I have problem of a defined string
If I have in sources code
static const QStringList g_arrGenersControllerCommonLibDefinitions(QString(U_LIBS).split(";"));
How can I specify in cmake that he writes to a variable
like this
add_definitions(-DU_LIBS="${U_LIBS}")
How can I specify in cmake
The problem not in CMake only but also in gcc. When you pass definition through CMake it arrives to gcc without escaping. You can try make VERBOSE=1 to see it.
Here is a solution:
cmake_minimum_required (VERSION 2.8)
project (CMPD)
find_package (Qt5Core REQUIRED)
set (U_LIBS)
set (U_LIBS "${U_LIBS}/usr/lib/libu.so")
set (U_LIBS "${U_LIBS}\\\;/usr/lib/libu.so.0")
set (U_LIBS "${U_LIBS}\\\;/usr/lib/libu.so.0.0")
set (U_LIBS "${U_LIBS}\\\;/usr/lib/libu.so.0.0.0")
add_definitions(-DU_LIBS="${U_LIBS}")
add_executable (cmpd ${PROJECT_SOURCE_DIR}/main.cpp)
target_link_libraries (cmpd Qt5::Core)
Output:
("/usr/lib/libu.so", "/usr/lib/libu.so.0", "/usr/lib/libu.so.0.0", "/usr/lib/libu.so.0.0.0")
The sources are available here.
Related
I am using the arm-linux-androideabi-g++ compiler. When I try to compile a simple "Hello, World!" program it compiles fine. When I test it by adding a simple exception handling in that code it works too (after adding -fexceptions .. I guess it is disabled by default).
This is for an Android device, and I only want to use CMake, not ndk-build.
For example - first.cpp
#include <iostream>
using namespace std;
int main()
{
try
{
}
catch (...)
{
}
return 0;
}
./arm-linux-androideadi-g++ -o first-test first.cpp -fexceptions
It works with no problem...
The problem ... I am trying to compile the file with a CMake file.
I want to add the -fexceptions as a flag. I tried with
set (CMAKE_EXE_LINKER_FLAGS -fexceptions ) or set (CMAKE_EXE_LINKER_FLAGS "fexceptions" )
and
set ( CMAKE_C_FLAGS "fexceptions")
It still displays an error.
Note: Given CMake evolution since this was answer was written in 2012, most of the suggestions here are now outdated/deprecated and have better alternatives.
Suppose you want to add those flags (better to declare them in a constant):
SET(GCC_COVERAGE_COMPILE_FLAGS "-fprofile-arcs -ftest-coverage")
SET(GCC_COVERAGE_LINK_FLAGS "-lgcov")
There are several ways to add them:
The easiest one (not clean, but easy and convenient, and works only for compile flags, C & C++ at once):
add_definitions(${GCC_COVERAGE_COMPILE_FLAGS})
Appending to corresponding CMake variables:
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${GCC_COVERAGE_COMPILE_FLAGS}")
SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${GCC_COVERAGE_LINK_FLAGS}")
Using target properties, cf. doc CMake compile flag target property and need to know the target name.
get_target_property(TEMP ${THE_TARGET} COMPILE_FLAGS)
if(TEMP STREQUAL "TEMP-NOTFOUND")
SET(TEMP "") # Set to empty string
else()
SET(TEMP "${TEMP} ") # A space to cleanly separate from existing content
endif()
# Append our values
SET(TEMP "${TEMP}${GCC_COVERAGE_COMPILE_FLAGS}" )
set_target_properties(${THE_TARGET} PROPERTIES COMPILE_FLAGS ${TEMP} )
Right now I use method 2.
In newer versions of CMake you can set compiler and linker flags for a single target with target_compile_options and target_link_libraries respectively (yes, the latter sets linker options too):
target_compile_options(first-test PRIVATE -fexceptions)
The advantage of this method is that you can control propagation of options to other targets that depend on this one via PUBLIC and PRIVATE.
As of CMake 3.13 you can also use target_link_options to add linker options which makes the intent more clear.
Try setting the variable CMAKE_CXX_FLAGS instead of CMAKE_C_FLAGS:
set (CMAKE_CXX_FLAGS "-fexceptions")
The variable CMAKE_C_FLAGS only affects the C compiler, but you are compiling C++ code.
