This question already has answers here:
Vlookup using 2 columns to reference another
(2 answers)
Closed 5 years ago.
I need to match Column A and Column B values in Sheet 1 with Column A and Column B values in Sheet 2. If both are same then Copy C values from Sheet 2, and paste in Sheet 1 in C. I will enter values manually in sheet 2 Column C.Here each country will have 2 or more Number. So, both Column A and Column B must match.
I used the formula below. But not working. Most of the Column A and B values are not in order. Help me
=INDEX(Sheet2!$C:$C; MATCH(Sheet1!$A2:B2; Sheet2!$A:$B; 0);COLUMNS($A:B))
You can use the following formula to return what you're looking for. It is an array formula so will need to be entered with Ctrl+Shift+Enter
=INDEX(Sheet2!$C$2:$C$22; MATCH(1; (Sheet2!$A$2:$A$22=Sheet1!$A2)*(Sheet2!$B$2:$B$22=Sheet1!$B2);0))
As it is an array formula I recommend defining your ranges from beginning to end instead of just selecting the whole column. Non-array formulas Excel actively finds the beginning and end of the range and only calculates that subset; however, with array formulas it considers the whole range (even if there's nothing in it) so it can suddenly take a very long time even when there isn't much being calculated
Use the following as a matrix formula:
=INDEX(Sheet2!$C:$C; MATCH(Sheet1!$A2&$B2; Sheet2!$A&$B; 0))
Paste this into cell C2:
=INDEX(C2:C22,MATCH(G2&H2,A2:A22&B2:B22,0))
and use Ctrl+Shift+Enter instead of Enter since it's an array formula.
Then copy that cell as many rows down as needed.
Here are some more examples.
Related
I have got an Excel spreadsheet. This spreadsheet has just one tab in it. The Tab name is dynamic in nature and changes every week also the number of rows.
I have column A filtered already with a VBA macro. A1 has the header.
Now, I wanna find how many rows are there in this already filtered column A.
I am looking for any VBA function.
I have tried using Subtotal function.
=Subtotal(103,A2:A1345)
But I don't know the end range. As of now the end range is A1345. It will change every time in future if the new rows are added.
I tried multiple things but those did not work. I am quite new to VBA.
If A1 will never be blank, you could use (in a column other than A)
=Subtotal(103,A:A)-1.
Or, if there will be data below your table not to be counted, then format your table as a Table and use structured references (and this formula could go into column A)
=SUBTOTAL(103,Table1[column_header])
You can put the formula in column A if you use another column's last populated cell as the demarcation point.
If column B contains numbers then,
=subtotal(103, a2:index(a:a, match(1e99, b:b)))
If column B contains text then,
=subtotal(103, a2:index(a:a, match("zzz", b:b)))
Example file So I have two sheets that each have lists of part numbers, plant where they come from and two columns on costs. What I need to do is scan them and if Sheet A and Sheet B both have a row with matching part numbers and the plant they come from, then A's two cost values are updated to match B's costs.
The next step is then to highlight all cells in Sheet A that are not on Sheet B and highlight all cells in Sheet B that were copied to Sheet A. I think this last part can be done at the same time the cell is being copied I'm just not sure how to do any of this.
This is a formula method.
Because you will not be changing all the values and I assume you want to keep those that do not have a match, then in an empty column next to the figures on sheet 1 put the following formula:
=IFERROR(INDEX(Sheet2!F$3:F$7,MATCH(1,INDEX((Sheet2!$D$3:$D$7=$A3)*(Sheet2!$B$3:$B$7=$C3),),0)),G3)
Then copy over one column and down the the end of the data.
The INDEX((Sheet2!$D$3:$D$7=$A3)*(Sheet2!$B$3:$B$7=$C3),) will create an array of 0 and 1's the same size as the data reference on sheet 2. In this instance it will create a 1 dimensional array that is 5 objects.
The position of these objects of 0 and 1 are relative to the rows. So for the first formula the return array will be {0,1,0,0,0} because only the second row of the data matches both the plant and the part number.
The MATCH(1,INDEX(...),0) then finds the first object in that array that is 1 and returns the relative position, in this case 2 as it is the second in the array.
The Outer INDEX(Sheet2!F$3:F$7,...) then returns the value in the range Sheet2!F$3:F$7 whose relative position is equal to the 2 passed from the MATCH(). So Sheet2!F4.
If no MATCH is found then the whole thing will throw a #N/A error so we capture that error with IFERROR(...,G3) and tell the formula to return the value in column G instead.
This will give you all the proper values:
Then you can copy and paste just the values back to the original spots and hide the columns with the formulas:
Sheet2 for reference:
If you want vba to do the last part of copy and past and hiding then use the macro recorder and then clean up the code.
I am trying to figure out if there are any differences between a list of data with another. In order for a row of data to "match" with another row, the row must have the same values in their corresponding column. The rows themselves do not have to be in any particular order. In particular, I am dealing with a parts list, where there are part numbers, descriptions, etc. I am trying to figure out if any rows of data are different from rows of data from another list.
I found Compare two sheets using arrays, which may have the answer to my problem, but I am having trouble figuring out how to adapt to my code due to inexperience in Visual Basic.
I was able to get it to work for a single column of data, comparing one column of data from one sheet to another, but cannot get it to compare entire rows of data.
