I made a SolidWorks Addin using VB 2015. It works fine on SolidWorks 2015 but does not work on any higher release for SolidWorks (e.g. 2016, 2017). Not sure what I am doing wrong as these addins should not be release specific.
Any Help Would be greatly appreciated.
Thanks,
Pranav
This happens for a couple of reason, always associated with where the COM Interop files were and are now on your system.
The first is if you referenced the exposed COM that is available when you install SolidWorks from the screen below. This always created problems when the old version of SolidWorks is uninstalled or upgraded. Your projects will show a warning within the references in your project.
The second often happens when you reference the Interop dll from the installation location (usually C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.sldworks.dll). This is what the SolidWorks Addin Template does by default. Sometimes if you forget to remove the SolidWorks installation directory when installing a new version of SolidWorks, it creates a folder with a different name (SOLIDWORKS Corp\SOLIDWORKS (2) by default). The problem is now the referenced dll file's path has changed and your project can no longer find it.
The best way to solve these issues is to create a copy of the dlls you want to reference in your project's folder structure and browse to them within your project like below.
Doing this will ensure that your project always references this dll, that shouldn't be removed or have its path changed regardless of what you do with your SolidWorks Installation.
If for some reason the addin template does reference this location, go to your references in the Project Explorer, and remove them, and re-point them to a local copy (not the installed files).
Related
I have an Excel 2016 solution that contains C# COM components as part of the deployment. I am able to get the COM components to register OK. However, there were a couple controls that were used, that existed on the development system that need to package as well.
TreeView and ListView controls are added in the references in the VBA IDE. It referenced MSCOMCTL.OCX. I have added this file as a dependency in the installer. However, the installation fails to register the file. I suspect that there may be additional dependencies I am missing?
I have used a third party dll(ABCpdf) in my .NET app and installed the app onto another machine. The program worked fine but then the trial expired and we purchased the third-party component and copied the new dll into the application directory. When running my app we got an error that assembly could not be loaded. I have noticed that the reference to the dll has copy local set to false so I changed it to true. Still getting the same error.
I checked and there are a number of copied of the dll on the machine - one in the folder of the installed third-party application, one in application folder of my application (copied from the installation folder) and also one in GAC. I did set copy local to true but then again, once the assembly is installed in GAC, that's the version that will always be used.
How can I resolve the issue? Would deleting dll from GAC be safe? Would it resolve my issue? Please advise
Check the references used, etc.
First of all be sure that you're compiling with the right version, with license installed.
You can use this code to add the license key on runtime (to avoid future errors in your customers):
WebSupergoo.ABCpdf7.XSettings.InstallRedistributionLicense("your_serial")
AbcPDF don't need to be installed on GAC. So you can remove it from there.
Then, check the 32/64 bits issue, because ABCpdf use to provide 4 dlls, 2 for each platform (ABCPDF.dll and ABCPdfCEXX.dll).
Try deleting the DLL reference in your project's References and then readding it. Make sure you are adding the purchased DLL that is in your application's directory. I've had to do this plenty of times before when fighting with third-party DLLs...it usually works.
I'm following the excellent tutorial by Malte Ahrens on how to create a OneNote add-in.
Initially I followed it step by step, making a few changes (just renaming the class, and using my own name and GUID in the assembly) info. As I'm using VS2012 and am not yet ready to hand-roll a WiX installer I manually copied over the built dll to the correct place and also created a registry file to make the requisite entries. I confirmed that they were all there, loaded up OneNote but no add-in, going to "mange COM addins" section I saw the following error:
Load Behavior: Not loaded. A runtime error occurred during the loading of the COM Add-in.
I spent some time debugging this but didn't get very far. So this afternoon I decided to start again but copy his code verbatim. I simply downloaded the example project, used the trial of Vdproj to Wix to create the installer and built everything.
I get the exact same error.
Why is this please? What does this mean and most importantly how do I debug the problem?
A few specifics about my environment and where it may differ from the original tutorial.
