/freeware/bin/make all
make[1]: Entering directory `/opt/software/redis-2.8.17/src'
CC adlist.o
/bin/sh: cc: not found.
make[1]: *** [adlist.o] Error 127
make[1]: Leaving directory `/opt/software/redis-2.8.17/src'
make: *** [all] Error 2
You're attempting to compile Redis without a C compiler (that's what cc is) installed or present on your $PATH.
Install one, or fix your $PATH.
If you don't need bleeding-edge, don't build it yourself, but use an RPM from Michael Perzl. Right now it goes up to redis 2.6.7.
If you are experienced in building from source, and don't mind altering some source code here and there, read Michael Perzls instructions. Compiling on AIX is not for the faint of heart.
If you want to save yourself a lot of white hairs and headaches, just buy a linux server and set up a good network connection.
Hope this helps, TW