We've migrated from Nexus 3.01.01 to 3.5.1-02. In the process we had to migrate internally published npms. One of those is the kendo-ui (commercial one) from Telerik/Progress. We have downloaded the licensed copy from Telerik and publishing it to our local nexus for consumption by our developers.
However the publishing fails with an error during payload parsing. I can publish the same tar without an issue to the older (3.01.01) nexus, so the tar/payload it self is OK.
The error seem to be at the point of trying to parse the npm payload. I can also publish a demo/simple npm (both scoped and non-scoped) without an issue. Spend the whole day trying to figure this out with no luck - appreciate any pointers or advice.
2017-09-06 18:49:09,160+0800 WARN [qtp762281666-4116] MIDALLE
org.sonatype.nexus.repository.httpbridge.internal.ViewServlet -
Failure servicing: PUT /repository/npm-hosted/#progress%2fkendo-ui
java.lang.IllegalStateException: Unexpected token VALUE_NULL at
[Source: java.io.InputStreamReader#1ebad5c7; line: 1, column: 896] at
com.sonatype.nexus.repository.npm.internal.NpmPublishParser.parseValue(NpmPublishParser.java:150)
at
com.sonatype.nexus.repository.npm.internal.NpmPublishParser.parseObject(NpmPublishParser.java:174)
at
com.sonatype.nexus.repository.npm.internal.NpmPublishParser.parseValue(NpmPublishParser.java:136)
at
com.sonatype.nexus.repository.npm.internal.NpmPublishParser.parseObject(NpmPublishParser.java:174)
at
com.sonatype.nexus.repository.npm.internal.NpmPublishParser.parseValue(NpmPublishParser.java:136)
at
com.sonatype.nexus.repository.npm.internal.NpmPublishParser.parsePackageRoot(NpmPublishParser.java:123)
at
com.sonatype.nexus.repository.npm.internal.NpmPublishParser.parse(NpmPublishParser.java:98)
at
com.sonatype.nexus.repository.npm.internal.NpmRequestParser.parseNpmPublish(NpmRequestParser.java:81)
at
com.sonatype.nexus.repository.npm.internal.NpmRequestParser.parsePublish(NpmRequestParser.java:60)
at
com.sonatype.nexus.repository.npm.internal.NpmHostedFacetImpl.putPackage(NpmHostedFacetImpl.java:85)
at
com.sonatype.nexus.repository.npm.internal.NpmHandlers$3.handle(NpmHandlers.java:172)
at
org.sonatype.nexus.repository.view.Context.proceed(Context.java:80)
Here's the gist for the full error from the nexus log.
This issue was resolved in scope of https://issues.sonatype.org/browse/NEXUS-14385
Fix Version/s:
3.6.1
There was a problem with parsing null values in package.json
I got this to work however I'm still trying to figure out the impact of the change. Please be cautious if you apply the same 'hack' to get this to work. I had to do this, because there was several other project teams that was getting affected.
In a nutshell I had to strip out few keys from the package.json of the kendo-ui package. My analysis is that these settings makes npm issue a network call that fails in our constraint environment.
The package.json keys that I removed are as follows.
First section
"_resolved": "https://registry.npm.telerik.com/#progress%2fkendo-ui/-/kendo-ui-2017.2.621.tgz",
"_shasum": "09a652ead21700716dd5a50f9e86e9bffcea640e",
"_shrinkwrap": null,
Second section
"dist": {
"shasum": "09a652ead21700716dd5a50f9e86e9bffcea640e",
"tarball": "http://registry.npm.telerik.com/#progress%2fkendo-ui/-/kendo-ui-2017.2.621.tgz"
},
I'd really appreciate if someone who know more about npm and npm definitions can inform the purpose of these settings in the package.json and potential impacts of removing them.
