Sorry for the noob question. I just downloaded CAM::PDF along with Strawberry for Windows, and trying to do find/replace from the command line. Ran buidinstalldeps to get all needed prereqs.
I'm trying to run changepagestring.pl from command line. But idk how to reference the file location and have it put the output file for me in a specified location:
changepagestring.pl master-exch-manual.pdf "as shown in Figure" figure output.pdf
My goal is to replace "see above figure" with "figure" in this file. But it's in a different directory than the one I'm in, C:\Users\Me\Doc\CAM-PDF-1.60\
So how do I run and do all this from the command line. I've seen the help file with example, but I get this:
CAM::PDF from command shell with PL file not recognized
There are a few possible solutions. The easiest one from the directory you mentioned is:
perl -Ilib bin/changepagestring.pl ...
Alternatively, if you run the usual Perl install commands from that folder, then changepagestring.pl should be included in your usual path
perl Makefile.PL
make install
Alternatively^2, you can use the "cpan" tool to automate the download, build, test and install steps in one go:
cpan install CAM::PDF
Related
If I go to my PhpStorm\bin folder I can run the format.bat command to format files from the command line e.g.
phpstorm format -r C:\path\to\my\code -r -s c:\path\to\my\settings.xml
and that works great. However I cannot run the command if PhpStorm is open, I get an error:
Only one instance of PhpStorm can be run at a time
Not ideal to have to close my IDE or have to use a 3rd party code formatter. Is there any workaround? Without installing another copy of PhpStorm.
It's a known issue, please see: https://youtrack.jetbrains.com/issue/IDEA-160462
The link from y.bedrov led me to here https://confluence.jetbrains.com/display/IDEADEV/Command-Line+Source+Code+Formatter with a potential solution.
Unfortunately I don't seem to be able to get it to work, I had to resort to copying my PhpStorm directory and using the copy instead. But I add it here in hopes that it helps others
Running Command-Line Formatter when the IDE is Running
On Linux/MacOS
Go to /bin directory where is a directory where Intellij IDEA or Intellij IDEA-based product is installed.
Copy idea.properties to some other file, for example, format.properties
Modify format.properties as follows:
Uncomment the lines:
# idea.config.path=${user.home}/.IntelliJIdea/config
# idea.system.path=${user.home}/.IntelliJIdea/system
Change them to point to some directories which differ from defaults, for example:
idea.config.path=${user.home}/.IntelliJIdea/format/config
idea.system.path=${user.home}/.IntelliJIdea/format/system
Modify format.sh by adding the line with IDEA_PROPERTIES variable:
\#!/bin/sh
\# ------------------------------------------------------
\# IntelliJ IDEA formatting script.
\# ------------------------------------------------------
IDE_BIN_HOME="${0%/*}"
export IDEA_PROPERTIES=$IDE_BIN_HOME/format.properties
exec "$IDE_BIN_HOME/idea.sh" format "$#"
Run format.sh without closing the IDE, it should give the following output:
IntelliJ IDEA ..., build ... Formatter
Usage: format [-h] [-r|-R] [-s|-settings settingsPath] path1 path2...
-h|-help Show a help message and exit.
-s|-settings A path to Intellij IDEA code style settings .xml file.
-r|-R Scan directories recursively.
-m|-mask A comma-separated list of file masks.
path.. A path to a file or a directory.
On Windows
You have to create a separate format.properties file as described above for Linux/MacOS.
Change format.bat file by adding a line with IDEA_PROPERTIES variable as follows:
#ECHO OFF
::----------------------------------------------------------------------
:: IntelliJ IDEA formatting script.
::----------------------------------------------------------------------
SET IDE_BIN_DIR=%~dp0
SET IDEA_PROPERTIES=%IDE_BIN_DIR%\format.properties
CALL "%IDE_BIN_DIR%\idea.bat" format %*
Run format.bat, it will list the command-line formatter options.
This guide works for me. But ensure use PHPSTORM_PROPERTIES instead of IDEA_PROPERTIES when export environment variable as described in the article:
export IDEA_PROPERTIES=$IDE_BIN_HOME/format.properties
And what's more, from version 2022.1, IntelliJ IDEA supports dry run which is very useful for format validation based pre-commit git hook.
I have a .cmm file which helps in debugging of Qcomm chipsets.
This file has a line : cd ../../../../../modem_proc
When I run this same cmm file using T32 GUI, it runs fine and does the work. But when I am trying to run the same file using windows command line using,
C:\T32\bin\windows64>t32mqdsp6.exe -c C:\T32\config.t32 -s D:\path\to\xxx.cmm
Following error is thrown in T32: syntax error in B::cd ../../../../../modem_proc
What am I missing here? I have no hands-on experience with T32 what-so-ever.
