currenty I'm trying to install Riak on the Raspberry Pi 3 for testing purposes. I used the following instruction from basho:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
I'm having problems compiling it from source. I tried to compile it on Raspbian Jessie and then switched to Ubuntu Server 16.04. Both times with the same result. It is not compiling and aborts at a certain point. I don't know what causes the problem since it only says: recipe for target 'util/perf_count.o' failed. Searching Google and the mailing list from basho weren't successful.
The version of gcc is gcc (Raspbian 4.9.2-10) 4.9.2. The version of Erlang is Erlang R16B02_basho8 (erts-5.10.3)
The commands i used are the following:
Installing Erlang:
wget http://s3.amazonaws.com/downloads.basho.com/erlang/otp_src_R16B02basho10.tar.gz
tar zxvf otp_src_R16B02-basho10.tar.gz
cd OTP_R16B02_basho10
./otp_build autoconf
./configure && make && sudo make install
Installing Riak:
wget http://s3.amazonaws.com/downloads.basho.com/riak/2.2/2.2.1/riak-2.2.1.tar.gz
tar zxvf riak-2.2.1.tar.gz
cd riak-2.2.1
make locked-deps
make rel
Any suggestions are welcome.
Output:
`./include/leveldb/atomics.h:155:15: note:
template argument deduction/substitution failed util/perf_count.cc:439:40:
note: deduced conflicting types for parameter ‘ValueT’
(‘unsigned int’ and‘int’ add_and_fetch(ptr_32, 1);`
`Makefile:190: recipe for target 'util/perf_count.o' failed
make[1]: *** [util/perf_count.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/home/pi/Riak/riak/deps/eleveldb/c_src/leveldb'
ERROR: Command [compile] failed!
Makefile:23: recipe for target 'compile' failed
make: *** [compile] Error 1`
After digging deeper I got some help from Basho's mailing list (many thanks).
The Link below shows the steps to solve this problem:
http://lists.basho.com/pipermail/riak-users_lists.basho.com/2017-April/019187.html
The next link is a detailed instruction, which helps to install Riak on the Raspberry Pi 3:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
Related
I am installing linux kernel 5.8.10 in my existing Ubuntu system.
After going all the steps. When I started to install modules by command sudo make modules_install , I found 2 errors.
I can't find any way to solve it. Please help if anyone familiar with this kind of errors.
Errors:
cp: cannot stat 'net/atm/atm.ko' : No such file or directory
make[1]: ***[scripts/Makefile.modinst:33: net/atm/atm.ko] Error 1
make: *** [Makefile:1387: _modinst_] Error 2
I am installing apache httpd 2.4.x on AIX 7.1 machine using xlc compiler. Make is successful. But make install is failing with the following error
Making install in modules Making install in aaa rm -f /home/u980868/apache/kiran/httpd-kiran/modules/mod_authn_file.so /home/u980868/apache/kiran/httpd-2.4.25/srclib/apr/libtool --silent --mode=install install mod_authn_file.la /home/u980868/apache/kiran/httpd-kiran/modules/ find: bad status-- /home/u980868/apache/kiran/httpd-kiran/modules/mod_authn_file.so install: File mod_authn_file.so was not found. make: 1254-004 The error code from the last command is 2. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop.
can someone please help.
I have installed the list of Required tools shown on the Build Environment Setup for Linux, including JEMALLOC, on my Raspberry Pi which has Raspbian Wheezy installed, fully updated, and setup for development. I have successfully built some of the listed tools (Bison, CMake 3.7.2). I have gcc and g++ (Raspbian 4.8.2-21rpi3rpi1) 4.8.2.
When I attempt to build mariadb 10.1.22 (master branch from the github repository) using cmake . -DBUILD_CONFIG=mysql_release I get an error:
CMake Error at cmake/jemalloc.cmake:38 (MESSAGE):
jemalloc is not found
Call Stack (most recent call first):
CMakeLists.txt:343 (CHECK_JEMALLOC)
After building JEMALLOC, I installed it into /usr/local using sudo make install. I have export JEMALLOC_PATH=/usr/local in my .bashrc.
I don't understand why CHECK_JEMALLOC is failing to find the correct files. A list of the file locations is:
/usr/local/bin/jemalloc.sh
/usr/local/bin/jemalloc-config
/usr/local/include/jemalloc
/usr/local/include/jemalloc/jemalloc.h
/usr/local/lib/pkgconfig/jemalloc.pc
/usr/local/lib/libjemalloc.so
/usr/local/lib/libjemalloc_pic.a
/usr/local/lib/libjemalloc.so.2
/usr/local/lib/libjemalloc.a
/usr/local/share/doc/jemalloc
/usr/local/share/doc/jemalloc/jemalloc.html
/usr/local/share/man/man3/jemalloc.3
I can attach a link to the CMake configure log, error log, and terminal output if needed.
