I have the problem that at work I can not connect via network to expo, so I need to use tunnel, which is fine. However sometimes the tunnel is really slow destroying any developer expierience.
Since I can also host expo locally on localhost I had the idea of simply ssh-tunneling to a remote server that has an open port.
my remote host runs ubuntu
so i SSH there like so:
ssh -R 0.0.0.0:19000:0.0.0.0:19000 user#ip
in order for this to work i also added
GatewayPorts clientspecified
to my /etc/ssh/sshd_config
...
sudo netstat -plutn
shows me
tcp 0 0 0.0.0.0:19000 0.0.0.0:* LISTEN 20183/2
so accepting requests (i also tried to forward port 19001 to get something back when i enter it in the browser which worke fine)
However when i enter:
exp://serverip:19000 into the expo client on my android phone he can't connect.
Any ideas on help?
It looks like Expo uses multiple ports 19000, 19001, and 19002. So you will need to forward all of these.
e.g.
$ ssh -f -N -R 19000:localhost:19000 user#ip
$ ssh -f -N -R 19001:localhost:19001 user#ip
$ ssh -f -N -R 19002:localhost:19002 user#ip
Also, you can set the REACT_NATIVE_PACKAGER_HOSTNAME environment variable to use the remote host.
$ export REACT_NATIVE_PACKAGER_HOSTNAME="ip"
$ expo start
In macOS 10.12.6
When ssh to a server use the follow command:
ssh -i ~/key.pem ubuntu#123.111.222.101
the connection will keep until I disconnect it manually or the computer fall asleep.
However, when I ssh to the server behind a proxy:
ssh -i ~/key.pem -o ProxyCommand='/usr/bin/nc -x 127.0.0.1:1080 %h %p' ubuntu#123.111.222.101
the connection will disconnect if I don't type any word in the terminal after 30 seconds.
Why this will happen and how to keep the connection?
P.S.: the protocol of my proxy is socks5
Add this option. This should keep the connection open
-o ServerAliveInterval=15
Establishing SSH tunnel can done from the command line by explicitly giving
ssh -N -f -L 18888:192.168.224.143:8888 username#192.168.224.143
or defining tunnel in ~/.ssh/config file
Host tunnel
HostName 192.168.224.143
IdentityFile ~/.ssh/mine.key
LocalForward 18888 192.168.224.143:8888
User username
and then running,
ssh -f -N tunnel
Is there a way to start this tunnel without running the ssh ssh -f -N tunnel command explicitly?
I would like to establish this tunnel whenever my machine boots up. Do not want to add it in init script. Can it be done with SSH configuration itself?
No. SSH configuration is not designed to start something for you automatically. You need to add it to your startup applications or init script/systemd service, if you want to start it automatically after the network.
I also recommend you to use autossh which will take care of re-establishing the tunnel, if it fails for some reason.
I have an ansible playbook which connects to a virtual machine via a non-standard ssh port (forwarded to localhost) and a different user than the host user (vagrant).
The ssh port is specified in the ansible inventory:
[vms]
localhost:2222
The username given on the command line to ansible-playbook:
ansible-playbook -i <inventory from above> <some playbook> -u vagrant
The communication with the VM works correctly, however, %p always expands to 22 and %r to the host username.
Consequently, I cannot flush the SSH connection (for the user's changed group membership to take effect) like this:
- name: flush the ssh connection
command: ssh -o ControlPath="~/.ansible/cp/ansible-ssh-%h-%p-%r" -O stop {{inventory_hostname}}
delegate_to: 127.0.0.1
Am I making a silly mistake somewhere? Alternatively, is there a different way to flush the SSH connection?
The percent expand is not expanded by ansible, but by ssh later on.
Sorry, forgot to add the most important part
Using
command: ssh -o ControlPath=[...] -O stop {{inventory_hostname}}
will use default port, because you didn't specify it on the command-line. You would have to specify also the port to "flush" the connection this way:
command: ssh -o ControlPath=[...] -O stop -p {{inventory_port}} {{inventory_hostname}}
But I don't think it is needed. Ansible should clean up the connections when the playbook ends and I don't see any different reason why to do that.
I'm currently running a bunch of:
sudo ssh -L PORT:IP:PORT root#IP
where IP is the target of a secured machine, and PORT represents the ports I'm forwarding.
This is because I use a lot of applications which I cannot access without this forwarding. After performing this, I can access through localhost:PORT.
The main problem occured now that I actually have 4 of these ports that I have to forward.
