I've mistakenly replaced the whole code of a program (selected all and pasted the code of another program) and then activated it. Unfortunately Ctrl+Z doesn't work after a program is activated. Is there a way to retrieve the original code of the program?
Please note that this program hasn't been transported yet, so I cannot use Utilities -> Version -> Version management
Sorry, you lost your code.
If there was no transport before, then you have no history.
For the future: You can always create temporary versions during your developments. I recommend to create a temporary version before you do any critical action. This temporary versions are listed in Utilities -> Version -> Version management until you release your transport.
Related
I have the IDEA Ultimate 2018.1 with flowtype (flow-bin) configured and all the checkboxes selected. I followed this guide: https://www.jetbrains.com/help/idea/2017.2/flow-type-checker.html
The type checking needs much time to be executed. I change something in my code (reverting a wrong annotation, or creating a wrong one), and I need to wait around 30 seconds to get the correct annotation, this is, IDEA triggers the flow server to analyse the files and modify the editor accordingly. That is quite a lot.
Can I trigger that type checking analysis manually inside IDEA to get the editor updated? Or can I change the auto-running interval?
As Kraus noticed, my version of flow-bin was old.
I was using the version 0.26.0 instead of the new 0.74.0, mainly because when I updated flow I was not using flow-bin but flow...
Thanks. Now IDEA and flow are fast.
I have 2 instances of Odoo v9 running in the same server (Ubuntu 14.04). I want to make changes (install modules, change source code or anything) in the developement instance and after confirming they are OK, move the changes to the Production Instance. Is there anyway of doing that without repeating the whole process of development?
Thank you.
As I can understand you do not want to stop the production instance.
If they are only XML files you might be able to get away by only updating the module from the frontend (Apps-> Your Module -> Update. Although if you have modified the __openerp__.py file inside your module you have to enter the debug mode and click Update Apps List first of all.
For changes in files that are inside the static folder of your module, you do not need to stop the server. Although, your users must click ctr + shift + R in order to flush their caches and bring to their browsers the new content.
For Python source code I am afraid that you have to stop both instances of the server so that the code can be correctly recompiled.
(See note 1 on this)
In the end you should stop and update everything because unexpected things might pop up at random times due to resources not been properly updated.
Note 1: The Python documentation about the compilation of Python modules above others mentions:
As an important speed-up of the start-up time for short programs that
use a lot of standard modules, if a file called spam.pyc exists in the
directory where spam.py is found, this is assumed to contain an
already-“byte-compiled” version of the module spam. The modification
time of the version of spam.py used to create spam.pyc is recorded in
spam.pyc, and the .pyc file is ignored if these don’t match.
So theoretically if you modify fileA.py in a module and a new fileA.pyc is generated the server will be able to interpret and use it. In any case I had an issue with two instances running where the py file was creating the field and the XML file was using it and the server reported that a filed had not been created for the XML view, that means that the server did pick up and parse the XML file but did not recompile the py.
I have an odd situation on a VS upgrade from 2013 > 2015 outside of runtime.
App Type: MS Lightswitch HTML Client
DB Type: Oracle
Framework: 4.5
Story: I upgraded VS and replaced OPD.Net to the 2015 version. Works fine.
Then I converted my application. There were a lot of things to fix, but most were pretty easily remedied. I tested the application and it works as expected so I published to test server and everything checks out. Success! So I thought.
I want to continue developing the site. As I make db changes, they need to be reconciled to the intrinsic db in my project.
After clicking 'Update Database' I see this. So far so good.
What's expected is that after I hit 'Finish', all changes to the selected table should pull in to the lsml files. But this is what I get.
I've read a few places like The given key was not present in the dictionary, what key? [closed] but these all look like runtime remediations.
If I go back to the update screen and hit 'Previous', I get this.
I sifted through every freakin lsml file in text editor looking for where the provider is assigned. No luck. I also created a new proj to compare, nothing stood out. I also tried adding another data source which works fine. So ODP.net is not the issue. I am lost on what to do now. I searched all over the site, Google, for every error message with various tags. At this point I reach out to you, or anyone that may know what this is about.
Thanks ahead of time!
Note for future users upgrading a VS LS project with Oracle db.
Since a new version ODP.Net is required (in my case 2015), the provider name is going to change. To ensure LS knows the new provider, the data source lsml file needs to be updated. In my case I used GIT to help out. This is how I resolved it.
Steps:
After converting your project and replacing ODP.net to the current version.
Create a new data source using the new provider.
Save the project and re-open. This will cause lightswitch to recompile.
Open File Explorer and navigatye to the ProjectName.server folder. In a text editor (I used notepad) open the lsml files under ProjectName.server and there should be two lsml files (1 for the pre-existing and another for the new) or more if you have multiple sources.
Copy the connection properties of the new datasource to a new temp file on your desktop.
Roll back the entire solution using GIT or other source control.
Use text editor to open the lsml file for the original data source.
Update the GUID for DataProviderName with the values from the temp file in step 4.