I am running Office 2013 AND it's 64bit. His tutorial is for 2010. This means when I loaded up the demo solution I had to remove the non-existent reference to the Onenote 14 Interop and add the v15 version.
In terms of registry entries they go to the right place, not the WOW6432 registry nodes. I doubly know this as if I load up OneNote and then refresh the HKCR registry node for the add-in, the LoadBehavior switches to 0x00000002, (disabled).
Other things that may be worth noting.
I have enabled OneNote logging and it's quiet on my issue.
There are 2 other posts on here with a seemingly similar problem (but Office 2010) here and here, neither got a response. The first guy had it loading once, but then had to manualy start it each time, mine never loads (and I've not signed my assembly) the second guy never got a response.
As I say, even knowing how to debug this further would be a great step forwards.
Edit:
I've gone back to debugging my own version, which is almost identical anyway as I'm not sure what the installer is actually doing and I think because it's a demo of the wix converter it's only allowing me to build for x86.
If I add OneNote.exe under "start external program" and run debug on my add-in, I see the following lines appear when I try and tick the add-in under "manage COM add-ins" within OneNote. I'm afraid I'm still pretty green at all this so I'm not sure what it means.
First-chance exception at 0x00007ffe4f86ab78 in ONENOTE.EXE: 0x800401FD: Object is not connected to server.
First-chance exception at 0x00007ffe4f86ab78 in ONENOTE.EXE: 0x800401FD: Object is not connected to server.
First-chance exception at 0x00007ffe4f86ab78 in ONENOTE.EXE: 0x800401FD: Object is not connected to server.
Also, since reading up more I think me simply copying my dll into the install folder program files\[manufacturer]\[application] (as I don't have an installer) was not enough. I've now executed this against my dll
PS C:\WINDOWS\Microsoft.NET\Framework64\v4.0.30319> .\RegAsm.exe
and it came back with
Microsoft .NET Framework Assembly Registration Utility version 4.0.30319.33440
for Microsoft .NET Framework version 4.0.30319.33440
Copyright (C) Microsoft Corporation. All rights reserved.
Types registered successfully
Is there anything else I should be doing to register the dll correctly?
Enable logging for OneNote 2013:
Create a file "EnableOneNote2013APILogging.reg"
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\OneNote\Options\Logging]
"EnableLogging"=dword:00000001
"EnableTextFileLogging"=dword:0000001
"ttidLogObjectModel"=dword:00000001
"ttidLogObjectModelAddins"=dword:00000001
Create a file "DisableOneNote2013APILogging.reg"
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\OneNote\Options\Logging]
"EnableLogging"=dword:00000000
"EnableTextFileLogging"=dword:0000000
"ttidLogObjectModel"=dword:00000000
"ttidLogObjectModelAddins"=dword:00000000
This is based on http://blogs.msdn.com/b/descapa/archive/2006/12/08/debugging-the-onenote-api-enable-logging.aspx but you need to add EnableTextFileLogging ;-).
The logfile is created in %temp%\OneNote.log
For OneNote 2010 change the path in the .reg files to \14.0\ instead of \15.0\
I'm working with some application handed over by another person in which I must document the requirements, build and deploy processes.
The problem here is that Visual Studio (2005) is throwing a lot of errors since it can't find the references for the dlls.
This obviously won't let VS build the project.
Everything works fine on the persons computer but not on mine, even though the project references the same folder where the dlls are, the bin folder.
How can I circumvent these problems and get VS to properly reference the dlls?
The following printscreen shows the references screen for the project.
My guess is that your DLL uses a more recent .NET framework than your application does.
Check the properties for your DLL source (right-click on the DLL code in the solution explorer and choose Properties). Go to Application - Target .NET framework and compare the version to the one the application itself uses (right-click on the project code). Note: under your application properties check both the settings under Application - Target .NET framework AND under Publish - Prerequisites.
For what it's worth, even after changing the .vbproj file and removing many lines about hard coded values,
I eventually checked out the project again removed all references to the given DLL and then added it using the GUI.
Lesson learned, don't try to change out one DLL for a newer version without using VB2005 GUI.