My solution is to open 4 shells and constantly search my history backwards to look for exactly which ports need to be forwarded etc, and then run this command - one in each shell (having to fill in passwords etc).
If only I could do something like:
sudo ssh -L PORT1+PORT2+PORT+3:IP:PORT+PORT2+PORT3 root#IP
then that would already really help.
Is there a way to make it easier to do this?
The -L option can be specified multiple times within the same command. Every time with different ports. I.e. ssh -L localPort0:ip:remotePort0 -L localPort1:ip:remotePort1 ...
Exactly what NaN answered, you specify multiple -L arguments. I do this all the time. Here is an example of multi port forwarding:
ssh remote-host -L 8822:REMOTE_IP_1:22 -L 9922:REMOTE_IP_2:22
Note: This is same as -L localhost:8822:REMOTE_IP_1:22 if you don't specify localhost.
Now with this, you can now (from another terminal) do:
ssh localhost -p 8822
to connect to REMOTE_IP_1 on port 22
and similarly
ssh localhost -p 9922
to connect to REMOTE_IP_2 on port 22
Of course, there is nothing stopping you from wrapping this into a script or automate it if you have many different host/ports to forward and to certain specific ones.
For people who are forwarding multiple port through the same host can setup something like this in their ~/.ssh/config
Host all-port-forwards
Hostname 10.122.0.3
User username
LocalForward PORT_1 IP:PORT_1
LocalForward PORT_2 IP:PORT_2
LocalForward PORT_3 IP:PORT_3
LocalForward PORT_4 IP:PORT_4
and it becomes a simple ssh all-port-forwards away.
You can use the following bash function (just add it to your ~/.bashrc):
function pfwd {
for i in ${#:2}
do
echo Forwarding port $i
ssh -N -L $i:localhost:$i $1 &
done
}
Usage example:
pfwd hostname {6000..6009}
jbchichoko and yuval have given viable solutions. But jbchichoko's answer isn't a flexible answer as a function, and the opened tunnels by yuval's answer cannot be shut down by ctrl+c because it runs in the background. I give my solution below solving both the two flaws:
Defing a function in ~/.bashrc or ~/.zshrc:
# fsshmap multiple ports
function fsshmap() {
echo -n "-L 1$1:127.0.0.1:$1 " > $HOME/sh/sshports.txt
for ((i=($1+1);i<$2;i++))
do
echo -n "-L 1$i:127.0.0.1:$i " >> $HOME/sh/sshports.txt
done
line=$(head -n 1 $HOME/sh/sshports.txt)
cline="ssh "$3" "$line
echo $cline
eval $cline
}
A example of running the function:
fsshmap 6000 6010 hostname
Result of this example:
You can access 127.0.0.1:16000~16009 the same as hostname:6000~6009
In my company both me and my team members need access to 3 ports of a non-reachable "target" server so I created a permanent tunnel (that is a tunnel that can run in background indefinitely, see params -f and -N) from a reachable server to the target one. On the command line of the reachable server I executed:
ssh root#reachableIP -f -N -L *:8822:targetIP:22 -L *:9006:targetIP:9006 -L *:9100:targetIP:9100
I used user root but your own user will work. You will have to enter the password of the chosen user (even if you are already connected to the reachable server with that user).
Now port 8822 of the reachable machine corresponds to port 22 of the target one (for ssh/PuTTY/WinSCP) and ports 9006 and 9100 on the reachable machine correspond to the same ports of the target one (they host two web services in my case).
Another one liner that I use and works on debian:
ssh user#192.168.1.10 $(for j in $(seq 20000 1 20100 ) ; do echo " -L$j:127.0.0.1:$j " ; done | tr -d "\n")
One of the benefits of logging into a server with port forwarding is facilitating the use of Jupyter Notebook. This link provides an excellent description of how to it. Here I would like to do some summary and expansion for all of you guys to refer.
Situation 1. Login from a local machine named Host-A (e.g. your own laptop) to a remote work machine named Host-B.
ssh user#Host-B -L port_A:localhost:port_B
jupyter notebook --NotebookApp.token='' --no-browser --port=port_B
Then you can open a browser and enter: http://localhost:port_A/ to do your work on Host-B but see it in Host-A.