The problem probably results from different working directories. Type
PRINT OS.PWD()
in the GUI and add it to the top of the script. I'd suspect they are different.
Don't use working directory relative paths, instead use paths relative to the script, e.g.
CD ~~~~/../../../../modem_proc
The four tilde (~) symbols mean "directory of the currently executed script". There's still a possible issue with this solution when using multiple GUIs and the intercom, but for most use-cases this should be OK.
When starting TRACE32 (up to build 99518) without option "-s", it starts a default script t32.cmm form your TRACE32 installation directory. But t32.cmm is not executed, when "-s" is used.
So probably your t32.cmm is changing your working directory. If so you can fix the issue by adding the line
DO ~~/t32.cmm
to the top of your script xxx.cmm.
See also https://www.lauterbach.com/frames.html?help_autostart.html
The default working path is also set by the TRACE32 configuration file. That is the file passed with "-c". So if your are using a different configuration file than C:\T32\config.t32 when starting your TRACE32 GUI the normal way, then you should use that configuration file also when starting TRACE32 from the command line.
To get the path of the configuration file usually used, start TRACE32, execute command AREAand then command PRINT OS.PCF()
Furthermore dev15 is probably right here https://stackoverflow.com/a/53671657/4727717:
Use paths relative to the PRACTICE script (cmm-file) by starting each path with four tildes.
I am getting started with Meteorjs. I'm a windows user so I downloaded the windows installer package Release 0.7.0.1-win2. I use gitbash for my command line interface and can't get it to recognize meteor. I get the error "sh.exe": meteor: command not found". It works fine in windows command line but I prefer gitbash.
How do I get meteor to work with gitbash?
I have the perfect answer for you since I literally just solved the issue myself.
First of all make sure meteor works in the default windows command prompt. Next open git bash and check if the following command works:
cmd //c meteor
This runs the command meteor as if you were in the command prompt.
Next step is to set up an alias in git bash so you don't have to type that out each time.
Open git bash and enter the following:
vim ~/.bashrc
this will open/create the bashrc file in VIM, press i to insert and type the following:
alias meteor="cmd //c meteor"
Save and exit vim by first pressing the Esc key then press the ":" key. Now you should be able to enter commands in VIM. Type "wq" and press enter which will write into your .bashrc file and exit vim.
Almost there! Now that you are back in git bash, all you need to do is point to your .bashrc file by entering the following:
source ~/.bashrc
Now you will be able to run meteor commands straight from git bash! Hope that helped!
Here's the fix:
The problem is because of .bat files not being handled properly by
MinGW
Go to this directory - C:\Users[your username]\AppData\Local\.meteor
You should see a meteor.bat file there. Create a new file called "meteor" (without any extension and ""). Open it with notepad and paste the following:
#!/bin/sh
cmd //c "$0.bat" "$#"
save the file and now run git bash. You should be able to use meteor command in git bash.
Details
To run a *.bat command from MinGW's MSYS shell, you must redirect the execution to cmd.exe, thus:
cmd //c foo.bat [args ...]
The foo.bat command file must be in a directory within $PATH, (or you must specify the full path name ... using slashes, not backslashes unless you use two of them for each path name separator). Also, note the double slash to inform cmd.exe that you are using its /C option, (since it doesn't accept the -c form preferred by the MSYS shell.
If you'd like to make the foo.bat file directly executable from the MSYS shell, you may create a two line Bourne shell wrapper script called simply foo alongside it, (in the same directory as foo.bat), thus:
#!/bin/sh
cmd //c "$0.bat" "$#"
(so in your case, you'd create script file meteor alongside meteor.bat).
In fact, since this wrapper script is entirely generic, provided your file system supports hard file links, (as NTFS does for files on one single disk partition), you may create one wrapper script, and link it to as many command file names as you have *.bat files you'd like to invoke in this manner; (hint: use the MSYS ln command to link the files).
Credits to: Keith Marshall on SO and rakibul on Meteor Forums
It shouldn't be too hard - you just need to make sure that the meteor.bat file is in your executable. Check with echo $PATH from the bash console if it is already there.
For me, the meteor 0.7.0.1-win installer appended meteor's folder to the path automatically. However, you can add it manually with:
export PATH=$PATH:/path/to/user/folder/AppData/Local/.meteor
(On CygWin my user folder is at /cygdrive/c/Users/adam - I'm not sure what the equivalent path would be on git bash).
If you like, append that line to your ~/.profile to make sure meteor gets added to the path when the console opens.
Finally, on Windows the executable file is meteor.bat. I made a symbolic link to the filename meteor, just so I wouldn't have to type the .bat:
cd /path/to/user/folder/AppData/Local/.meteor
ln -s meteor.bat meteor.
