do you have any recent-installation-guide for installing SUMO on macOS Sierra (I have macBook 13'') that worked for you ?? (2017). I found several guides on the internet but I'am not sure what is the best solution. Would it be better to make a virtual machine with Ubuntu and install/run it on it? Please give me some hints and maybe experiences with installing SUMO on mac. Thanx :)
The preferred way is currently homebrew, see http://sumo.dlr.de/wiki/Installing/MacOS_Build_w_Homebrew.
You can also try
brew install homebrew/science/sumo
which may install a slightly outdated sumo.
This worked as of July 2018:
brew tap brewsci/science
brew install sumo
I also had to follow the advice in this issue comment to resolve an issue with libproj ("dyld: Library not loaded: /usr/local/opt/proj/lib/libproj.12.dylib"). It is not recommended but is extremely effective!
cd /usr/local/opt/proj/lib/
ln -s libproj.13.dylib libproj.12.dylib
Related
I have followed these steps while installing the gnome extension of chromium in Ubuntu 20.04.
Installed the GNOME Shell integration extension on chromium.
As per their documentation ran a command to install chrome-gnome-shell
sudo apt-get install chrome-gnome-shell
Still while loading the gnome-extensions page, it is showing error that "Although GNOME Shell integration extension is running, native host connector is not detected. Refer documentation for instructions about installing connector."
Can anyone tell me how to resolve this issue in steps?
FYI: starting from Ubuntu 21.10 Firefox comes as a default browser and as a snap, as well as Chromium. And has the same problem: GNOME Shell integration shows the same error.
Other ways to install the extensions are:
gnome-extensions install --force your_downloaded_extension.zip
unzip your_downloaded_extension.zip ~/.local/share/gnome-shell/extensions/
Probably this is because you are running Chromium as a Snap. There is an open bug in Launchpad about this, that appears to still be happening in Ubuntu 20.04 (still happening in Ubuntu 22.04):
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1741074
The easiest solution would probably be to use another web browser, not in a Snap.
I experienced this issue when upgrading from Ubuntu 21.04 to Ubuntu 22.04 (Jammy Jellyfish), where Firefox was installed via snap - supposedly the sandboxing made it unable to detect.
My resolution (which brought back gnome extensions connector being seen) was to install firefox manually by debian package via the directions in https://balintreczey.hu/blog/firefox-on-ubuntu-22-04-from-deb-not-from-snap/ . You may also be able to install the direct tarball following directions in https://fostips.com/install-latest-firefox-non-esr-debian/
Another option is to use a native extension manager as suggested in https://haydenjames.io/ubuntu-22-04-install-gnome-extensions-manager-workaround/
I solved using Chrome and not more Firefox for extensions.gnome.
(I use Chrome just for manage this extension)
If you still got problems, you could simply do this:
sudo apt-get reinstall chrome-gnome-shell
For me it did work after all, but just by using another browser - Firefox
I'm using Ubuntu 20.10 and I also had this issue. I was using Chromium but I found that Chromium dropped support for this, therefore I installed Firefox from the software. This did not work either.
The fix was to uninstall Firefox from software and install Firefox from ubuntu software with the source: ubuntu-groovy-updates-main
I installed the browser extension on there and it worked perfectly.
Aevin J He gave the answer if you're on ubuntu 21.10. it really matters whom you install it from. don't use the default one, use the one with most reviews
I tried to install mono and monodevelop on centOS 6.3.
After many hours I was able to install mono but failed with monodevelop.
I'm really astonished how difficult and time consuming it is, to get a recent mono/monodevelop version on linux installed.
Is there nobody willing to write and maintain an install/compile tutorial to get the most recent mono/monodevelop/monodata/ASP.NET MVC/... version on the major linux distributions (Centos, Ubuntu, Suse, Debian) installed?
I think many people developing on Windows (with limited linux knowledge) would like to start using mono, if the boarding hurdle would be somehow lower.
It may be the most important to make Mono more used and more visible.
Please, write a tested tutorial (script) for compiling mono/monodevelop.
Thank you!
I have created a project on Open Build Service, which produces builds of the latest MonoDevelop 4.0.10 for Debian, Ubuntu, CentOS, and Fedora.
see https://build.opensuse.org/project/show/home:tpokorra:mono
For installation instructions with apt-get or yum, see:
http://software.opensuse.org/download/package?project=home:tpokorra:mono&package=monodevelop-opt
I hope this will increase the usage of MonoDevelop on Linux Desktop environments.
Monodevelop 4.
If you use any *buntu. Check this.
"You can open up the terminal and install it via the following:
1. sudo add-apt-repository ppa:keks9n/monodevelop-latest
2. sudo apt-get update
3. sudo apt-get install monodevelop-latest"
http://mono-d.alexanderbothe.com/?p=101
Xamarin should be doing a better job at publishing the linux packages in a one-click manner. I don't care what linux distro (SuSE, RHEL, CentOS, Ubuntu etc) - just pick any one as the supported one and publish for it. It seemed that it used to be SuSE but even that has old packages as seen within Zypper/YaST.
Update Mono framework
Having said that, to update the Mono framework itself, without letting go of the package managers try this. This will work as long as the project dutifully publishes the RPMs. You don't want to build from source since it's a more fickle process and the setup distracts from your real objective (i.e. develop).