Situation 2. Login from a local machine named Host-A (e.g. your own laptop) to a remote login machine named Host-B and from there login to the remote work machine named Host-C. This is usually the case for most analytical servers within universities and can be achieved by using two ssh -L connected with -t.
ssh -L port_A:localhost:port_B user#Host-B -t ssh -L port_B:localhost:port_C user#Host-C
jupyter notebook --NotebookApp.token='' --no-browser --port=port_C
Then you can open a browser and enter: http://localhost:port_A/ to do your work on Host-C but see it in Host-A.
Situation 3. Login from a local machine named Host-A (e.g. your own laptop) to a remote login machine named Host-B and from there login to the remote work machine named Host-C and finally login to the remote work machine Host-D. This is not usually the case but might happen sometime. It's an extension of Situation 2 and the same logic can be applied on more machines.
ssh -L port_A:localhost:port_B user#Host-B -t ssh -L port_B:localhost:port_C user#Host-C -t ssh -L port_C:localhost:port_D user#Host-D
jupyter notebook --NotebookApp.token='' --no-browser --port=port_D
Then you can open a browser and enter: http://localhost:port_A/ to do your work on Host-D but see it in Host-A.
Note that port_A, port_B, port_C, port_D can be random numbers except common port numbers listed here. In Situation 1, port_A and port_B can be the same to simplify the procedure.
Here is a solution inspired from the one from Yuval Atzmon.
It has a few benefits over the initial solution:
first it creates a single background process and not one per port
it generates the alias that allows you to kill your tunnels
it binds only to 127.0.0.1 which is a little more secure
You may use it as:
tnl your.remote.com 1234
tnl your.remote.com {1234,1235}
tnl your.remote.com {1234..1236}
And finally kill them all with tnlkill.
function tnl {
TUNNEL="ssh -N "
echo Port forwarding for ports:
for i in ${#:2}
do
echo " - $i"
TUNNEL="$TUNNEL -L 127.0.0.1:$i:localhost:$i"
done
TUNNEL="$TUNNEL $1"
$TUNNEL &
PID=$!
alias tnlkill="kill $PID && unalias tnlkill"
}
An alternative approach is to tell ssh to work as a SOCKS proxy using the -D flag.
That way you would be able to connect to any remote network address/port accesible through the ssh server as long as the client applications are able to go through a SOCKS proxy (or work with something like socksify).
If you want a simple solution that runs in the background and is easy to kill - use a control socket
# start
$ ssh -f -N -M -S $SOCKET -L localhost:9200:localhost:9200 $HOST
# stop
$ ssh -S $SOCKET -O exit $HOST
I've developed loco for help with ssh forwarding. It can be used to share ports 5000 and 7000 on remote locally at the same ports:
pip install loco
loco listen SSHINFO -r 5000 -r 7000
First It can be done using Parallel Execution by xargs -P 0.
Create a file for binding the ports e.g.
localhost:8080:localhost:8080
localhost:9090:localhost:8080
then run
xargs -P 0 -I xxx ssh -vNTCL xxx <REMOTE> < port-forward
or you can do a one-liner
echo localhost:{8080,9090} | tr ' ' '\n' | sed 's/.*/&:&/' | xargs -P 0 -I xxx ssh -vNTCL xxx <REMOTE>
pros independent ssh port-forwarding, they are independent == avoiding Single Point of Failure
cons each ssh port-forwarding is forked separately, somehow not efficient
second it can be done using curly brackets expansion feature in bash
echo "ssh -vNTC $(echo localhost:{10,20,30,40,50} | perl -lpe 's/[^ ]+/-L $&:$&/g') <REMOTE>"
# output
ssh -vNTC -L localhost:10:localhost:10 -L localhost:20:localhost:20 -L localhost:30:localhost:30 -L localhost:40:localhost:40 -L localhost:50:localhost:50 <REMOTE>
real example
echo "-vNTC $(echo localhost:{8080,9090} | perl -lpe 's/[^ ]+/-L $&:$&/g') gitlab" | xargs ssh
Forwarding 8080 and 9090 to gitlab server.
pros one single fork == efficient
cons by closing this process (ssh) all forwarding are closed == Single Point of Failure
You can use this zsh function (probably works with bash, too)(Put it in ~/.zshrc):
ashL () {
local a=() i
for i in "$#[2,-1]"
do
a+=(-L "${i}:localhost:${i}")
done
autossh -M 0 -o "ServerAliveInterval 30" -o "ServerAliveCountMax 3" -NT "$1" "$a[#]"
}
Examples:
ashL db#114.39.161.24 6480 7690 7477
ashL db#114.39.161.24 {6000..6050} # Forwards the whole range. This is simply shell syntax sugar.