Please have a look at the issue https://github.com/sdarnell/meteor/issues/18
I would suggest maybe creating a trivial wrapper script or alias that invokes LaunchMeteor.exe with the original arguments.
After more research on google I see that there isn't an implemented way to do this yet. The guys at meteor are working on it and accepting pull requests if you have a solution. The conclusion I came to is to use Vagrant and virtualbox to set up a ubuntu vm for meteor development. You can find info at this site: http://win.meteor.com/ on how to install virtual machines and provision to work with meteor.
The only way I found out to execute my script with the Love2d framework is to zip all of it and then rename the zip to love. This kinds of take a lot of time for a small modification. Is there a faster way to do it? I tried to command line and I get this error
'love' is not recognized as an internal or external command,
operable program or batch file.
LÖVE also executes folders if they have the main.lua in them - you can just drag and drop the folder onto the application, or call it from the command line with the folder as the argument if you prefer.
LÖVE runs the contents of a folder if it can find a main.lua in it (Like Bill said).
[Note that it doesn't check subfolders].
There are three ways to run a love2D program, you can:
a) Drag the folder over the love.exe binary/link (This works in Win and *Nix, I don't know about OS X).
b) Navigate to the directory that is one level above the folder and type love [folder containing main.lua]
or
c) Zip it up and rename the .zip to a .love. Then double click the .love file
Option 'b' will fail if the binary is not in the %PATH%(Windows) or $PATH(*Nix) variable
(It will spout an error message like 'love' is not recognized as an internal or external command, operable program or batch file. on windows and bash: love: command not found on linux).
There are two ways to solve this:
(Both require ADMIN/root privileges, )
1) Add the love binary to the PATH variable. Here's how to do this in windows and in linux (In linux you want to do something like this: PATH=$PATH:$HOME/where/ever/you/put/love/)
2) You can add a link to the love2D binary in C:\WINDOWS\system32 or /usr/bin/.
In windows you create a shortcut to the love.exe (wherever you installed it to) and then drag it into C:\WINDOWS\system32. In linux you can run this:
sudo link /path/to/love/binary /usr/bin/love && sudo chmod ugo+rwx /usr/bin/love
I hope this helps!
Sources:
Google (the links above), Love2D and my knowledge :D
I found this to be very helpful when i started. Hope this helps
A Guide to Getting Started With Love2d
If you're using Mac OS, you should run using:
open -a love xxx.love
To recreate a file as .love, you can run in command line:
zip xxx.love file1.lua file2
If you just want to replace a file in .love:
zip -r xxx.love file1.lua
I think this will make your work easier.
simple way:
create folder /path/to/Game
put your files (main.lua, conf.lua, ...) in folder /path/to/Game
you can run script like this:
love /path/to/Game/
or if you use Linux, you can go in folder (cd /path/to/Game) and type just:
love .
(dot means that you want to run it form in folder
I found a simple solution for save time.
You have to create a file .bat with this simple command:
del Project.love
7z.exe a Project.zip ..\Project\*
ren Project.zip Project.love
For do this you need to download 7zip and insert this file (file.bat) into the folder of your project. Like this:
Good work!
If you're yousing Notepad++ to write your code, just open your main.lua file, then go to Run and add there this text including quotes:
"Path" "$(CURRENT_DIRECTORY)"
Where Path is a Full path to love.exe.
The save it to a key combination and now you can test your code by using this combination in any script at Notepad++.
If you use Sublime Text, you can make a build which runs your application.
https://love2d.org/wiki/Sublime_Text
While in Sublime Text press CMD + B or Ctrl + B
I'm trying to install a Yii application with the latest framework to date on wampserver2.2.
I edited the .bat file to match the directory of my php /bin folder and added this as a value to the path variable.
However I seem to be unable to run yiic from the commandline. Im trying this on a windows 7 professional OS but to no avail. If i fire up yiic.php it opens the file in a notepad window. If I try to run the .bat file, the cmdline returns that it can not open the input file c:\wamp\framework\yiic
What should I do to make yiic run from the commandline? I think I completed all the necessairy steps but could be easily overlooking something.
If someone could come up with an answer that would be great.
Two things:
Make sure you are running yiic.bat, and not just yiic (which is the Linux shell script). There are two files in the directory, and your error (can not open the input file c:\wamp\framework\yiic) looks like you are using just yiic, the Bash script.
As #schmunk mentioned in the comment on the question, you can just call yiic.php directly with the PHP CLI. That is what the yiic.bat script is doing for you. :)
C:\wamp\framework> php yiic.php webapp C:\wamp\htdocs\myproject
I answered a similar question here that covers the same stuff:
https://stackoverflow.com/a/3728454/164439