Related
the problem
npm init -y
npm i path electron request http
npx electron-packager . --arch=ia32 --platform=win32 --out=release --electron-version=13.1.9
to build an electron project found in the current directory. Previous to reformatting my OS, I never had issues with this. However, now every time I execute these commands, after the last one electron-packager.
the error
In the console, I see Unsupported GLOBAL_AGENT.HTTP_PROXY configuration value: URL protocol must be "http:"
I cannot find any help on Google, or Stackoverflow about why this is occurring.
what i tried
I tried commenting out all parts of code in my relatively small project, to try to figure out what is giving me this issue.
I also tried repackaging the same project on my MacOS & Windows 10/11 machines, nothing works.
I am really frustrated/confused as to why this is happening, especially since I was able to use electron-packager a while back on the exact same project with no issues.
project dependencies
http#0.0.1-security
electron#17.1.2
request#2.88.2
path#0.12.7
Actually this is a bug, has been fixed 5 hours ago (Mar 14, 2022, 9:55 PM GMT)
GLOBAL_AGENT.HTTP_PROXY configuration value: URL protocol must be http
Just do:
npm update
I've created a new site using Gridsome deployed with Netlify, but I can't get the site to appear when accessed. Instead, Netlify says:
Page Not Found
Looks like you've followed a broken link or entered a URL that doesn't exist on this site.
< Back to our site
I tried updating my build settings based on the instructions of the creator of the Gridsome starter template I'm using, but the site still doesn't display. I've also updated the js-yaml version.
I've gone through the questions/answers for similar questions on here, but I haven't been able to figure this out. I'm new to web development, and I'm sure I'm missing one or more things contributing to the issue.
My GitHub repo for this site.
The site.
I have the build log from Netlify. There are some errors in it. I don't want to put too much here, so here's a part from the end of the log.
12:18:36 PM: failed during stage 'building site': Build script returned non-zero exit code: 1
12:18:36 PM: Error running command: Build script returned non-zero exit code: 1
12:18:36 PM: Failing build: Failed to build site
12:18:36 PM: Finished processing build request in 55.729813394s
A Gist for the whole build log.
Thanks so much for your help, #talves!
I was having trouble using the build commands because of being new to cli stuff and a permissions issue. I asked a friend about the build errors I was getting from Netlify, and he recommended I try removing and re-installing my node modules. Did that, still didn't work. I tried removing anything in the repo having to do with "journal" since Failed to render /journal kept appearing in the build log, but that didn't work either.
I googled ReferenceError: _objectSpread is not defined after update since that was in the build log after the journal error. I found a comment on an issue noting the same error message in the main Babel GitHub repo that suggested adding the following to the package.json file:
"resolutions": {
"#babel/core": "^7.5.4"
}
I added it, tried to build again, and it still failed but only gave me one error message it didn't show before—Error: SyntaxError: Unexpected string in JSON at position. I googled that message and got another issue on GitHub. A comment on the issue noted a missing comma.
I went back to my package.json file and found that I didn't add a comma to the bracket above the new "resolutions" snippet. I added the comma, tried to build again, and it worked 🤜💥✨ !
Sorry if this is long-winded! I thought it might be good to include my process on figuring this out in case others run into the same issues.
I am trying to create a new stenciljs project using command npm init stencil. As soon as I choose a set up (whether app or component) and hit 'enter', a read ECONNRESET error is prompted.
I have tried updating the npm but nothing is working.
I expect the command prompt to show me the option where I can enter the project name after choosing a setup for my project but it throws an error, instead.
An ECONNRESET in npm means that npm is unable to connect to an URL where it's looking for dependencies or resources. In most cases, that means that your npm is unable to connect to the NPM Registry. But in your case it seems different.
You're trying to create a Stencil app, with npm init stencil. Under the hood, that That means you're using npm to download the create-stencil package and run it to generate the scaffold of your Stencil app.
The first part, getting the create-stencil package works well, the problem arrives while running the package. If I am correct, create-stencil tries to clone the stencil-app-starter GitHub repository and modify it. So maybe you're behind a corporate or university proxy, blocking GitHub, or another the URLs of the create-stencil resources, maybe the connection is rather flacky, maybe GitHub was done at that moment...
So I've been working on a Vue.js project for couple times now, and I am facing a problem I've never seen before.