Note: The connection string GUID should be left alone as it should match your GUID in the web.config file.
<DataService.ConnectionProperties>
<ConnectionProperty
Name="DataProviderName"
Value="9d8fdbb9-xxxx-4787-xxxx-49831d34ad4b" />
<ConnectionProperty
Name="ProviderInvariantName"
Value="Oracle.ManagedDataAccess.Client" />
<ConnectionProperty
Name="ConnectionStringGuid"
Value="36e67aca-xxxx-41a7-xxxx-a4546761b30d" />
<ConnectionProperty
Name="ProviderManifestToken"
Value="12.1" />
</DataService.ConnectionProperties>
Finally reload project and the changes should take effect allowing you to once again update your data source.
Thanks
I have two different version of a website, an older version, and a newer version that is supposed to have some sort of virus on it (or malicious code of some kind). I need to perform a diff between the two sites and try to eliminate the virus in the newer one.
After some searching I found netbeans 7.1 is able to do this using it's Git Repository. I was following this tutorial http://netbeans.org/kb/docs/ide/git.html but I am not getting the same options on my screen as in the tutorial. I am using netbeans 7.1 RC1 and downloaded the jdk from the link on that same page. The jdk download itself says jdk7 but the folder it creates on my computer is named jdk1.7.0_01 . I'm assuming jdk7 is short for jdk1.7 .
I get as far as the very end of the "Initializing a Git Repository" step. The end when it says "All the project files are marked Added in your Working Tree. To view a file status, place the cursor over the file name in the Projects window. The status of the file in the Working Tree displays in green to the right of the slash like shown in the following picture." does not happen.
I tried going further anyway, but there is just more and more options that do not show up for me.
I am also open to another way to perform a diff operation between the sites, it doesn't have to be with using netbeans. I should note however I do not have access to a unix box. So the solution has to work for windows, or I guess I can go on a coworkers mac if I need to.
Thank you.
From your question, it sounds like you did not already have your web site code under version control. If that's the case then I'd suggest doing so, and git is a very good choice. It is what I use.
Your goal, however, is to diff the older version of your site with the "newer" (possibly infected) version, and that can be done without having to deal with a version control system. There are several good diff tools for Windows. I mainly use WinMerge, as I like its user interface and simplicity. KDiff3 is another good one, and I use that one in conjunction with git merge operations, because it supports a three-way-merge comparison (which WinMerge does not).
If you were to use WinMerge for your diff, and you had the code from the old version in Q:\example.com\old-version and the "new" version in Q:\example.com\current-version, then you would start WinMerge, and either choose File|Open... from the menu, or click on the open icon in the toolbar. You would get a dialog like the following, and would fill it in as shown:
If you filled everything in correctly, then you would be able to click on the OK button, and would get a list of file differences. Depending on the default settings, you might also see files that have not changed at all in that list. You can hide those using the View menu. Double-clicking on a file with differences will open the two versions and show you the differences.
Explore the WinMerge options. I have mine set, for example, to compare white-space differences, but to ignore different line endings (Unix's LF versus Windows' CR/LF).
I would like to get an automated changelog from Trac, that will include references to tickets that made some important changes to the architecture/design of the code. My ideal scenario would look like this:
According to some ticket I make a change to SVN
I add some specific line to the ticket saying that this changeset created an important change to the code/wiki
I go to some dedicated Trac page and see a full list of such changes made with the project.
In other words, it's going to be a changelog, which is available for all project participants, and the entire team will be updated about the important changes with source code and wiki.
Can you suggest any Trac plugin for this? Or maybe Trac itself can do it?
ps. Would be excellent to have another "Plans Log", where everybody can post their plans on future changes. Again, inside tickets.
Have you tried the ChangeLogMacro on TrackHacks: http://trac-hacks.org/wiki/ChangeLogMacro
Sample:
[7280] by doki_pen on 12/18/09 20:27:15
Update body reference to output.
Since body isn't defined. Fixes #5538
[7191] by doki_pen on 11/26/09
02:18:32
watch user feature
fixes #3546
[7190] by doki_pen on 11/26/09
02:18:21
copy changes
trying to make things more intuitive
for users
Personally I'm looking for something a little more like the VirtualBox changelog which I can then put into a plain text file. So if anyone knows how to do this I'm interested!
www.virtualbox.org/wiki/Changelog
Sample:
VirtualBox 3.1.2 (released 2009-12-17)
This is a maintenance release. The following items were fixed and/or added:
VMM: fixed SMP stability regression
USB: fixed USB related host crashes on 64 bits Windows hosts (#5237)
Main: wrong default HWVirtExExclusive value for new VMs (bug #5664)
Main: DVD passthrough setting was lost (bug #5681)
VBoxManage: iSCSI disks do not support adding a comment (bug #4460)
VBoxManage: added missing --cpus and --memory options to OVF --import
VirtualBox 3.1.0 (released 2009-11-30)
This version is a major update. The following major new features were added:
* Teleportation (aka live migration); migrate a live VM session from one host to another (see the manual for more information)
* ...