I am trying to move subforms in a standard pdf file (not a dynamic XML). I have an old copy of LiveCycle (ES2) and have produced the following code
xfa.host.setFocus(clearArrows);
var gridX = xfa.layout.x(gridPICK);
var gridY = xfa.layout.y(gridPICK);
var gridW = xfa.layout.w(gridPICK);
var gridH = xfa.layout.h(gridPICK);
var markerDim = 0;
var mouseX = event.target.mouseX;
var newX = (mouseX + "points").toString();
var mouseY = xfa.layout.h(Page3) - event.target.mouseY;
var newY = (mouseY + "points").toString();
for (var i = 0; i < 10; i++){
var indicatorObject = xfa.resolveNode("Indicator[" + i.toString() + "]");
var indicatorX = xfa.layout.x(indicatorObject);
if (indicatorX < gridX) {
var pointIndicator = indicatorObject;
pointIndicator.presence = "visible";
xfa.host.setFocus(pointIndicator.Description);
xfa.host.openList("Indicator[" + i.toString() + "].Description");
i = 10;
}
}
if (mouseX <= gridX + markerDim)
{
pointIndicator.x = (gridX + markerDim + "points").toString();
}
else if (mouseX >= gridX + gridW - markerDim)
{
pointIndicator.x = (gridX + gridW - markerDim + "points").toString();
}
else
{
pointIndicator.x = newX;
}
if (mouseY >= gridY + gridH - markerDim)
{
pointIndicator.y = (gridY + gridH - markerDim + "points").toString();
}
else if (mouseY <= gridY + markerDim)
{
pointIndicator.y = (gridY + markerDim + "points").toString();
}
else
{
pointIndicator.y = newY;
}
This works fine if I extend the features and use it on a PC or mac however if I try to use it on an ipad it does not work. Essentially this code is placed on the click event of a large button in a grid square.
Any help would be greatly appreciated.
I'm afraid I don't think you'll be able to get this to work.
The iPad version of Adobe Reader does not support XFA forms designed in LiveCycle Designer.
Related
PostGIS has this function ST_GeomFromGeoHash to get the bounding box geometry of the geohash area (https://postgis.net/docs/ST_GeomFromGeoHash.html), but it has not been ported to BigQuery yet. Is there any workaround?
I've implemented the following BigQuery UDF that converts a geohash of arbitrary precision to a bounding box geometry:
CREATE OR REPLACE FUNCTION dataset.geohash_to_bbox(geohash STRING)
RETURNS STRING
LANGUAGE js AS """
var BASE32_CODES = "0123456789bcdefghjkmnpqrstuvwxyz";
var BASE32_CODES_DICT = {};
for (var i = 0; i < BASE32_CODES.length; i++) {
BASE32_CODES_DICT[BASE32_CODES.charAt(i)] = i;
}
var ENCODE_AUTO = 'auto';
var MIN_LAT = -90;
var MAX_LAT = 90;
var MIN_LON = -180;
var MAX_LON = 180;
var decode_bbox = function (hash_string) {
var isLon = true,
maxLat = MAX_LAT,
minLat = MIN_LAT,
maxLon = MAX_LON,
minLon = MIN_LON,
mid;
var hashValue = 0;
for (var i = 0, l = hash_string.length; i < l; i++) {
var code = hash_string[i].toLowerCase();
hashValue = BASE32_CODES_DICT[code];
for (var bits = 4; bits >= 0; bits--) {
var bit = (hashValue >> bits) & 1;
if (isLon) {
mid = (maxLon + minLon) / 2;
if (bit === 1) {
minLon = mid;
} else {
maxLon = mid;
}
} else {
mid = (maxLat + minLat) / 2;
if (bit === 1) {
minLat = mid;
} else {
maxLat = mid;
}
}
isLon = !isLon;
}
}
return "POLYGON (( " + minLon + " " + minLat + ", " + maxLon + " " + minLat + ", " + maxLon + " " + maxLat + ", " + minLon + " " + maxLat + ", " + minLon + " " + minLat + "))";
};
return decode_bbox(geohash);
""";
Example usage:
select <dataset>.geohash_to_geom("ttnfv2u");
>> POLYGON((77.2119140625 28.6083984375, 77.2119140625 28.65234375, 77.255859375 28.65234375, 77.255859375 28.6083984375, 77.2119140625 28.6083984375))
BigQuery has ST_GEOGPOINTFROMGEOHASH which returns the central point. There is currently no function that returns the box though. The UDF in another answer is often a reasonable workaround, but you should be aware of its usage limitation.
