We have in our table, in SQL Server 2008, the datetime is only holding the date.
There is also an hour col and a minute col, there are for the appointment. the are both columns defined as number.
The hour is typically like this:
12.00
and minute is like 40.00. I tried adding them but it gives a total rather than
12:40 which is what we need. How can I get this to show 12:40. With the : would be better.
Well... taking a shot here, for SQL Server
declare #table table (d datetime,h decimal(4,2), m decimal(4,2))
insert into #table
values
('20170113',12.00,40.00),
('20170113',9.00,8.00)
select
d + cast(left(h,len(floor(h))) + ':' + cast(left(m,len(floor(m))) as varchar(2)) + ':' + '00' as datetime)
from
#table
Prepend 00. to minutes - please note that dot there.
Convert both to times.
Add them.
Convert result back to string.
This way You will also corectly handle situation like 12.40 + 00.30.00 = 13.10
Related
I am trying to create a table in SQL which is about Music, it should contain songDuration. Which means I gotta hold minutes:seconds information in the table. But i have no idea what to use for the type. I am using SQL server.
Edit: I want to use the database for an ASP.NET Core web application. I was using a ready-to-use SQL database like northwnd. Now, I am trying to create one. So, I will not see the timing with SELECT function in SQL query. So, I need to use something that makes it mm:ss otomaticly. Is there is a type that I can decleare like that?
create table musics(
songDuration type,
...)
Why just don't you use int?
So you could calculate duration in the way you like.
E.g. minutes,hours, etc.
There's a datatype time which would be the logical choice, that stores it in format HH:mm:ss with an optional amount of fractional seconds determined by the size you declare the field (e.g. time(3) holds it to three decimal places)
If your source data is already in this notation it makes it getting it in the table easy and simple sorting/filtering operates as you expect. The downside to doing this is if you want to do certain operations such as SUM or AVG (because as a_horse_with_no_name pointed out in their comment) time technically represents a point in time not a duration and you'd have to do some workaround like so:
SELECT totalduration = SUM(DATEDIFF(SECOND, '0:00:00', duration))
FROM dbo.table
Alternatively you could store the number of (say) seconds in the duration using an int, but if you don't already have the information in that format you'd have to do some (light) conversion when inserting the data, and then back if you want to display in mm:ss
e.g:
SELECT CONVERT(varchar, DATEADD(SECOND, durationinseconds, 0), 8) FROM dbo.table
which would convert it back to hh:mm:ss format.
I do this by using an int column, and store the seconds there.
In your client you can calculate from the seconds howmany days, hours, minutes and seconds it is and display it like you want.
To display it in sql you can use this for example
declare #seconds int = 350
select right('00' + convert(varchar, datepart(hour, dateadd(s, #seconds, 0)) + ((#seconds / 86400) * 24)), 2)
+ ':' + right('00' + convert(varchar, datepart(minute, dateadd(s, #seconds, 0))), 2)
+ ':' + right('00' + convert(varchar, datepart(second, dateadd(s, #seconds, 0))), 2)
this will display
00:05:50
which is 0 hours, 5 minutes and 50 seconds
IF the value of seconds is larger than a day, this will be no problem. The number of hours will simply be greater
a value of 350000 will display 97:13:20
I need to be able to get the total hours and minutes if it is over 24 hours from a decimal column in SQL Server.
This is the code I am using:
CAST(CAST(DATEADD(SECOND, 1654.86 * 60, 0) AS Time(0)) AS VARCHAR(5))
Since it's over 24 hours the output is "03:34" I would like for it to be "27:34" or if possible to tell me it will take 3 working days and "03:34" (not sure how that would work).
Thank you in advance! Paul
As explained in the comments, the time data type is not designed to represent any sort of interval or timespan, it is only designed to represent clock time. As such, it is not capable of displaying 27 hours. Instead you need to build this string yourself with methods other than simple CAST as type:
DECLARE #d table(decimal_column decimal(15,2));
INSERT #d(decimal_column) VALUES(1654.86);
SELECT d.decimal_column,
nice_time = CONVERT(varchar(11), FLOOR(h)) + ':'
+ RIGHT('0' + CONVERT(varchar(11), FLOOR(m)), 2)
FROM #d AS d
CROSS APPLY
(
VALUES(d.decimal_column/60, d.decimal_column%60)
) AS extracted(h,m);
Results:
decimal_column
nice_time
1654.86
27:34
Example db<>fiddle
You may have edge cases where you want actual rounding logic instead of FLOOR() - but if you have those cases, include them in your question so we know the desired output.
select CONVERT(VARCHAR, CONVERT(INT, 1654.86/60)) + ':'
+ CONVERT(VARCHAR, CONVERT(INT, 1654.86-(CONVERT(INT, 1654.86/60)*60)))
You can create a function for this query, it is very performance. Because we will not use the same operations in multi sections.
