Using Rally APIKEY in a single sign on environment with a proxy throws error that it can not reach rally1.rallydev.com-
Tried setting HTTPS_PROXY As well, No result.
I can reach from browser and it auto signs me up via single signon.
Did anyone try apikey authorization in single sign on proxy environment using pyral, if so can u please share how u did it?—-thank you
Having as similar issue:
rally = Rally(server=server, apikey=apikey, workspace=workspace, project=project)
pyral.context.RallyRESTAPIError: SSL certificate verification failed
my organization is not ready to give the proxy server details any other work around for the issue.
sorry was not able to add a comment so posting as answer.
Related
Currently I'm trying to access data from my shopify store through local host and I'm getting the CORS error. I realize this question has been asked but I couldn't find an answer. Also I realize that this is a bad practice since credentials are exposed. I have a local computer that for a reason (with out taking the time to explain it) needs to be able to GET data from my shopify store. This HAS to be done in javascript so I am using XMLHttpRequest like so:
var url = "https://apikey:secretkey#mystore.myshopify.com/admin/orders.json?limit=25&page=2";
this is based on this answer on SO: shopify how to get product data using php in my localhost
In the above I'm passing my apikey and secret key from an app I've setup and approved on my account. One thing I didn't do is whitelist my ip which I'm not sure if that's what would allow me to get the data. This returns a CORS error.
I've also tried this:
var url = "https://username:password#mystore.myshopify.com/admin/orders.json?limit=25&page=2";
Here I pass my username and password and I get the CORS error also.
What is a challenge is that if I'm logged into the account or not logged in when I go to my browser window I can go to this url: "https://username:password#mystore.myshopify.com/admin/orders.json?limit=25&page=2"; and the json data appears in my browser window.
Again this has to be done in javascript and it has to be done from a local computer.
The way I went about this is forget the XMLHttpRequest. To access the shopify api via my local host I used the node library provided here: https://www.npmjs.com/package/shopify-api-node
I'm marking this as the answer just in case someone in the future is attempting to do this.
I'm having trouble with Adobe Sign's OAuth authentication -- every time I try to get my access token with my Client ID and redirect URI, I get this message:
Unable to authorize access because the client configuration is invalid: invalid_request
This is the request that I have been making (with the proper substitution for REDIRECT and CLIENTID):
https://secure.echosign.com/public/oauth? redirect_uri=REDIRECT& response_type=code& client_id=CLIENTID& scope=user_login:self+agreement_send:account
I am fairly new to OAuth and don't understand what I'm doing wrong. Could someone please explain the issues that could result in this error message?
I was having the same problem. I solved it by including the correct shard in the URL after "secure." and before ".echosign". You identify your shard by looking at the URL where you created your application.
I found this information here.
Hope this helps.
Is OK to have spaces in that https request?
If you still have a problems with this.
I think your URL is not correct.
I using this one
https://secure.na2.echosign.com/public/embeddedWidget
for adobe widget.
Adobe require same url for OAuth
https://secure.na2.echosign.com/public/oauth
Check your domain, and try. You can create widget just to see your domain
This comment might get helpful for others who are facing issue in Adobe Sign access token invalid_request.
Developer Guide on Sign API: https://opensource.adobe.com/acrobat-sign/developer_guide/index.html
For the Outh process and the link to be used in user's browser:
https://secure.na1.adobesign.com/public/oauth/v2?redirect_uri=https://www.google.co.in&response_type=code&client_id=paste_your_client_id_here&scope=user_read:account
If any one using sandbox,
https://secure.na1.adobesignsandbox.com//public/oauth/v2?redirect_uri=https://www.google.co.in&response_type=code&client_id=paste_your_client_id_here&scope=user_read:account
Please ensure the correct environment identifier and shard. https://helpx.adobe.com/sign/using/identify-account-shard.html
https://helpx.adobe.com/sign/kb/unable-to-authorize-access-because-the-client-configuration-is-invalid-invalid-request-while-running-oauth-process.html
After pasting URL in browser and allowing the access to your API and getting code. Please use endpoint URL to get access token as below:
for developer account: https://api.na1.adobesign.com/oauth/v2/token
for sandbox account: https://api.na1.adobesignsandbox.com/oauth/v2/token
I configure the Server in IntelliJ like this:
Name: xsonar
Server URL: https://sonar.xyz.com/
Organization:
Auth Type: Token
Token: my-on-sonar-created-token
Not using proxy
It says for the test connection:
Error testing connection: Not authorized. Please check server credentials.