GeoHash normally represents a rectangle on a flat 2D map. BigQuery works with Geography, with geodesic edges, so an edge between two points with same latitude does not follow the parallel, but being geodesic line is a shorter route closer to the pole. So the BigQuery polygon is a bit different from 2D box. You can often ignore the differences, but it might give you wrong results depending on how you use this polygon.
Sorry that this is so similar to a recent post but I can't find the solution anywhere. I have created a simple script that loops through each artboard in an open illustrator document and exports it as a separate PNG file. All is working well except that I want to set the resolution to 150 dpi and not the default 72 dpi, for production reasons. This is an option that you can set when exporting manually to PNG but I don't seem to be able to set it in the PNG options in the code, although the script runs without errors it ignores the resolution setting. Could someone let me know how to do this, many thanks. Code as follows:
var doc = app.activeDocument;;//Gets the active document
var fileName = doc.name.slice(0, 9);//Gets the G Number
var numArtboards = doc.artboards.length;//returns the number of artboards in the document
var filePath = (app.activeDocument.fullName.parent.fsName).toString().replace(/\\/g, '/');
var options = new ExportOptionsPNG24();
for (var i = 0; i < numArtboards; i++ ) {
doc.artboards.setActiveArtboardIndex( i );
options.artBoardClipping = true;
options.matte = false;
options.horizontalScale = 100;
options.verticalScale = 100;
options.transparency = true;
var artboardName = doc.artboards[i].name;
//$.writeln("artboardName= ", artboardName);
var destFile = new File(filePath + "/" + fileName + " " + artboardName + ".png");
//$.writeln("destFile= ",destFile);
doc.exportFile(destFile,ExportType.PNG24,options);
}
After doing some digging I've found that if you use imageCapture you can set the resolutuion. So new script below. thanks to CarlosCanto for providing this link via the Adobe Forum https://forums.adobe.com/message/9075307#9075307
var doc = app.activeDocument;;//Gets the active document
var fileName = doc.name.slice(0, 9);//Gets the G Number
var numArtboards = doc.artboards.length;//returns the number of artboards in the document
var filePath = (app.activeDocument.fullName.parent.fsName).toString().replace(/\\/g, '/');
var options = new ImageCaptureOptions();
for (var i = 0; i < numArtboards; i++) {
doc.artboards.setActiveArtboardIndex(i);
var activeAB = doc.artboards[doc.artboards.getActiveArtboardIndex()];
options.artBoardClipping = true;
options.resolution = 150;
options.antiAliasing = true;
options.matte = false;
options.horizontalScale = 100;
options.verticalScale = 100;
options.transparency = true;
var artboardName = doc.artboards[i].name;
var destFile = new File(filePath + "/" + fileName + " " + artboardName + ".png");
doc.imageCapture(destFile, activeAB.artboardRect, options);
}
Please check if I print obj then in data array same elements gets inserted twice instead of different. If n =2 then the first element gets pushed twice.
genLLEles(n, orgObj, homeSecObj, defaultElementObj, previousElements, socket) {
let that = this;
let arr = [];
let obj = {
dataArray: [],
socketId: socket.USER_ID,
requestId: "/sync#" + socket.id + socket.USER_ID + "#" + new Date().getTime(),
moduleName: "ORG",
action: "INSERT",
userId: socket.USER_ID
};
console.log("\n\ should be oce");
for (let i = 0; i < n; i++) { //n defines count of how many elements to be created
let temp = defaultElementObj; //selected object to insert
let _id = homeSecObj.KEY_VAL + "_TSK:" + defaultElementObj.SUB_KEY_TYPE + "_" + Date.now() + "_" + Math.floor(Math.random() * (10000 - 1)) + 1;
console.log(obj.dataArray.length);
if (obj.dataArray.length == 0) {
temp.CML_PREVIOUS_ID = previousElements.length <= 0 ? "-1" : that.getPreObj(previousElements).KEY_VAL;
temp.CML_NEXT_ID = "1";
temp.ORG_ID = orgObj.ORG_ID;
temp.DEPT_ID = orgObj.DEPT_ID;
temp.KEY_VAL = _id;
temp.CML_ID = _id;
temp.CML_REF_ID = homeSecObj.KEY_VAL;
temp.ACTIVE_STATUS = "1";
temp.CML_IMAGE_PATH = "";
temp.SYNC_PENDING_STATUS = "1";
} else {
obj.dataArray[obj.dataArray.length - 1].CML_NEXT_ID = _id;
console.log("HERE", obj.dataArray[obj.dataArray.length - 1]);
temp.CML_PREVIOUS_ID = obj.dataArray.length < 0 ? "-1" : obj.dataArray[obj.dataArray.length - 1].KEY_VAL;
temp.CML_NEXT_ID = "1";
temp.ORG_ID = orgObj.ORG_ID;
temp.DEPT_ID = orgObj.DEPT_ID;
temp.KEY_VAL = _id;
temp.CML_ID = _id;
temp.CML_REF_ID = homeSecObj.KEY_VAL;
temp.ACTIVE_STATUS = "1";
temp.CML_IMAGE_PATH = "";
temp.SYNC_PENDING_STATUS = "1";
}
obj.dataArray.push(temp);
}
console.log("\n\genLLEles ==> ", obj, "\n\n");
/*return obj;*/
}
from the above code, the values in both the if and else are coming from same parameters. So you are inserting the same values multiple times into the dataArray.
