I have a very basic question about file upload with embedded Jetty.
When I upload a large file, I know that Jetty server buffers it somewhere. Where does this buffer exist?
Also, Is there a way to disable the buffer and stream the request data directly to a destination such as HDFS?
If we can't disable this buffering, at least I need to have a control on deleting the tmp file after the file upload is complete.
Thanks in advance for the help.
That's defined by the servlet spec location value found in the MultipartConfigElement, typically declared as an #MultipartConfig annotation on the servlet you have receiving the uploaded files.
Related
As far as I understand from the standard which Apache MINA SSHd SFTP server is based on here, it means that it is not necessary to send information about the size of the file transferred beforehand (servers should not require it) - in other words, we never know the size of the file being transferred until we're done with the transfer OR the client used sends it as a file metadata. Is this correct? How to read this metadata? Which SFTP clients send that piece of information?
Those questions are important to tackle the problem of transferring larger files to S3 bucket used as an underlying storage of SFTP. If you don't know the size in advance you cannot do the multipart upload so you have to first store the file in its entirety and only then perform the actual upload - which causes the SFTP session timeout...
Which SFTP clients send that piece of information?
WinSCP does.
PSFTP/FileZilla and OpenSSH sftp do not.
If you don't know the size in advance you cannot do the multipart upload
I do not think you are correct about that. There's nothing in the S3 CreateMultipartUpload request about the actual file size or number of upload parts.
How can I make sure that a file uploaded through SFTP (in a Linux base system) stays locked during the transfer so an automated system will not read it?
Is there an option on the client side? Or server side?
SFTP protocol supports locking since version 5. See the specification.
You didn't specify, what SFTP server are you using. So I'm assuming the most widespread one, the OpenSSH. The OpenSSH supports SFTP version 3 only, so it does not support locking.
Anyway, even if your server supported file locking, most SFTP clients/libraries won't support SFTP version 5. Or even if they do, they won't support the locking feature. Note that the lock is explicit, the client has to request it.
There are some common workarounds for the problem:
As suggested by #user1717259, you can have the client upload a "done" file, once an upload finishes. Make your automated system wait for the "done" file to appear.
You can have a dedicated "upload" folder and have the client (atomically) move the uploaded file to a "done" folder. Make your automated system look to the "done" folder only.
Have a file naming convention for files being uploaded (".filepart") and have the client (atomically) rename the file after an upload to its final name. Make your automated system ignore the ".filepart" files.
See (my) article Locking files while uploading / Upload to temporary file name for example of implementing this approach.
Also, some SFTP servers have this functionality built-in. For example ProFTPD with its HiddenStores directive (courtesy of #fakedad).
A gross hack is to periodically check for file attributes (size and time) and consider the upload finished, if the attributes have not changed for some time interval.
You can also make use of the fact that some file formats have clear end-of-the-file marker (like XML or ZIP). So you know, when you download an incomplete file.
A typical way of solving this problem is to upload your real file, and then to upload an empty 'done.txt' file.
The automated system should wait for the appearance of the 'done' file before trying to read the real file.
A simple file locking mechanism for SFTP is to first upload a file to a directory (folder) where the read process isn't looking. You can "make" an alternate folder using the sftp> mkdir command. Upload the file to the alternate directory, instead of the ultimate destination directory. Once the SFTP> put command completes, then do a move like this:
SFTP> move alternate_path/filename destination_path/filename. Since the SFTP "move" is just switching the file pointers, it is atomic, so it is an effective lock.
My application is keeping watch on a set of folders where users can upload files. When a file upload is finished I have to apply a treatment, but I don't know how to detect that a file has not finish to upload.
Any way to detect if a file is not released yet by the FTP server?
There's no generic solution to this problem.
Some FTP servers lock the file being uploaded, preventing you from accessing it, while the file is still being uploaded. For example IIS FTP server does that. Most other FTP servers do not. See my answer at Prevent file from being accessed as it's being uploaded.
There are some common workarounds to the problem (originally posted in SFTP file lock mechanism, but relevant for the FTP too):
You can have the client upload a "done" file once the upload finishes. Make your automated system wait for the "done" file to appear.
You can have a dedicated "upload" folder and have the client (atomically) move the uploaded file to a "done" folder. Make your automated system look to the "done" folder only.
Have a file naming convention for files being uploaded (".filepart") and have the client (atomically) rename the file after upload to its final name. Make your automated system ignore the ".filepart" files.
See (my) article Locking files while uploading / Upload to temporary file name for an example of implementing this approach.