Adding the flag to CMAKE_EXE_LINKER_FLAGS is redundant.
The preferred way to specify toolchain-specific options is using CMake's toolchain facility. This ensures that there is a clean division between:
instructions on how to organise source files into targets -- expressed in CMakeLists.txt files, entirely toolchain-agnostic; and
details of how certain toolchains should be configured -- separated into CMake script files, extensible by future users of your project, scalable.
Ideally, there should be no compiler/linker flags in your CMakeLists.txt files -- even within if/endif blocks. And your program should build for the native platform with the default toolchain (e.g. GCC on GNU/Linux or MSVC on Windows) without any additional flags.
Steps to add a toolchain:
Create a file, e.g. arm-linux-androideadi-gcc.cmake with global toolchain settings:
set(CMAKE_CXX_COMPILER arm-linux-gnueabihf-g++)
set(CMAKE_CXX_FLAGS_INIT "-fexceptions")
(You can find an example Linux cross-compiling toolchain file here.)
When you want to generate a build system with this toolchain, specify the CMAKE_TOOLCHAIN_FILE parameter on the command line:
mkdir android-arm-build && cd android-arm-build
cmake -DCMAKE_TOOLCHAIN_FILE=$(pwd)/../arm-linux-androideadi-gcc.cmake ..
(Note: you cannot use a relative path.)
Build as normal:
cmake --build .
Toolchain files make cross-compilation easier, but they have other uses:
Hardened diagnostics for your unit tests.
set(CMAKE_CXX_FLAGS_INIT "-Werror -Wall -Wextra -Wpedantic")
Tricky-to-configure development tools.
# toolchain file for use with gcov
set(CMAKE_CXX_FLAGS_INIT "--coverage -fno-exceptions -g")
Enhanced safety checks.
# toolchain file for use with gdb
set(CMAKE_CXX_FLAGS_DEBUG_INIT "-fsanitize=address,undefined -fsanitize-undefined-trap-on-error")
set(CMAKE_EXE_LINKER_FLAGS_INIT "-fsanitize=address,undefined -static-libasan")
You can also add linker flags to a specific target using the LINK_FLAGS property:
set_property(TARGET ${target} APPEND_STRING PROPERTY LINK_FLAGS " ${flag}")
If you want to propagate this change to other targets, you can create a dummy target to link to.
This worked for me when I needed a precompile definition named "NO_DEBUG":
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++14 -DNO_DEBUG")
Then from code
#ifdef NO_DEBUG
.....
With CMake 3.4+, APPEND can be used with the string command to add flags.
string(APPEND CMAKE_EXE_LINKER_FLAGS " -fexceptions")
I am using the arm-linux-androideabi-g++ compiler. When I try to compile a simple "Hello, World!" program it compiles fine. When I test it by adding a simple exception handling in that code it works too (after adding -fexceptions .. I guess it is disabled by default).
This is for an Android device, and I only want to use CMake, not ndk-build.
For example - first.cpp
#include <iostream>
using namespace std;
int main()
{
try
{
}
catch (...)
{
}
return 0;
}
./arm-linux-androideadi-g++ -o first-test first.cpp -fexceptions
It works with no problem...
The problem ... I am trying to compile the file with a CMake file.
I want to add the -fexceptions as a flag. I tried with
set (CMAKE_EXE_LINKER_FLAGS -fexceptions ) or set (CMAKE_EXE_LINKER_FLAGS "fexceptions" )
and
set ( CMAKE_C_FLAGS "fexceptions")
It still displays an error.
Note: Given CMake evolution since this was answer was written in 2012, most of the suggestions here are now outdated/deprecated and have better alternatives.