Can anyone help me understand why this below would not remove named cals. It seems to work fine until the very last line where it does the save. I don't get any exceptions or error messages.
When i look in QV Management console under System>Licenses i still see the ones that were supposed to be removed (Named user CALs)
Client Build Number: 11.20.13314.0
QMSClient Client;
string QMS = "http://localhost:4799/QMS/Service";
Client = new QMSClient("BasicHttpBinding_IQMS", QMS);
string key = Client.GetTimeLimitedServiceKey();
ServiceKeyClientMessageInspector.ServiceKey = key;
List<ServiceInfo> MyQVS = Client.GetServices(ServiceTypes.QlikViewServer);
Client.ClearQVSCache(QVSCacheObjects.All);
CALConfiguration myCALs = Client.GetCALConfiguration(MyQVS[0].ID, CALConfigurationScope.NamedCALs);
List<AssignedNamedCAL> currentNamedCALs = myCALs.NamedCALs.AssignedCALs.ToList();
List<int> indexToRemove = new List<int>();
int cnt = 1;
for (int i = 0; i < currentNamedCALs.Count; i++)
{
if ((currentNamedCALs[i].QuarantinedUntil < System.DateTime.Now)
&& (currentNamedCALs[i].LastUsed < DateTime.Now.AddDays(daysFromToday)))
{
Console.WriteLine("[" + cnt + "] " + currentNamedCALs[i].UserName +
"; Last used: " + currentNamedCALs[i].LastUsed);
indexToRemove.Add(i);
cnt++;
}
}
Console.WriteLine();
for (int i = indexToRemove.Count; i > 0; i--)
{
if (currentNamedCALs[indexToRemove[i - 1]] != null)
{
currentNamedCALs.RemoveAt(indexToRemove[i - 1]);
}
}
Console.WriteLine("\nDone");
myCALs.NamedCALs.AssignedCALs = currentNamedCALs;
Client.SaveCALConfiguration(myCALs);
I have a logic to export avery label pdf. The logic exports the pdf with labels properly but when i print that pdf, the page size measurements (Page properties) that i pass isn't matching with the printed page.
Page Properties
Width="48.5" Height="25.4" HorizontalGapWidth="0" VerticalGapHeight="0" PageMarginTop="21" PageMarginBottom="21" PageMarginLeft="8" PageMarginRight="8" PageSize="A4" LabelsPerRow="4" LabelRowsPerPage="10"
The above property values are converted equivalent to point values first before applied.