Trying to git pull the project on another computer, or even downloading the project as a zip file, when it's time to npm install, vue-material module fails and the whole thing cannot be run.
It goes this way, with vie-material :
vue-material#1.0.0 postinstall C:\<my_things>\node_modules\vue-material
sh build/git-hooks/install.sh
Then I see this :
/usr/bin/bash: build/git-hooks/install.sh: No such file or directory
Then the modules' tree shows in the terminal, and at the end, I can see all the errors related to vue-material, with this statement :
Tell the author that this fails on your system:
sh build/git-hooks/install.sh
By the way, I tried to crate a brand new Vue project, and tried to add vue-material inside, no problem, so it has to do with my project.
Obviously though, /usr/bin/bash does not exist, since I'm running Windows 10.
Any knowledge on npm's installing routine ? I'm out of solution to try...
Can you share your package.json file?
I had this same problem just now and found that NPM could possibly be installing the incorrect version. Where I had "^vue-material": "1.0.0-beta-7" NPM was installing version 1.0.0 instead of 1.0.0-beta-7. If you remove the ^ then it may work for you. This is where I found the answer that helped me.
https://github.com/vuematerial/vue-material/issues/1155
Well, after couple times figuring out what was wrong, I got this :
I tried to use yarn and it told me that my node version was too old (vue-material needed 7.0+ and my node was 6.9, or at least that is what yarn told me), so I got myself the 8.9.3 node.
After this I tried to use yarn again, and the error with that bash script showed again.... then I just tried to use npm install again, and it worked just fine...
I don't know about the bash script thing, but one thing to remember is to always check for node and npm's version when errors happend.... (and yarn looks very cool and simple imo ^^).
You kinda made me think about a version problem though, I got you that ! :D
Problem solved....
I've googled many sites but cannot found a tutorial that actually works for react-native + flow type.
There was flow installation guide from react-native#0.22 document, but it's gone in react-native#0.46.
However, it comes up again in Running Tests and Contributing, I tested to run npm run flow but not working, and yet it doesn't say how to make it works. It's possibly been a missing part inside of react-native documentation.
What I need is to run flow correctly with react-native. Auto-check flow every time I reload the page with ⌘R would be the best.
I just finished covering half of our project by flow and we use RN 0.44.0.
The tricky part is: do you also want to know errors inside node_modules, someone says those errors are helpful.
Anyway, I disable the error in node_modules, and here is my .flowconfig:
[ignore]
<PROJECT_ROOT>/node_modules/.*
<PROJECT_ROOT>/flowLibs.js
.....
[include]
[libs]
./flowLibs.js
.....
[lints]
[options]
You should install flow first if you not setup correctly,
npm install --save-dev flow-bin
and also run this in you project root after install:
npm run flow init
If npm run flow init does not work, just add "flow": "flow" in npm scripts.
After init, put my .flowconfig in your project .flowconfig file.
Then create a js file flowLibs.js and if npm run flow check cause your any error like Module_Name. Required module not found
Write down code in flowLibs.js:
declare module 'Module_Name' { declare var exports: any; };
After that, you should be good to go with you project now.
BTW, don't forget add //#flow on the top of the file which you want to check type.
I found flowtype is built in with react-native#0.46+.
For react-native document, I think they should at least tell flowtype is already built in. And for the rest document ex: Testing Your Changes#flow, it won't work without flow-bin, they should mention that too.
To make flowtype of best use, I use it with Visual Studio Code.
Steps:
Install flow-bin globally, by npm i flow-bin -g.
Make sure your terminal is responsive to command flow.
Install vscode flow extension.
Set vscode workspace preference with "javascript.validate.enable": false, to disable default javascript validation, so flow validation can take place.
To access vscode preference, ALT+F,P,S for windows, ⌘+, for mac.
then you have flowtype installed with visual result with every key stroke:
Try this one:
Adding Flow to React Native
https://medium.com/react-native-training/getting-started-with-react-native-and-flow-d40f55746809
Hope this helps!