However, if I use identical configuration but with my sonar login and password it works perfectly.
The documentation doesn't say anything about this: http://www.sonarlint.org/intellij/
And I didn't find similar issues.
The version of my SonarQube is 6.2.
How dangerous is it to use password and username instead of token?
We had a reversed proxy sitting in between which wouldn't let the request through using our normal proxy. So far I haven't found a good solution to work around the reversed proxy.
I have been trying to resolve this for some time now. I tried googling for this problem but didn't manage to find anything. All the questions I found were about replaying already recorded HTTPS requests.
So, I need to record HTTPS requests on a site protected with simple authentication (the pop-up window asking for username and password).
And this is where I get stuck. I enter correct login details and confirm it, nothing happens and in a second i get prompted to enter login details again, no error message nothing. When I press ESC I get 401 UNAUTHORIZED error.
Basically the site is acting as if the login details were incorrect when in fact I tried the same login details without Jmeter's proxy and the server accepted it.
What I tried:
1) Logging into this site without JMeter's proxy - works without problem
2) Recording different HTTPS site with JMeter's proxy - I tried my email and that works correctly as well
I should also mention that I am behind a company proxy, but I tried it at home and the result was same.
As for JMeter configuration, I am using everything on default having:
Thread Group
HTTP Cache Manager
HTTP Cookie Manager
HTTP Request Defaults
Recording Controller
HTTP(S) Test Script Recorder
Guessing the Thread Group doesn't really matter since I don't run any tests, only recording.
Additional Details:
Server:IIS
Logging into sharepoint website
EDIT:
Forgot to mention I tried already Blazemeter Extension, but when i try to record the logging session, it just freezes. Website hangs on trying to contact Blazemeter Cloud and Blazemeter plugin freezes, making it imposssible to stop recording and having to restart whole browser.
Also just noticed that when I am already logged in and try to access the site it records it without any issue. So it's only the login which is problematic for some reason.
JMeter removes cookies and authorization headers while recording.
You can use JMeter Chrome Extension as an alternate way of recording your test scenario.
In order to properly replay the recorded script you'll need to add HTTP Authorization Manager to it .
Sharepoint can have different authentication types, i.e.
Basic HTTP Authentication
Windows Integrated Authentication (NTLM)
Kerberos
See Windows Authentication with Apache JMeter guide to learn how to bypass each authentication challenge in your JMeter test.
So I was able to finally resolve this. The issue lied in sharepoint authentication. I was logged in a domain with my personal account, but was trying to access the sharepoint using a different account.
Sharepoint ignored the login details I was prompted to enter and used mw domain credentials instead. So the answer for me was to access the sharepoint website while being logged into domain(windows) with the same account.
I want to configure a custom port for the redirect URL in the Google Developer Console for the class of 'Installed Apps'.
Following the instructions in https://developers.google.com/accounts/docs/OAuth2InstalledApp , it turns out that this should be possible:
redirect_uri=http://localhost:9004&
Going to the Console ("console.developers.google.com"), "Credentials", and "Create New Client Id", I cannot find the field, where to enter a custom port number. Does anyone know how to do this?
Thanks!
In fact, The document you've read has answered you question:
When you create a client ID in the Google Developers Console, two redirect_uris are created for you: urn:ietf:wg:oauth:2.0:oob and http://localhost. The value your application uses determines how the authorization code is returned to your application.
http://localhost signals to the Google Authorization Server that the authorization code should be returned as a query string parameter to the web server on the client. You may specify a port number without changing the Google Developers Console configuration.
I tried this idea and it works.
Give consecutive ports or probable ports in credentials as
**Redirect URIs**
http://localhost:55738/YoutubeVideoList.aspx
http://localhost:8080/YoutubeVideoList.aspx
http://localhost:8081/YoutubeVideoList.aspx
http://localhost:8082/YoutubeVideoList.aspx
http://localhost:8083/YoutubeVideoList.aspx
http://localhost:8084/YoutubeVideoList.aspx
and don't forget to give correct redirectURI with port(anyone above) while calling the authentication process.