Here is an example of I want this to work:
Sheet 1 Sheet 2
Column 1 Column 2 Column 1 Column 2
Row 1 22a 33 11 11
Row 2 22a 33a 22a 33
Row 3 55 22b 55 23b
The code in the link will tell you what is not in sheet 1 but in sheet 2 and vice versa. In this example, I would like the code to tell me Sheet 1 Row 2 and Sheet 1 Row 3 are not in Sheet 2, and Sheet 2 Row 1 and Sheet 2 Row 3 are not in Sheet 1 (Sheet 1 Row 1 and Sheet 2 Row 2 match).
If that is ok by you, you can do it without VBA using the following formula:
={IF(IFERROR(MATCH(A1&"|"&B1;Sheet7!$A$1:$A$3&"|"&Sheet7!$B$1:$B$3;0);-1)=-1;"Unique";"")}
Assuming that each of your tables start in A1 (so that the tables with three entries span A1:B3), and entering this formula into C1 (and copying it down), press CTRL+SHIFT+ENTER when entering the formula to create an array formula, this will show the word "Unique" in column C if the pair in that row on that sheet is not in any of the row-pairs on sheet 2.
You can then use conditional formatting to highlight unique rows, filter on the tables to include only unique rows, or some other way of doing what you need.
NOTE 1: I have entered my numbers in Sheet6 and Sheet7 instead of 1 and 2. The formula written above goes into Sheet6.
NOTE 2: My language use ; instead of , as function separator, so if yours use , you need to change that.
NOTE 3: You will need to expand the ranges Sheet7!$A$1:$A$3 and Sheet7!$B$1:$B$3 if your set grows (this will happen automatically if new rows are inserted in between the old ones). The best is still probably to create named ranges for each of the 4 columns, exchange the references with those, and manage the named ranges instead of the formulas.
NOTE 4: If your data set contains the character "|", you need to change that as well, to match some character that you for sure do not have there.
Alternatively you could in column C on each cheet enter (assuming first entry in C1)
=A1&"|"&B1"
and copy this down, then run the solution from your copied example using that C column instead of on A1 and B1.
Given
O 1 2 3 A
A 4 5 6 B
B 7 8 9 D
O 3
C 15
T 18
I'm looking for VBA code to validate that when column A contains a value that the remaining columns also contain values and when it doesn't contain a value, that columns 2 & 5 also contain values but 3 & 4 don't.
I've simplified the example, in a real sheet there will be many more columns and rows to check.
I've considered COUNTIF and INDEX/MATCH and array forumlas but from my understanding these all work on single columns at a time.
I want to do something like WHEN A1:An<>"" THEN COUNTBLANK(B:E) ELSE COUNTA (C:D)
Is the best way to use autofilter using blanks in A and then countblank and then a second autofilter for values in A.
Thanks
You can do it with a couple of nested IF formulae as follows:
=IF(A1<>"",
"A not empty, "&IF(COUNTBLANK(B1:E1)=0,
"B:E not blank",
"B:E have blanks"),
"A blank, "&IF(AND(COUNTBLANK(B1)+COUNTBLANK(E1)=0,
COUNTBLANK(C1)+COUNTBLANK(D1)=2),
"Columns 2&5 have values and Columns 3&4 don't",
"but condition not met"))
The reason for going down the VBA route is that I want a generic reusable function as opposed to a formula I copy between cells and sheets changing the columns etc along the way ending up with a lot of duplicate code.
So something that takes a column to test and a value to test it with. Third parameter would be a range of columns to validate, and the fourth parameter the validation.
I don't want any solution to have the columns hard coded and I don't want intermediate totals at the end of rows. This is fairly easily achieved in Excel itself...
The reason for trying to use countblank is that I can apply it to a range.
After a lot of searching I discovered this (the columns don't match the original example)
=SUMPRODUCT((A2:A19<>"")*(B2:D19=""))
=SUMPRODUCT((A2:A19="")*(D2:D19=""))
=SUMPRODUCT((A2:A19="")*(B2:C19<>""))
Nice huh? I just need to convert it into VBA now.
Thanks
In both worksheets I have a key in column A. Not all of the key values are in both worksheets.
For each key value in column A of Worksheet 1, I want to find the corresponding key in worksheet 2 and move the data in column B of worksheet 2 into column B of worksheet 1.
I have never programmed a macro so I am completely lost for writing this code.
There is no need for VBA here, Philip.
Try this formula in cell B1 of Sheet1:
=IFERROR(vlookup(A1,Sheet2!A:B,2,false),"")
If you are on XL 2003, then do this:
=IF(ISERROR(vlookup(A1,Sheet2!A:B,2,false)),"",vlookup(A1,Sheet2!A:B,2,false))
Then drag this formula down for the rest of your data in Column A of Sheet1.
NB - Sheet2 is the assumed name of your Worksheet2, you may need to change to fit your needs.
NB2 - you can lookup vlookup in Excel Help (or online) to better understand what it does
Are you sure you need to use a macro for this? It sounds to me like you are using Excel and a simple VLOOKUP formula would do what you need.
A VLOOKUP looks like this: =VLOOKUP(A1,Sheet2!$A:$B,2,FALSE)
Where A1 is your reference cell (in this case you "key" in column A).
Sheet2!$A:$B is the lookup table (in this case columns A and B from the second sheet).
2 is the column number that you want data from, counting from the left (in this case the second column, column B)
FALSE tells the formula to only return values for exact matches. TRUE returns the closest match in the lookup table.