Also, some FTP servers have this functionality built-in. For example ProFTPD with its HiddenStores directive.
A gross hack is to periodically check for file attributes (size and time) and consider the upload finished, if the attributes have not changed for some time interval.
You can also make use of the fact that some file formats have clear end-of-the-file marker (like XML or ZIP). So you know, that the file is incomplete.
Some FTP servers allow you to configure a hook to be called, when an upload is finished. You can make use of that. For example ProFTPD has a mod_exec module (see the ExecOnCommand directive).
I use ftputil to implement this work-around:
connect to ftp server
list all files of the directory
call stat() on each file
wait N seconds
For each file: call stat() again. If result is different, then skip this file, since it was modified during the last seconds.
If stat() result is not different, then download the file.
This whole ftp-fetching is old and obsolete technology. I hope that the customer will use a modern http API the next time :-)
If you are reading files of particular extensions, then use WINSCP for File Transfer. It will create a temporary file with extension .filepart and it will turn to the actual file extension once it fully transfer the file.
I hope, it will help someone.
This is a classic problem with FTP transfers. The only mostly reliable method I've found is to send a file, then send a second short "marker" file just to tell the recipient the transfer of the first is complete. You can use a file naming convention and just check for existence of the second file.
You might get fancy and make the content of the second file a checksum of the first file. Then you could verify the first file. (You don't have the problem with the second file because you just wait until file size = checksum size).
And of course this only works if you can get the sender to send a second file.
I am new to Mule, so let me say if this is a very basic question then please excuse me.
I am trying to copy a file (size: > 1GB) from one FTP Server(Source) to another FTP Server(Destination).
It takes 1 min to copy the file into the location at which my mule is polling.
As soon as i start copying the file on that location then itself my mule file copy is triggered and tries to read that file and fails as it is still is use by another process.
I wish to make a system in which the file copy is triggered not only when the the mule can detect a file at the Source, but i also want mule to wait for the file to be ready for reading and then start copying it. I don't want to insert a delay of fixed amount for this prupose.
Someone please suggest a method of doing it.
The problem with that readiness is that there is no such kind of standardised flag in the filesystem. So the easier way of doing it is using the ´fileAge´ attribute of the ftp connector, that is sadly EE only.
Can't you move the file to the ftp directory Mule is pollong once is ready to be processed? That wouldn't require copying the file again, so it takes almost no time. Mule would pick it up only when is ready to be processed.
How can I make sure that a file uploaded through SFTP (in a Linux base system) stays locked during the transfer so an automated system will not read it?
Is there an option on the client side? Or server side?
SFTP protocol supports locking since version 5. See the specification.
You didn't specify, what SFTP server are you using. So I'm assuming the most widespread one, the OpenSSH. The OpenSSH supports SFTP version 3 only, so it does not support locking.
Anyway, even if your server supported file locking, most SFTP clients/libraries won't support SFTP version 5. Or even if they do, they won't support the locking feature. Note that the lock is explicit, the client has to request it.
There are some common workarounds for the problem:
As suggested by #user1717259, you can have the client upload a "done" file, once an upload finishes. Make your automated system wait for the "done" file to appear.
You can have a dedicated "upload" folder and have the client (atomically) move the uploaded file to a "done" folder. Make your automated system look to the "done" folder only.
Have a file naming convention for files being uploaded (".filepart") and have the client (atomically) rename the file after an upload to its final name. Make your automated system ignore the ".filepart" files.
See (my) article Locking files while uploading / Upload to temporary file name for example of implementing this approach.
Also, some SFTP servers have this functionality built-in. For example ProFTPD with its HiddenStores directive (courtesy of #fakedad).
A gross hack is to periodically check for file attributes (size and time) and consider the upload finished, if the attributes have not changed for some time interval.
You can also make use of the fact that some file formats have clear end-of-the-file marker (like XML or ZIP). So you know, when you download an incomplete file.
A typical way of solving this problem is to upload your real file, and then to upload an empty 'done.txt' file.
The automated system should wait for the appearance of the 'done' file before trying to read the real file.
A simple file locking mechanism for SFTP is to first upload a file to a directory (folder) where the read process isn't looking. You can "make" an alternate folder using the sftp> mkdir command. Upload the file to the alternate directory, instead of the ultimate destination directory. Once the SFTP> put command completes, then do a move like this:
SFTP> move alternate_path/filename destination_path/filename. Since the SFTP "move" is just switching the file pointers, it is atomic, so it is an effective lock.