I get this error in my log files every time a cache file doesn't exist it seems. On the first page load, I always get this error
[message] => filemtime(): stat failed for [...]/runtime/cache/my/myapp03eab921185f7b68bbca50d8debc0dda.bin
[file] => [...]/vendor/yiisoft/yii2/caching/FileCache.php
[line] => 113
It doesn't happen anymore on next page loads but that one time is really annoying since the slack bot watcher is spamming our channel with this useless warning. Is there a way to avoid that, or is it a permission problem?
The "runtime", "cache" and "my" folders all have 775.
Update
Turns out the issue is that I'm using error_get_last() that is also getting warning-level errors. So it's a different issue entirely, not Yii-related
Make sure that you don't have enabled scream in your php.ini. Warnings from this filemtime() call should be suppressed by # operator, but scream setting can override this operator and generate warning anyway.
if (#filemtime($cacheFile) > time()) {
// ...
}
You must be getting this in PHP 7.1. try to run this with PHP 5.5 and see if you are getting the same error.
To reproduce you need to delete all files from runtime/cache directory
Then start app again(reload page) and look into runtime/cache. It is empty
Yii2 doesn't make cache again
Got same issue in Yii. The error was on the same string (FileCache.php:113)
if (#filemtime($cacheFile) > time()) {...
In my case reason was that my custom php error handler (heir
of the class yii\base\ErrorHandler) didn't check if
error type need to be handled according error_reporting().
Custom handlers allways gets every error, even muted by Error Control operator (#)
https://www.php.net/manual/en/function.set-error-handler.php
error_reporting() settings will have no effect and your error handler will be called regardless
Related
We got an error at the top of some pages: Warning: Invalid argument supplied for foreach() in /public_html/classes/Hook.php on line 491.
I've read that it could be a problem with the foreach loop or arrays, but I don't know php and don't know how to fix it.
In line 491 I find: foreach ($results as $result) {
Another problem is that when I enter a category from the client side, I can't go to the 2nd/3rd/4th/5th page, only one page is displayed and the next ones don't want to load. The error Warning: Invalid argument supplied for foreach() in /public_html/classes/Hook.php on line 491 appears on pages that do not want to load.
I also get an error after enabling debug mode:
PrestaShopBundle\EntityTab.
The association PrestaShopBundle\EntityTab#tabLangs refers to the owning side field PrestaShopBundle\EntityTabLang#tab which does not exist.
I changed:
#ORM\OneToMany(targetEntity="PrestaShopBundle\Entity\TabLang", mappedBy="tab")
to
#ORM\OneToMany(targetEntity="PrestaShopBundle\Entity\TabLang", mappedBy="id")
insrc/PrestaShopBundle/Entity/Tab.php but it doesn't help.
PHP debug info debug info
I managed to solve the problem - I had to change active to m.active in the body of the sql query. Thank you
I get the following error:
Keen.delete(:iron_worker_analytics, filters: [{:property_name => 'start_time', :operator => 'eq', :property_value => '0001-01-01T00:00:00Z'}])
Keen::ConfigurationError: Keen IO Exception: Project ID must be set
However, when I set the value, I get the following:
warning: already initialized constant KEEN_PROJECT_ID
iron.io/env.rb:36: warning: previous definition of KEEN_PROJECT_ID was here
Keen works fine when I run the app and load the values from a env.rb file but from the console I cannot get past this.
I am using the ruby gem.
I figured it out. The documentation is confusing. Per the documentation:
https://github.com/keenlabs/keen-gem
The recommended way to set keys is via the environment. The keys you
can set are KEEN_PROJECT_ID, KEEN_WRITE_KEY, KEEN_READ_KEY and
KEEN_MASTER_KEY. You only need to specify the keys that correspond to
the API calls you'll be performing. If you're using foreman, add this
to your .env file:
KEEN_PROJECT_ID=aaaaaaaaaaaaaaa
KEEN_MASTER_KEY=xxxxxxxxxxxxxxx
KEEN_WRITE_KEY=yyyyyyyyyyyyyyy KEEN_READ_KEY=zzzzzzzzzzzzzzz If not,
make a script to export the variables into your shell or put it before
the command you use to start your server.
But I had to set it explicitly as Keen.project_id after doing a Keen.methods.
It's sort of confusing since from the docs, I assumed I just need to set the variables. Maybe I am misunderstanding the docs but it was confusing at least to me.
There were some language problems in my site which uses a specific theme so I thought,I should pick out the language pack edit and reload it. Because I couldn't find a way to edit it using browser on admin panel.