Suppose you want to add those flags (better to declare them in a constant):
SET(GCC_COVERAGE_COMPILE_FLAGS "-fprofile-arcs -ftest-coverage")
SET(GCC_COVERAGE_LINK_FLAGS "-lgcov")
There are several ways to add them:
The easiest one (not clean, but easy and convenient, and works only for compile flags, C & C++ at once):
add_definitions(${GCC_COVERAGE_COMPILE_FLAGS})
Appending to corresponding CMake variables:
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${GCC_COVERAGE_COMPILE_FLAGS}")
SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${GCC_COVERAGE_LINK_FLAGS}")
Using target properties, cf. doc CMake compile flag target property and need to know the target name.
get_target_property(TEMP ${THE_TARGET} COMPILE_FLAGS)
if(TEMP STREQUAL "TEMP-NOTFOUND")
SET(TEMP "") # Set to empty string
else()
SET(TEMP "${TEMP} ") # A space to cleanly separate from existing content
endif()
# Append our values
SET(TEMP "${TEMP}${GCC_COVERAGE_COMPILE_FLAGS}" )
set_target_properties(${THE_TARGET} PROPERTIES COMPILE_FLAGS ${TEMP} )
Right now I use method 2.
In newer versions of CMake you can set compiler and linker flags for a single target with target_compile_options and target_link_libraries respectively (yes, the latter sets linker options too):
target_compile_options(first-test PRIVATE -fexceptions)
The advantage of this method is that you can control propagation of options to other targets that depend on this one via PUBLIC and PRIVATE.
As of CMake 3.13 you can also use target_link_options to add linker options which makes the intent more clear.
Try setting the variable CMAKE_CXX_FLAGS instead of CMAKE_C_FLAGS:
set (CMAKE_CXX_FLAGS "-fexceptions")
The variable CMAKE_C_FLAGS only affects the C compiler, but you are compiling C++ code.
Adding the flag to CMAKE_EXE_LINKER_FLAGS is redundant.
The preferred way to specify toolchain-specific options is using CMake's toolchain facility. This ensures that there is a clean division between:
instructions on how to organise source files into targets -- expressed in CMakeLists.txt files, entirely toolchain-agnostic; and
details of how certain toolchains should be configured -- separated into CMake script files, extensible by future users of your project, scalable.
Ideally, there should be no compiler/linker flags in your CMakeLists.txt files -- even within if/endif blocks. And your program should build for the native platform with the default toolchain (e.g. GCC on GNU/Linux or MSVC on Windows) without any additional flags.
Steps to add a toolchain:
Create a file, e.g. arm-linux-androideadi-gcc.cmake with global toolchain settings:
set(CMAKE_CXX_COMPILER arm-linux-gnueabihf-g++)
set(CMAKE_CXX_FLAGS_INIT "-fexceptions")
(You can find an example Linux cross-compiling toolchain file here.)
When you want to generate a build system with this toolchain, specify the CMAKE_TOOLCHAIN_FILE parameter on the command line:
mkdir android-arm-build && cd android-arm-build
cmake -DCMAKE_TOOLCHAIN_FILE=$(pwd)/../arm-linux-androideadi-gcc.cmake ..
(Note: you cannot use a relative path.)
Build as normal:
cmake --build .
Toolchain files make cross-compilation easier, but they have other uses:
Hardened diagnostics for your unit tests.
set(CMAKE_CXX_FLAGS_INIT "-Werror -Wall -Wextra -Wpedantic")
Tricky-to-configure development tools.
# toolchain file for use with gcov
set(CMAKE_CXX_FLAGS_INIT "--coverage -fno-exceptions -g")
Enhanced safety checks.
# toolchain file for use with gdb
set(CMAKE_CXX_FLAGS_DEBUG_INIT "-fsanitize=address,undefined -fsanitize-undefined-trap-on-error")
set(CMAKE_EXE_LINKER_FLAGS_INIT "-fsanitize=address,undefined -static-libasan")
You can also add linker flags to a specific target using the LINK_FLAGS property:
set_property(TARGET ${target} APPEND_STRING PROPERTY LINK_FLAGS " ${flag}")
If you want to propagate this change to other targets, you can create a dummy target to link to.
This worked for me when I needed a precompile definition named "NO_DEBUG":
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++14 -DNO_DEBUG")
Then from code
#ifdef NO_DEBUG
.....
With CMake 3.4+, APPEND can be used with the string command to add flags.
string(APPEND CMAKE_EXE_LINKER_FLAGS " -fexceptions")
I am implementing CMake in my code but I'm getting the error
"Cannot specify link libraries for target "Qt5::Widgets" which is not built by the project".
