please help! I'm struggling with this one.
I have two worksheets. In worksheet 1 is a list of case reference numbers for people (each person is identified by a PIN).
The case numbers are in column A and the PIN in column B. Some PINS will be listed more than once and have more than one case number.
On worksheet 2 is a list of the PINs in column A with the persons name etc alongside. In column H I would like to enter an index match formula to match the pin number in say A2 against the PIN's in worksheet 1 and return the case number in column H on worksheet 2.
I can get this to work with no problem but it only returns the first value.
I wonder if there is any way of creating a drop down box so that in column H on worksheet 2 it will show ALL the case numbers found on worksheet 1 that match the PIN in say A2 on worksheet 2?
Please help, it's driving me crackers and I just cant work it out...
Lolli x
Related
Example file So I have two sheets that each have lists of part numbers, plant where they come from and two columns on costs. What I need to do is scan them and if Sheet A and Sheet B both have a row with matching part numbers and the plant they come from, then A's two cost values are updated to match B's costs.
The next step is then to highlight all cells in Sheet A that are not on Sheet B and highlight all cells in Sheet B that were copied to Sheet A. I think this last part can be done at the same time the cell is being copied I'm just not sure how to do any of this.
This is a formula method.
Because you will not be changing all the values and I assume you want to keep those that do not have a match, then in an empty column next to the figures on sheet 1 put the following formula:
=IFERROR(INDEX(Sheet2!F$3:F$7,MATCH(1,INDEX((Sheet2!$D$3:$D$7=$A3)*(Sheet2!$B$3:$B$7=$C3),),0)),G3)
Then copy over one column and down the the end of the data.
The INDEX((Sheet2!$D$3:$D$7=$A3)*(Sheet2!$B$3:$B$7=$C3),) will create an array of 0 and 1's the same size as the data reference on sheet 2. In this instance it will create a 1 dimensional array that is 5 objects.
The position of these objects of 0 and 1 are relative to the rows. So for the first formula the return array will be {0,1,0,0,0} because only the second row of the data matches both the plant and the part number.
The MATCH(1,INDEX(...),0) then finds the first object in that array that is 1 and returns the relative position, in this case 2 as it is the second in the array.
The Outer INDEX(Sheet2!F$3:F$7,...) then returns the value in the range Sheet2!F$3:F$7 whose relative position is equal to the 2 passed from the MATCH(). So Sheet2!F4.
If no MATCH is found then the whole thing will throw a #N/A error so we capture that error with IFERROR(...,G3) and tell the formula to return the value in column G instead.
This will give you all the proper values:
Then you can copy and paste just the values back to the original spots and hide the columns with the formulas:
Sheet2 for reference:
If you want vba to do the last part of copy and past and hiding then use the macro recorder and then clean up the code.
i would like to create an extra column in sheet one which displays a character (for example G) after it finds the matching values from sheet 2.below are two screen shots i have taken for all your conveniences.
please note,in sheet 1 i have marked two rows with identical bs_cd 6374 which matches the bs_cd 6374 in sheet 2 also.what i want is to have a character G in sheet 1 under column G.
thanks in advance
Insert into the cell G2 this formula and drag it down:
=IF(VLOOKUP(B2;Sheet2!$A$2:$A$100;1;FALSE)=0;"";"G")
Change $A$2:$A$100 to your range in sheet2
I am trying to figure out if there are any differences between a list of data with another. In order for a row of data to "match" with another row, the row must have the same values in their corresponding column. The rows themselves do not have to be in any particular order. In particular, I am dealing with a parts list, where there are part numbers, descriptions, etc. I am trying to figure out if any rows of data are different from rows of data from another list.
I found Compare two sheets using arrays, which may have the answer to my problem, but I am having trouble figuring out how to adapt to my code due to inexperience in Visual Basic.
I was able to get it to work for a single column of data, comparing one column of data from one sheet to another, but cannot get it to compare entire rows of data.