Obviously, please replace the URL below to what will be latest by the time you're reading this.
mkdir mono-rpms
cd mono-rpms
wget --reject "index.html*" -nd -r -e robots=off --no-parent http://download.mono-project.com/archive/3.2.3/linux/x64/
sudo zypper install *rpm
Update MonoDevelop (the IDE)
Timotheus Pokorra's answer indicates he's filling in some of the usability void left by Xamarin (Thanks Timotheus!!). You can install MonoDevelop via
http://software.opensuse.org/download/package?project=home:tpokorra:mono&package=monodevelop-opt
Note that on SuSE I get the error
Problem: nothing provides liberation-mono-fonts needed by mono-libgdiplus-opt-3.0.12-7.1.x86_64
Solution 1: do not install monodevelop-opt-4.0.12-5.2.x86_64
Solution 2: break mono-libgdiplus-opt-3.0.12-7.1.x86_64 by ignoring some of its dependencies
I (very reluctantly) selected to break the dependency. Note that I already had liberation-fonts (via sudo zypper install liberation-fonts). I don't know if its the same/different as liberation-mono-fonts. Anyway, hope Timotheus fixes it when he has a moment.
I'm not sure if you've already seen this, but this may help:
http://www.mono-project.com/Parallel_Mono_Environments
The most common problem that new developers have when coming to Linux from systems like Windows is not properly setting up their environment variables and so when they do the standard ./configure && make && make install routine, when it involves a number of source packages (like Mono does), any package that depends on the core package won't pick up the correct location for that base package.
Your question really doesn't explain what parts you found confusing or difficult so it's hard to address those issues.
For people unfamiliar with setting up Linux systems, it may be easier if you just go with a system like Ubuntu which has fairly recent pre-built packages (although not the latest - I don't think any Linux system keeps up with Mono releases) rather than wrestling with the learning curve of how to build everything yourself.
It is confirmed that in the near future Xamarin will support Linux and provide binaries (mono and mainline applications) for Debian and Centos derivatives, and their are already packages for Debian and Centos derivatives for technical preview. So cheers and no more pain of compiling and even parallel mono installaions.It can not get more easy than this. Check here
I have a Kinect for Windows and I would like to connect it to my Mac laptop with OSX 10.7.5.
I would like to use openNI as the driver.
OpenNI's website lists "OpenNI 2.1 Beta (OS X)" however the source-code page does not list install instructions. Are they found someplace else?
There are install instructions on the OpenNI 1.x github page and on OpenNI 1.x Unstable branch page. The instructions for the two branches are slightly different, however neither have worked for me.
I originally had XCode 4.6 installed. Both instructions state they want XCode 4.3.2, which I installed, renamed XCode 4.6 and used "sudo xcode-select -switch" to switch between them.
Both instructions ask for "libusb-devel +universal" and in both cases I get:
Error: Please do not install this port since it has been replaced by 'libusb'.
Error: org.macports.configure for port libusb-devel returned:
Please see the log file for port libusb-devel for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_libusb-devel/libusb-devel/main.log
Error: Processing of port libusb-devel failed
If I continue with the installation of "libusb +universal" instead, then the rest of the dependencies install fine (though I had to install GraphViz before Doxygen).
But then when I run: "./RedistMaker" I get a lot of warnings, though it does create a Final file. "sudo ./install.sh" runs fine and I'm guessing OpenNI is installed, but then I get a bunch more errors when trying to install Sensor.
Can anyone help tell where along the way should I have started to worry? Do I need to manually install libusb (which I have tried to do)?
Any help appreciated!
I fixed the installation of OpenNI by running these instructions:
> sudo rm -f /opt/local/lib/libusb-1.0.0.dylib
> sudo port clean libusb
> sudo port install libusb +universal
Basically the Mac install instructions need to be updated and should include a warning that the short install may leave files around that will need to be deleted before installing with port.
Studying vision, I would like to play with the Microsoft Kinect.
Can I use it on my Mac?
I have not found any Library for Mac and fear virtualization on my laptop to use Linux.
I've accessed Kinect data on OSX using openframeworks and the ofxKinect addon (which uses libfreenect and libusb).
It's not the only option, just I've used and worked 'out of the box'.
Try downloading the Zigfu Dev Bundle for mac (http://www.zigfu.com) - that should get you up to speed with kinect development on mac.
Using Kinect on Mac is as easy as ordering Latte.
But there is also a lot of confusion on the Internet and sites that seem to be old and give you the wrong advice such as installing a separate sensor library in addition to OpenNI. Just go to the basic website and download SDK for your MAC:
http://www.openni.org/openni-sdk/
You might need to have prerequsities though I assume you have already installed them, such as:
sudo port install libtool
sudo port install doxygen
restart comp
sudo port install libusb-devel +universal
Troubleshooting:
"sudo rm -f /opt/local/lib/libusb-1.0.0.dylib"
"sudo port clean libusb"
"sudo port install libusb +universal"
No need to compile anything. You should be able to run ./Samples/Bin/SimpleViewer right away after you run sudo ./install.sh.The PROBLEM might be that you have already tried to run it unsuccessfully and put a camera in the wrong state. I have seen errors such as USB intercase cannot be set etc. as a side effect.
Running your code in Eclipse is a different story and may require a few extra steps and changing your Ubuntu code (using openni namespace, different includes, etc.)
Trying to move my development environment to Linux. And new to Curl. Can't get it to install the IDE & RTE packages on an AMD HP PC running Ubuntu x64. I tried to install the Debian package via the package installer and get "Error: Wrong architecture - i386". Tried using the --force-architecture switch but it errors out.
I'm assuming Curl IDE will just run under Intel processors? Anyone have any luck with this issue and can advise?
It's been a while since I ran linux, but try looking for the x64 version. There are also x64 to x86 compatibility libraries available that should make 32 bit programs work for most situations.
The ubuntu forums are a much better place for this question, however.