UPDATE
I tried using just cmake . and the configuration part worked, but the make failed with the following error:
/home/user/Downloads/mariadb/server/storage/mroonga/vendor/groonga/lib/expr.c:6816:7: note: in expansion of macro ‘GRN_PTR_POP’
GRN_PTR_POP(&keywords, keyword);
^
cc: internal compiler error: Killed (program cc1)
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-4.8/README.Bugs> for instructions.
storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/build.make:257: recipe for target 'storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/expr.c.o' failed
make[2]: *** [storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/expr.c.o] Error 4
make[2]: Leaving directory '/home/user/Downloads/mariadb/server'
CMakeFiles/Makefile2:4420: recipe for target 'storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/all' failed
make[1]: *** [storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/all] Error 2
make[1]: Leaving directory '/home/user/Downloads/mariadb/server'
Makefile:152: recipe for target 'all' failed
make: *** [all] Error 2
I am trying to build hsdis.dll in my laptop 32-bit Windows. I read http://dropzone.nfshost.com/hsdis.htm instructions and got to know that I will have to follow those steps. I saw that I have to use the mingw64-i686-gcc-core. I followed the steps, but have always found this error.
make[2]: i686-w64-mingw32: Command not found
Makefile:246: recipe for target 'libiberty.a' failed
make[2]: *** [libiberty.a] Error 127
make[2]: Leaving directory '/home/User/hsdis/build/Linux-i586/libiberty'
Makefile:8045: recipe for target 'all-libiberty' failed
make[1]: *** [all-libiberty] Error 2
make[1]: Leaving directory '/home/User/hsdis/build/Linux-i586'
Makefile:192: recipe for target 'build/Linux-i586/bfd/libbfd.a' failed
make: *** [build/Linux-i586/bfd/libbfd.a] Error 2
I would also like to know how to use the directive PrintAssembly, because i wanted to see the assembly code, of a Java class.
I have already saw other posts here, but none of them helped.
Thanks in advance
Here are the steps which help me to build it (x64 version, x86 should be almost the same):
download and unpack the latest hsdis sources as described in the building manual from the http://hg.openjdk.java.net/jdk8u/jdk8u/hotspot/tags;
download the latest bintuils-2.26.tar.gz package from the http://mirror.tochlab.net/pub/gnu/binutils/;
copy it to your Cygwin home directory and unpack it from the Cygwin terminal (this is very important, otherwise you may get permission problems):
tar -xzvf ./binutils-2.26.tar.gz
install the following Cygwin packages: mingw64-x86_64-gcc-core for x64 or mingw64-i686-gcc-core for x86, diffutils and make;
go to hsdis directory;
for x64 library build with the command: make OS=Linux MINGW=x86_64-w64-mingw32 'AR=x86_64-w64-mingw32-ar' BINUTILS=~/binutils-2.26 CONFIGURE_ARGS="--host=x86_64-w64-mingw32", for x86 library build with the command: make OS=Linux MINGW=i686-w64-mingw32 'AR=i686-w64-mingw32-ar' BINUTILS=~/binutils-2.26 CONFIGURE_ARGS="--host=i686-w64-mingw32"
if you have errors with undefined references to zlib (i.e. build/Linux-amd64/bfd/libbfd.a(compress.o):compress.c:(.text+0x7e): undefined reference to inflate), modify Makefile in hsdis: find the line $(CC) $(OUTFLAGS) $(CPPFLAGS) $(CFLAGS) $(SOURCE) $(DLDFLAGS) $(LIBRARIES) for the $(TARGET) target and append to the end -lz -L$(TARGET_DIR)/zlib, then run the build command again;
after that you should find the library hsdis-amd64.dll in hsdis\build\Linux-amd64\ for x64, or hsdis-i386.dll in hsdis\build\Linux-i586\ for x86.
I'm trying to install Wordnet 3.0 on my Mac which is OSX 10.8.
I've configured it, but when I try make,
I get a bunch of errors...
.....
/usr/include/tkDecls.h:1692: error: expected specifier-qualifier-list before ‘XColor’
make[2]: *** [wishwn-tkAppInit.o] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
and then if I proceed with make install
Making install in doc
Making install in html
make[3]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/WordNet-3.0/doc/html" || /Users/ravenyj/Desktop/WordNet-3.0/install-sh -d "/usr/local/WordNet-3.0/doc/html"
mkdir: /usr/local/WordNet-3.0: Permission denied
make[3]: *** [install-htmlDATA] Error 1
make[2]: *** [install-am] Error 2
make[1]: *** [install-recursive] Error 1
make: *** [install-recursive] Error 1
I have not made any modification to Makefile, and don't know if I should.
Could anyone please help me out on this?
Using brew is orders of magnitude simpler. Just:
brew install wordnet
The following worked for me to get it to compile:
./configure CFLAGS="-I/usr/X11R6/include -L/usr/X11R6/lib -lX11 -fpermissive" CC=/usr/bin/gcc
then
make
sudo make install
after that it's showing up fine for me in
/usr/local/WordNet-3.0/
I then added WordNet to my $PATH by editing my .bash_profile file, adding the line:
export PATH=/usr/local/WordNet-3.0/bin:$PATH
opening a new Terminal window, I could then type:
$ wn
and see that it's now working fine
Do the following to install WordNet in fastest manner:
Press Command+Space and type Terminal and press enter/return key.
Run in Terminal app:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" < /dev/null 2> /dev/null
...and press enter/return key. Wait for the command to finish.
Run:
brew install wordnet
After installation use 'wn' command in terminal to access the application.
I had the same problem too until I saw this webpage: http://ticanchang.blogspot.com/2010/04/install-wordnet-in-mac.html
In the folder of your downloaded WordNet package, type:
./configure
make
sudo make install
You need to include "sudo" because normally a user do not have the permission to update the /usr/local folder.