Here is an example of I want this to work:
Sheet 1 Sheet 2
Column 1 Column 2 Column 1 Column 2
Row 1 22a 33 11 11
Row 2 22a 33a 22a 33
Row 3 55 22b 55 23b
The code in the link will tell you what is not in sheet 1 but in sheet 2 and vice versa. In this example, I would like the code to tell me Sheet 1 Row 2 and Sheet 1 Row 3 are not in Sheet 2, and Sheet 2 Row 1 and Sheet 2 Row 3 are not in Sheet 1 (Sheet 1 Row 1 and Sheet 2 Row 2 match).
If that is ok by you, you can do it without VBA using the following formula:
={IF(IFERROR(MATCH(A1&"|"&B1;Sheet7!$A$1:$A$3&"|"&Sheet7!$B$1:$B$3;0);-1)=-1;"Unique";"")}
Assuming that each of your tables start in A1 (so that the tables with three entries span A1:B3), and entering this formula into C1 (and copying it down), press CTRL+SHIFT+ENTER when entering the formula to create an array formula, this will show the word "Unique" in column C if the pair in that row on that sheet is not in any of the row-pairs on sheet 2.
You can then use conditional formatting to highlight unique rows, filter on the tables to include only unique rows, or some other way of doing what you need.
NOTE 1: I have entered my numbers in Sheet6 and Sheet7 instead of 1 and 2. The formula written above goes into Sheet6.
NOTE 2: My language use ; instead of , as function separator, so if yours use , you need to change that.
NOTE 3: You will need to expand the ranges Sheet7!$A$1:$A$3 and Sheet7!$B$1:$B$3 if your set grows (this will happen automatically if new rows are inserted in between the old ones). The best is still probably to create named ranges for each of the 4 columns, exchange the references with those, and manage the named ranges instead of the formulas.
NOTE 4: If your data set contains the character "|", you need to change that as well, to match some character that you for sure do not have there.
Alternatively you could in column C on each cheet enter (assuming first entry in C1)
=A1&"|"&B1"
and copy this down, then run the solution from your copied example using that C column instead of on A1 and B1.
Ive never used vlookups i have a spreedsheet not sure if this is the right function. I have two sheets
Sheet 1
first name last name username
Sheet 2
first name last name employee id business unit
I need in column D on sheet 1 to have employee id ive below. Pay no attention to column letters and sheets because i moved to another sheet to try getting this right.
=MATCH(B11,Sheet1!C:C,0)
Any help is much appreciated.
So you realize you have to match both first and last names? There are several ways to accomplish this depending on how many employees you have in sheet 2: a) small list could a two-column search using array formula; b) large list just create another column in both sheets joining last & first names and do a MATCH or VLOOKUP on them.
Since your needs are simple and to illustrate option (b):
Insert a column in both Sheet1 and Sheet2 after the "last name"; you should now have an empty column C in both sheets.
Assuming you have column headers in row one, and thus data starts in row two, set cell C2 in both sheets with function =B2&","&A2, then fill-down that formula on both sheets in all rows.
Set Sheet1 cell E2 to formula =VLOOKUP(Sheet1!C2, Sheet2!$C:$D, 2, False), and fill-down that formula in all rows.
Voila, employee IDs on Sheet1. I do have to say this is so Excel 101. There are all sorts of examples and tutorials on this easily found using even the most trivial Google searches.
I'm looking to generate a report to list the number of Cities/Towns that don't meet a certain criteria so on Sheet 2 I have an alphabetical list of all the cities/towns.
I want to do a look up/count if function to state if A2(Sheet 2) can be found anywhere in Column D on Sheet 1 then count it if the date in column L (sheet 1) matches the date in Cell $E$1 (sheet 2) and Column A in Sheet 1 is greater than zero.
I originally done this formula but it is returning an error.
=COUNTIFS(PickData!D:D,Sheet1!A2,PickData!L:L,Sheet1!$E$1,PickData!A:A,PickData!A:A>0)
Is there any other formulas that I'm currently not thinking of? Or is it possible to do this via VBA and it returns the value in to column B either True if it matches or False if it doesn't?
Thanks
Al
The problem with your previous formula is in the final criteria. Update to:
=COUNTIFS(PickData!D:D,Sheet1!A2,PickData!L:L,Sheet1!E2,PickData!A:A,">0")