Convert to point
private float mmToPoint(double mm)
{
return (float)((mm / 25.4) * 72);
}
Logic
public Stream SecLabelType(LabelProp _label)
{
List<LabelModelClass> Model = new List<LabelModelClass>();
Model = RetModel(_label);
bool IncludeLabelBorders = false;
FontFactory.RegisterDirectories();
Rectangle pageSize;
switch (_label.PageSize)
{
case "A4":
pageSize = iTextSharp.text.PageSize.A4;
break;
default:
pageSize = iTextSharp.text.PageSize.A4;
break;
}
var doc = new Document(pageSize,
_label.PageMarginLeft,
_label.PageMarginRight,
_label.PageMarginTop,
_label.PageMarginBottom);
var output = new MemoryStream();
var writer = PdfWriter.GetInstance(doc, output);
writer.CloseStream = false;
doc.Open();
var numOfCols = _label.LabelsPerRow + (_label.LabelsPerRow - 1);
var tbl = new PdfPTable(numOfCols);
var colWidths = new List<float>();
for (int i = 1; i <= numOfCols; i++)
{
if (i % 2 > 0)
{
colWidths.Add(_label.Width);
}
else
{
colWidths.Add(_label.HorizontalGapWidth);
}
}
var w = iTextSharp.text.PageSize.A4.Width - (doc.LeftMargin + doc.RightMargin);
var h = iTextSharp.text.PageSize.A4.Height - (doc.TopMargin + doc.BottomMargin);
var size = new iTextSharp.text.Rectangle(w, h);
tbl.SetWidthPercentage(colWidths.ToArray(), size);
//var val = System.IO.File.ReadLines("C:\\Users\\lenovo\\Desktop\\test stock\\testing3.txt").ToArray();
//var ItemNoArr = Model.Select(ds => ds.ItemNo).ToArray();
//string Header = Model.Select(ds => ds.Header).FirstOrDefault();
int cnt = 0;
bool b = false;
int iAddRows = 1;
for (int iRow = 0; iRow < ((Model.Count() / _label.LabelsPerRow) + iAddRows); iRow++)
{
var rowCells = new List<PdfPCell>();
for (int iCol = 1; iCol <= numOfCols; iCol++)
{
if (Model.Count() > cnt)
{
if (iCol % 2 > 0)
{
var cellContent = new Phrase();
if (((iRow + 1) >= _label.StartRow && (iCol) >= (_label.StartColumn + (_label.StartColumn - 1))) || b)
{
b = true;
try
{
var StrArr = _label.SpineLblFormat.Split('|');
foreach (var x in StrArr)
{
string Value = "";
if (x.Contains(","))
{
var StrCommaArr = x.Split(',');
foreach (var y in StrCommaArr)
{
if (y != "")
{
Value = ChunckText(cnt, Model, y, Value);
}
}
if (Value != null && Value.Replace(" ", "") != "")
{
cellContent.Add(new Paragraph(Value));
cellContent.Add(new Paragraph("\n"));
}
}
else
{
Value = ChunckText(cnt, Model, x, Value);
if (Value != null && Value.Replace(" ", "") != "")
{
cellContent.Add(new Paragraph(Value));
cellContent.Add(new Paragraph("\n"));
}
}
}
}
catch (Exception e)
{
var fontHeader1 = FontFactory.GetFont("Verdana", BaseFont.CP1250, true, 6, 0);
cellContent.Add(new Chunk("NA", fontHeader1));
}
cnt += 1;
}
else
iAddRows += 1;
var cell = new PdfPCell(cellContent);
cell.FixedHeight = _label.Height;
cell.HorizontalAlignment = Element.ALIGN_LEFT;
cell.Border = IncludeLabelBorders ? Rectangle.BOX : Rectangle.NO_BORDER;
rowCells.Add(cell);
}
else
{
var gapCell = new PdfPCell();
gapCell.FixedHeight = _label.Height;
gapCell.Border = Rectangle.NO_BORDER;
rowCells.Add(gapCell);
}
}
else
{
var gapCell = new PdfPCell();
gapCell.FixedHeight = _label.Height;
gapCell.Border = Rectangle.NO_BORDER;
rowCells.Add(gapCell);
}
}
tbl.Rows.Add(new PdfPRow(rowCells.ToArray()));
_label.LabelRowsPerPage = _label.LabelRowsPerPage == null ? 0 : _label.LabelRowsPerPage;
if ((iRow + 1) < _label.LabelRowsPerPage && _label.VerticalGapHeight > 0)
{
tbl.Rows.Add(CreateGapRow(numOfCols, _label));
}
}
doc.Add(tbl);
doc.Close();
output.Position = 0;
return output;
}
private PdfPRow CreateGapRow(int numOfCols, LabelProp _label)
{
var cells = new List<PdfPCell>();
for (int i = 0; i < numOfCols; i++)
{
var cell = new PdfPCell();
cell.FixedHeight = _label.VerticalGapHeight;
cell.Border = Rectangle.NO_BORDER;
cells.Add(cell);
}
return new PdfPRow(cells.ToArray());
}
A PDF document may have very accurate measurements, but then those measurements get screwed up because the page is scaled during the printing process. That is a common problem: different printers will use different scaling factors with different results when you print the document using different printers.
How to avoid this?
In the print dialog of Adobe Reader, you can choose how the printer should behave:
By default, the printer will try to "Fit" the content on the page, but as not every printer can physically use the full page size (due to hardware limitations), there's a high chance the printer will scale the page down if you use "Fit".
It's better to choose the option "Actual size". The downside of using this option is that some content may get lost because it's too close to the border of the page in an area that physically can't be reached by the printer, but the advantage is that the measurements will be preserved.
You can set this option programmatically in your document by telling the document it shouldn't scale:
writer.AddViewerPreference(PdfName.PRINTSCALING, PdfName.NONE);
See How to set initial view properties? for more info about viewer preferences.