I just pressed a button named export language packet. I don't know if something happened that time. But it didn't give me a file (an exported file I mean) . So I didn't do anything else. But since that time I can't reach my admin panel. While I write the URL it shows me a big white screen.
On the other side the site itself (not admin panel) is reachable. What can I do to fix my problem?
Hi,
This is the error
( ! ) SCREAM: Error suppression ignored for
( ! ) Parse error: syntax error, unexpected T_ENCAPSED_AND_WHITESPACE, expecting ']' in C:\wamp\www\httpdocs\translations\tr\admin.php on line 586
Call Stack
# Time Memory Function Location
1 0.0009 690552 {main}( ) ..\index.php:0
2 1.7995 9942280 DispatcherCore->dispatch( ) ..\index.php:50
3 2.0567 10375504 ControllerCore::getController( ) ..\Dispatcher.php:342
4 2.0686 12512728 AdminControllerCore->__construct( ) ..\Controller.php:128
5 2.0689 12514200 AdminControllerCore->l( ) ..\AdminController.php:304
6 2.0711 12612344 TranslateCore::getAdminTranslation( ) ..\AdminController.php:1737
The error you got is in your translation file in file translations\tr\admin.php on line number 586.
To fix that error, take a backup of that file, i.e. keep a copy of that file in some other place, then try to find out the syntax error you got there. It is some kind of PHP syntax error there in that translation file. As the translation file is only for the admin section, therefore your site front end may be fine and your site admin section is not working.
If you are not able to find that error and fix it, then delete all contents from that file, and then try to load the admin section.
You should use a translation pack which is provided by prestashop, ie download it from the prestashop http://www.prestashop.com/en/translations .
Also if you want to edit translations, use admin. In your question you mentioned, that you were not able to edit translations, please do provide details for that problem, and also try to edit translations while keeping error reporting on, so if there is any problem, you will get the errors printed. If you got errors printed, then update your question with that error message.
Let me know if you still got any questions.
I feel like this should be a simple problem, but I'm pulling my hair out trying to track it down. I'm installed the chargify_api_ares gem, but can't do even basic things such as
Chargify::Subscription.create
As I get this path error. I feel like this must be a gem issue somehow but don't know where to go from here.
UPDATE: bundle show chargify_api_ares shows the correct path, I just somehow can't access it. Still trying random environment related things.
Looks like this is the source of the problem, in active_resource\base.rb:
# Gets the \prefix for a resource's nested URL (e.g., <tt>prefix/collectionname/1.json</tt>)
# This method is regenerated at runtime based on what the \prefix is set to.
def prefix(options={})
default = site.path
default << '/' unless default[-1..-1] == '/'
# generate the actual method based on the current site path
self.prefix = default
prefix(options)
end
As I understand it, Chargify.subdomain should be setting the site.path, but I don't understand activeresource well enough yet to know what's happening and will continue to dig.
I too had the same issue.
I executed the following on the console
Chargify.configure do |c|
c.api_key = "<<api_key>>"
c.subdomain = "<<subdomain>>"
end
After that performing any Chargify console commands went through fine.
In a previous ticket i asked about logging PHP errors in MySQL which gives me:
function myErrorHandler($errno, $errstr, $errfile, $errline)
{
// mysql connect etc here...
$sql = "INSERT INTO `error_log` SET
`number` = ".mysql_real_escape_string($errno).",
`string` = ".mysql_real_escape_string($errstr).",
`file` = ".mysql_real_escape_string($errfile).",
`line` = ".mysql_real_escape_string($errline);
mysql_query($sql);
// Don't execute PHP internal error handler
return true;
}
// set to the user defined error handler
$new_error_handler = set_error_handler("myErrorHandler");
I can make this work but only if it is triggerred like this:
trigger_error("message here");
However, I also want the error handler to be called for all errors such as syntax errors like:
echo "foo;
But these errors are just outputted to the screen, what am i doing wrong?
You can only handle runtime errors with a custom error handler. The echo "foo error in your example happens when parsing (i.e. reading in) the source. Since PHP can not fully parse the code, it can also not run your error handler on this error.
If You're forced to test if syntax is correct, You can use php_check_syntax function, with filename parameter PHP Manual php_check_syntax
php_check_syntax also provides second parameter, witch when used will be populated by the error string, as far as i remember
That's indeed terrible way of error logging
You don't need not a single advantage of a database. Would you make a database lookup for the certain line number? Or order your results by file name?
database is a subject of many errors itself.
You've been told already that it's impossible to catch a parse error at the program logic level, because a syntactically wrong program will never run.
Let's take your code as an example. It will raise a MySQL error (because of poorly formed query) which you will never see. As well as any other errors occurred. That's what I am talking about.