I am working on a query, where I have to fill a table's column ([Result_DateTime]) with datetime values.
The datetime based on two columns, both integer. One contains the date and the other is the time, as it is.
As you can see from the picture, it is a bit difficult to merge and convert these values to an actual datetime, because of the way they are stored. Mainly the time value causing problems.
I concluded how to convert the date column:
CONVERT(DATETIME, LEFT(20200131, 8))
but then I got stuck - what to do with the time and how to merge the two into one datetime effectively?
Using function STUFF looks nasty...
Could you help me out please? I am using SQL Server 2014
Below is one method to do it:
SELECT CAST(Convert(DATE, LEFT(DATEUPDT, 8)) AS VARCHAR(10)) +' '+CAST (TIMEUPDT/100 AS VARCHAR(4)) + ':' + CAST(TIMEUPDT%(100 * (TIMEUPDT/100)) AS VARCHAR(10))+':00'
FROM TEST_TABLE_TIME;
I think I found one solution. What I tried is to avoid using varchar conversions because of how the time column's zeros are cut off. However, I am not convinced that this is the most effective way to do so:
DECLARE #DateInt int = 20200131
DECLARE #TimeInt int = 345 -- 03:45:00
SELECT CONVERT(DATETIME, LEFT(#DateInt, 8)) +
CAST(DATEADD(second, FLOOR(#TimeInt / 100) * 3600 + FLOOR(#TimeInt / 1) % 100 * 60, 0) as datetime)
I was testing it with various time values, it is working.
I am trying to convert minutes into clock time.
I have e.g. minutes = 27822 and want to convert that into clock time even if it passes 24:00 i.e 27822 Minutes = 52:45. I have tried:
CAST([Down Time Minutes] AS DECIMAL(38, 8)) / 3600
This only gives me the hours i.e 03:50 and not with days included if it goes past 24 hours
Please, please, please read the comments that Larnu and Gordon Linoff left - there are very good points and questions in there that should be considered, particularly about how you're choosing to store your data vs how you present it.
But, since it seemed like a fun warm-up with my coffee and I always need a reason to go check on my 2005 installation, here are some options for converting your INT to something that looks sort of like clock time. All of these will output 463:42 as Gordon pointed out.
DECLARE #t INT;
SET #t = 20;
/*SQL Server pre-2008*/
SELECT LEFT('00',2-LEN(#t/60))+CAST((#t/60) AS VARCHAR(5)) + ':' + LEFT('00',2-LEN(#t%60))+CAST((#t%60) AS VARCHAR(2))
/*SQL Server 2008+ -- longer, but we get to play with REPLICATE*/
SELECT REPLICATE('0',2-LEN(#t/60))+CAST((#t/60) AS VARCHAR(5)) + ':' + REPLICATE('0',2-LEN(#t%60))+CAST((#t%60) AS VARCHAR(2))
/*SQL Server 2012+*/
SELECT CONCAT(FORMAT((#t/60),'0#'),':',FORMAT((#t%60),'0#'))
I have a table with 2 columns: Customer_ID, which is a string, identifying each client and Time_id: a string with 14 characters, identifying timestamp of a transaction. Example:
Customer_id; Time_id
12345; 20140703144504
I want to be able to use datediff in hours datepart, but I can´t seem to be able to convert time_id properly. I use the following query:
update transation_table
set time_id= (
convert(timestamp, time_id)
)
It works, but removes hours datepart, which is what I need. For day datepart I can do it, converting to datetime. How can I keep in the table the hh?
edit: I´m running MS SQL Server 2014.
best regards
Using the convert and string concatenation below, you can use DATEPART on the resulting value.
DECLARE #tmp TABLE(
Customer_id VARCHAR(50),
Time_id VARCHAR(50)
)
INSERT INTO #tmp
SELECT '12345','20140703144504'
select
*,CONVERT(DATETIME,
SUBSTRING(Time_id,5,2) + '/' +
SUBSTRING(Time_id,7,2) + '/' +
SUBSTRING(Time_id,1,4) + ' ' +
SUBSTRING(Time_id,9,2) + ':' +
SUBSTRING(Time_id,11,2) + ':' +
SUBSTRING(Time_id,13,2)
,101
)
from #tmp
Use FORMAT to get a string representation of the value in a supported format (ODBC canonical in the Date and Time styles chart), then use TRY_CONVERT to return an actual datetime value:
SELECT TRY_CONVERT(DATETIME,
FORMAT(CAST('20140703144504' AS BIGINT),
'####-##-## ##:##:##'),
120);
This requires SQL Server 2012+.
As mentioned elsewhere, the data should be stored in a single datetime2 column, or paired date and time columns. The above functions can be used to help convert existing data to the new column(s).