The easiest solution will probably be to transfer everything to another project. It will be incredibly time consuming to find where visual studio has left the hard coded path at.
WOOT!!!! Compile the DLL file to a lower version of the .NET framework, and it will fix the problem!!!!
The paths in the project file cannot be the same or the assemblies referenced have a different version.
It might be worth unloading your project and the editing it to inspect where it's looking and for what version.
I had the same problem with an older Visual Studio Project that I opened in Visual Studio 2008. I tried to add new references to the project and got permanent errors that the dll's cannot be found. After the migration of the Project to Visual Studio 2010 I got the following error message when I tried to add a new reference:
'mySample.dll' or one of its dependencies, requires a later version of the .NET Framework than the one specified in the project. You can change ...
After changing the projects .NET Framework to a newer version everything works fine.
Good suggestions in other answers. In my case, it was because the libraries weren't copied (downloaded) successfully: the files existed, but were 0 kB.
Did a clean, which removed all the DLL's and then VS2008 complained it couldn't find the references (Duh!!!) and wouldn't rebuild....luckily I had and old version of the dll's and replaced them in the directory AND THEN did a rebuild to replace them...all references are now OK and we're back to normal....good old VS 2008
I've created my first Office Add-in using Visual Studio. It targets the 4.0 .Net framework and was created using the new VS 2012. I need to distribute/install this project on various 32-bit XP and 64-bit Windows 7 computers around the office. So I configured the project to be installed on XP (which was my first speed bump because I didn't realize VS 2012 needed an update in order to make a solution that was XP compatible). Now that I have a valid win32 application, I am getting another error:
The following error occurred attempting to install 'C:\filepath...\Import Contacts.vsto':
"No application is associated with the specified file for this operation."
After doing some digging, I think I need to install the Microsoft Visual Studio Tools for Office Runtime on the client computer. To do this, I would like to use the prerequisites properties for the project. So I read up on creating custom prerequisites using some noteworthy sites (e.g, Creating Bootstrapper Packages, Application Deployment Prerequisites, Adding Custom Prerequisites, and Creating a Bootstrapper package for Office 2013 in Visual Studio 2012). I created the files according to that last URL (even though I'm not sure it pertains to the package I need just yet), but it is not appearing in the dialog box under Project > Properties > Publish > Prerequisites
If you read the article, it says the VS prerequisites dialog box should automatically update once I restart VS 2012, which I did but to no avail. I know I'll need to use this feature again in the future, so I would really like to know what I'm doing wrong and fix this. Please help! And I promise to quickly give the ACCEPT to whoever helps me fix this problem! Thank you in advance.
I didn't have any problems following the directions given in the web page and got the bootstrapper added to the Prerequisites dialog. However, there are plenty of possible ways to get it wrong. Some possibilities:
Triple-check the folder you added these files to. Be sure that you picked Program Files (x86) on a 64-bit version of Windows and not Program Files. And be sure that you now see the added VSTOR40 folder along with the other existing bootstrapper folders, like ReportViewer and VBPowerPacks.
You do not have write permission to this folder, UAC prevents copying files there. Be sure that you managed to copy them from, say, an elevated command prompt. Right-click the Command Prompt shortcut and click "Run as Administrator".
If you created the .xml files with Notepad then make sure you didn't accidentally saved them with the .txt extension. If necessary, put Explorer in "programmer mode" so you can see the filename extensions. Control Panel + Folder Options, View tab, untick the "Hide extensions for known file types" checkbox. If you now see product.xml.txt then rename the file to product.xml, same for package.xml.txt
If you created the .xml files with Notepad then be sure to save the file in UTF-8 encoding. File + Save As, Encoding combobox.
For all those who still may face similar issue I think that I found the cause of this issue. It seems that copying folder with custom bootstrapper package (and all necessary files in it) does not "refreshes" the list of available packages. Only when i went through this walkthrough and manually created folder in %Programfiles%\Microsoft SDKs\Windows\v7.0A\Bootstrapper\Packages\ for sample package from this walkthrough my package has shown