Below are the contents of the CMakeLists.txt:
#Specify the version being used aswell as the language
cmake_minimum_required(VERSION 2.6)
#Name your project here
project(eCAD)
#Sends the -std=c++11 flag to the gcc compiler
ADD_DEFINITIONS(-std=c++11)
#This tells CMake to main.cpp and name it eCAD
add_executable(eCAD main.cpp)
#include the subdirectory containing our libs
add_subdirectory (gui)
include_directories(gui)
#include Qt directories
find_package(Qt5Widgets)
find_package(Qt5Core)
find_package(Qt5Designer)
SET(QT_USE_QTDESIGNER ON)
#link_libraries
target_link_libraries(Qt5::Widgets Qt5::Core)
In addition to the accepted answer: An important detail is to place target_link_libraries after the add_executable and find_package lines, so all linked components are known.
The first argument of target_link_libraries is the target name:
target_link_libraries(eCAD Qt5::Widgets Qt5::Core)
Also, do not confuse target name with the project name:
a command project specifies a project name, but
a target is the one created with add_executable, add_library or add_custom_target.
The error message is about the target.
Set you_lib_name before setting target_link_libraries
set(you_lib_name libname)
target_link_libraries(you_lib_name Qt5::Widgets Qt5::Core)
I am using CMake 2.8.7 on a Linux machine with Intel 11.0 compilers. I am trying to use CMake for the first time as I would like to build this project on both Windows and Linux machines.
I though of using a simple approach first and used a standard Hello World example:
My src/HelloWorld.f90:
!Test helloworld in Fortran using Cmake
program hello
print *, "Hello World!"
end program hello
My main CMakeLists.txt:
# States that CMake required version must be greater than 2.8.7
cmake_minimum_required(VERSION 2.8.7)
enable_language (Fortran)
project(helloworld Fortran)
add_subdirectory(src)
SET_TARGET_PROPERTIES(helloworld PROPERTIES LINKER_LANGUAGE FORTRAN)
My src/CMakeLists.txt:
cmake_minimum_required(VERSION 2.8.7)
# Include the directory itself as a path to include directories
set(CMAKE_INCLUDE_CURRENT_DIR ON)
# For a large number of source files you can create it in a simpler way
# using file() function:
file(GLOB helloworld_SOURCES *.f90)
I still get an error which says CMAKE_FORTRAN_LINK_EXECUTABLE variable missing. I looked at Abinader's CMake tutorial#1, but haven't had success so far.
any suggestions?? Thanks in advance !
Not a direct answer, as I've never used fortran with cmake, but I can see a few issues here.
First of all: where is your target helloworld defined? project is not a target.
Secondly: where do you use helloworld_SOURCES variable?
Try a more regular way. In your src/CMakeLists.txt add line at the end of file with:
add_executable(helloworld ${helloworld_SOURCES})
Also remove SET_TARGET_PROPERTIES(helloworld PROPERTIES LINKER_LANGUAGE FORTRAN) from main one as it should not be necessary.
Last advice: try not to use file(GLOB ). It is better to define list of all files manualy.
Probably the upper-case "FORTRAN", when setting the linker language is the problem. Try writing it as "Fortran" as in the enable_language statement. CMake derives the variables it uses from the language and this causes CMake to look for CMAKE_FORTRAN_LINK_EXECUTABLE instead of CMAKE_Fortran_LINK_EXECUTABLE.
As also mentioned by Michal, the add_executable has to be added to your CMakeLists.txt.
I tested your issue with the following CMake configurations files
main CMakeLists.txt:
# States that CMake required version must be greater than 2.8.7
cmake_minimum_required(VERSION 2.8.7)
enable_language (Fortran)
project(helloworld Fortran)
add_subdirectory(src)
src/CMakeLists.txt:
cmake_minimum_required(VERSION 2.8.7)
add_executable(helloworld HelloWorld.f90)
under Linux for following versions:
ifort (IFORT) 16.0.0.20150815
cmake version 2.8.12.2
I prefer to use cmake-gui. There you can define the ifort compiler as follows:
After definition of source code and binary folder, e.g. build, press "Configure" and select
Click "Next" and define the following compilers
Click "Finish" and "Generate".
Go to build/src folder and execute make. The helloworld executable is generated with ifort successfully and could be called here.
Hint: If ifort is already the default native compiler on your Linux computer then you don't have to specify it in cmake-gui and can go ahead with the first option "Use default native compilers".
