I want to close my windows form when it loses focus.
I mapped Me.Close() function inside lost focus object but when losing focus, the form gets minimised.
Me.Close() close only the form and not the program itself. If this is the only active form then it will get minimized so that the program can still be active. I guess you mean Application.Exit() which actually close the application.
You need to use Deactivate if dealing with forms, like:
Private Sub Form1_Deactivate(sender As Object, e As EventArgs) Handles Me.Deactivate
MsgBox("Lost focus")
Application.Exit()
End Sub
Related
A very basic/simple question with I'm sure, an even simpler answer, but I just cannot figure it out. I have two forms that a user can switch between using the corresponding menu link on each form. I want to be able to keep the previous form visible on screen until the new form is displayed. In it's current state, the form disappears off screen for around 3/4 of a second before the new one is shown and from a UI/design perspective, I'd like this to stay on screen.
I'm currently using the below code to close and open the forms:
form1.Show()
Me.Close()
form2.Show()
Me.Close
I have tried experimenting with ShowDialog() which does seem to keep it on screen on first run, but clicking back into the form a second time says an error message:
System.InvalidOperationException: 'Form that is already visible cannot be displayed as a modal dialog box. Set the form's visible property to false before calling showDialog.'
Is there a simple line of code to achieve what I want here?
If there is some time consuming code in the Form.Load event (for example, if data is being retrieved from a database) then the following code might help.
Private Sub Form2_Shown(sender As Object, e As EventArgs) Handles Me.Shown
'Assuming default instances
Form1.Close()
End Sub
Posting an answer incase there's an inherit reason this is not best practice or to avoid doing this, but using the below sped it up:
Private Sub menu1_Click(sender As Object, e As EventArgs) Handles menu1.Click
form1.Show()
form1.Refresh()
Me.Close()
End Sub
This was inspired by adding in a Application.DoEvents working, so adjusted the code to avoid that dreaded line.
I've come across a peculiar focusing issue. I have created the following "search" program:
It runs in the background.
When you double-tap the Ctrl key it becomes visible.
You can type in the textbox because the form has focus.
If the form loses focus (I click on my desktop, for example), it disappears after 3 seconds.
I double-tap the Ctrl key again, and again it becomes visible.
But this time, no matter what I try, the form is not focused and I cannot type in the textbox without first manually clicking on the form.
What's particularly interesting is that when I run this program in debug mode from Visual Studios, the program regains focus upon double-tapping Ctrl key and becoming visible, and I can immediately start typing in the text box. However, when I build this program and run it alone, the program appears but does not regain focus upon double-tapping Ctrl key, and therefore I cannot type in the text box until I manually click the form.
After Me.Show() I have tried:
Me.Focus()
Me.Validate()
Me.Select()
Textbox1.Select()
Textbox1.Focus()
The form is topmost and normally running in administrator, but the same problem arises regardless.
The issue can be recreated in a more simple manner. Create a form with
Button ("Button1")
TextBox
Two timers ("hideForm", "showForm") both with intervals of 1000
Code:
Public Class Form1
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
hideForm.Start()
sender.Enabled = False
End Sub
Private Sub hideForm_Tick(sender As Object, e As EventArgs) Handles hideForm.Tick
Me.Hide()
hideForm.Stop()
showForm.Start()
End Sub
Private Sub showForm_Tick(sender As Object, e As EventArgs) Handles showForm.Tick
showForm.Stop()
Me.Show()
Me.Activate()
End Sub
End Class
Click the button, and immediately click on a different window (so the form loses focus). Wait until the form is hidden and shown again. The textbox should have focus. Try typing.
If the program is run in debugging mode in Visual Studios, it works as expected. If you build the program and run it outside of VS, the form will reappear without focus, and you cannot type in the textbox without manually selecting the form.
Sorry for the long-winded explanation. It's a difficult issue to properly describe.
Try the form event handler Activate. Inside that method, you can use setFocus to gain focus for that particular Text Box. I know this answer is too late. But hope this helps someone.
Private Sub Form_Activate()
TextBox1.SetFocus
End Sub
Try an event handler for Form_Activate, and within that handler pass the focus to your textbox.
Instead of Focus, you can also try TextBox1.Select. This SO link provides some additional information and something about the difference between Focus and Select.
Select the Textbox you want to assign a focus to in the Design View Window.
Under the Properties window, set the TabIndex to 0 (zero).
I didn't even have to use the TextBox1.Focus() command. It still bothers me that the TabIndex overrides the Focus command.
What I tried (and worked for me), was to set the Focus() of the Textbox in the event handler Shown() [VB]:
Private Sub Form1_Shown(sender As Object, e As EventArgs) Handles MyBase.Shown
Me.Textbox1.Focus()
End Sub
Note: the Select() method just didn't do the job. I hope this helps anyone else that comes with this same issue.
Alright, so I am writing a program in VB that has 2 forms. These forms are to rotate via button click and be able to close the entire program no matter what form is being shown. As of now, what is happening is, that if I launch the program and click X to close, it will close. However, if I click the button to show Form2, the close button X doesn't close the program and the program keeps running. Also consider that if I change from Form1 to Form2, then back to Form1, Form1 no longer has the ability to close the program like it does before the button click. Any help? This the code I am using in each for, minus the close commands. I feel like the command for closing the forms needs to be outside of the Private Sub for the Button.
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
'Switches to Daily
Dim FirstForm As New Form1
FirstForm.Show()
Me.Hide()
'TODO: Close Program on X
End Sub
me.Close() ' Will close the form.
application.Exit ' Will close the application.
Read through .NET End vs Form.Close() vs Application.Exit Cleaner way to close one's app for a better description for this. Some good learning.
Hi Guys i'm new to Visual Basic Coding, and i can't seem to get where's my mistake on my coding, i'm trying to create a button that opens a new form while closing the current form.
i have two forms, form 1 is MainForm, form 2 is SearchForm
Whenever i use this code:
Private Sub SearchMButton_Click(sender As Object, e As EventArgs) Handles SearchMButton.Click
MainForm.Close()
SearchForm.Show()
End Sub
End Class
it will generate an error and says i need to replace MainForm.Close() into Me.Close()
When i Use this
Private Sub SearchMButton_Click(sender As Object, e As EventArgs) Handles SearchMButton.Click
Me.Close()
SearchForm.Show()
End Sub
End Class
It closes both Forms and it doesn't leave any Form Open. Kindly direct me to the proper path, thanks in advance.
You need to Hide the form rather than closing it. Since it's your main form, when it closes, the application exits.
Standard UI guidelines are to leave the main form open, and open search form on top of that. If you need to block the main form, while search criteria are selected, use .ShowDialog, instead of just .Show.
.NET WinForms programming pattern kind of implies that you never close your main form. If you deviate from this approach, you are guaranteed to encounter all sorts of layout and display issues. So please don't. You can .Hide the main form, if it needs to go to system tray or run in background.
anybody have an idea how to write a code if the user clicks outside windows form, the form will automatically close? I.e., I had two forms, when i show form2 and then i click outside of it, form 2 will closed.
Does this help? Try the first two solutions, one of which should work for you.
Winforms: Close modal dialog when clicking outside the dialog
You can simply utilize the LostFocus built-in event of the Form like this
Private Sub Form1_LostFocus(ByVal sender As Object, ByVal e As EventArgs) _
Handles Me.LostFocus
Me.Close()
End Sub