Hope it helps.
Let's try this step-by-step:
1) Your Fortran Hello, world is OK!
src/hello.f90
!Test helloworld in Fortran using Cmake
program hello
print *, "Hello World!"
end program hello
2) Now let's write the "inner" CMakeLists.txt
src/CMakeLists.txt
add_executable(helloworld hello.f90)
set_target_properties(
helloworld
PROPERTIES
LINKER_LANGUAGE Fortran
RUNTIME_OUTPUT_DIRECTORY ${PROJECT_SOURCE_DIR}/build)
Here we've created an executable file, which you haven't in your question. Also, we've set its linker language to Fortran (it's case-sensitive parameter!) and the output directory for the compiled file.
3) Now we'll create the "main" CMakeLists.txt
CMakeLists.txt
# States that CMake required version must be greater than 2.8.7
cmake_minimum_required(VERSION 2.8.7)
project(helloworld Fortran)
add_subdirectory(src)
Here we've specified the src subdirectory with inner CMakeLists.txt and the compiler language - it's enough to use project() function, there's not need to use it together with enable_language().
4) Finally, let's build our code in out-of-source manner and run it!
cmake -S . -B build
cmake --build build
./build/helloworld
I have a very simple directory structure:
Project
Project/src
Project/build
Source files are in Project/src, and I do the out-of-src build in Project/build. After running cmake ../ ; make, I can run the executable thusly: Project/build$ src/Executable - that is, the Executable is created in the build/src directory.
How do I set the location of the executable in the CMakeLists.txt file? I've attempted to follow some of the examples found at cmake.org, but the links that work don't seem to show this behaviour.
My Project/src/CMakeLists.txt file is listed here.
include_directories(${SBSProject_SOURCE_DIR}/src)
link_directories(${SBSProject_BINARY_DIR}/src)
set ( SBSProject_SOURCES
main.cpp
)
add_executable( TIOBlobs ${SBSProject_SOURCES})
And the top-level Project/CMakeLists.txt:
cmake_minimum_required (VERSION 2.6)
project (SBSProject)
set (CMAKE_CXX_FLAGS "-g3 -Wall -O0")
add_subdirectory(src)
You have a couple of choices.
To change the default location of executables, set CMAKE_RUNTIME_OUTPUT_DIRECTORY to the desired location. For example, if you add
set (CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR})
to your Project/CMakeLists.txt before the add_subdirectory command, your executable will end up in Project/build for Unix builds or build/<config type> for Win32 builds. For further details, run:
cmake --help-property RUNTIME_OUTPUT_DIRECTORY
Another option for a project of this size is to have just one CMakeLists.txt. You could more or less replace add_subdirectory(src) with the contents of Project/src/CMakeLists.txt to achieve the same output paths.
However, there are a couple of further issues.
You probably want to avoid using link_directories generally. For an explanation, run
cmake --help-command link_directories
Even if you do use link_directories, it's unlikely that any libraries will be found in ${SBSProject_BINARY_DIR}/src
Another issue is that the CMAKE_CXX_FLAGS apply to Unix builds, so should probably be wrapped in an if (UNIX) ... endif() block. Of course, if you're not planning on building on anything other than Unix, this is a non-issue.
Finally, I'd recommend requiring CMake 2.8 as a minimum unless you have to use 2.6 - CMake is an actively-developed project and the current version has many significant improvements over 2.6
So a single replacement for Project/CMakeLists.txt could look like:
cmake_minimum_required (VERSION 2.8)
project (SBSProject)
if (UNIX)
set (CMAKE_CXX_FLAGS "-g3 -Wall -O0")
endif ()
include_directories (${SBSProject_SOURCE_DIR}/src)
set (SBSProject_SOURCES
${SBSProject_SOURCE_DIR}/src/main.cpp
)
add_executable (TIOBlobs ${SBSProject_SOURCES})
Another way of relocating the executable file location is via set(EXECUTABLE_OUTPUT_PATH Dir_where_executable_program_is_located)
build/'config type' for Win32 builds.
For MSVC, to avoid the default "/Debug" created folder
set_target_properties(my_target
PROPERTIES
RUNTIME_OUTPUT_DIRECTORY_DEBUG ${CMAKE_CURRENT_BINARY_DIR})