KMS crashed with following error message:
(kurento-media-server:6421): GLib-CRITICAL **: g_error_free: assertion 'error != NULL' failed
^[[31;1mSegmentation fault^[[0m (thread ^[[33;1m140303257732864^[[0m, pid ^[[33;1m24975^[[0m)
GLib-GIO-CRITICAL **: g_socket_send_message: assertion 'G_IS_SOCKET (socket)' failed
Enviroment:
Version: 6.6.1
Found modules:
Module: 'core' version '6.6.1'
Module: 'elements' version '6.6.1'
Module: 'filters' version '6.6.1'
Server specs:
CPU: 2.4 Ghz
RAM: 30 Gb
There was 10-15 viewers and 4-6 presenters at this moment.
Hope this details will help to understand issue, thx.
Related
I'm new to kernel debugging, I'm trying to analyze the vmcore file using crash tool on RHEL 7. I'm trying to open the dump with below command.
crash /lib/debug/lib/modules/3.10.0-1160.80.1.el7.x86_64/vmlinux vmcore
but tools fails to load the vmcore with below error:
WARNING: kernel relocated [460MB]: patching 87472 gdb minimal_symbol values
crash: page excluded: kernel virtual address: ffffffffffffffff type: "possible"
WARNING: cannot read cpu_possible_map
crash: page excluded: kernel virtual address: ffffffffffffffff type: "present"
WARNING: cannot read cpu_present_map
crash: page excluded: kernel virtual address: ffffffffffffffff type: "online"
WARNING: cannot read cpu_online_map
crash: page excluded: kernel virtual address: ffffffffffffffff type: "active"
WARNING: cannot read cpu_active_map
WARNING: kernel version inconsistency between vmlinux and dumpfile
crash: page excluded: kernel virtual address: ffffffffffffffff type: "cpu_present_map"
crash: page excluded: kernel virtual address: ffffffffffffffff type: "cpu_present_map"
crash: cannot determine thread return address
WARNING: cannot determine pgdat list for this kernel/architecture
please wait... (gathering kmem slab cache data)
crash: invalid kernel virtual address: 1c type: "kmem_cache objsize/object_size"
Segmentation fault (core dumped)
I'm not sure this the vmcore file issue or crash tool issue. Can someone please help resolve this issue.
Thanks in advance
I am trying to install an old version of RabbitMQ using Chef (cookbook 'rabbitmq', '~> 5.8.5') and Kitchen, below my configuration:
Attributes
#Erlang
default['erlang']['install_method'] = 'source'
default['erlang']['source']['version']='R13B03'
default['erlang']['source']['checksum']='e7c46c8b2778f22064a3b369c1a1b572a1cc0e8a2198166858d4b9a1b488d662'
#RabbitMQ
default['rabbitmq']['erlang']['enabled'] = true
default['rabbitmq']['version'] = "3.4.4"
default['rabbitmq']['rpm_package'] ='rabbitmq-server-3.4.4-1.noarch.rpm'
Recipe:
include_recipe 'rabbitmq::default'
When I run kitchen converge, I am getting the following exception:
Running handlers:
[2020-08-22T22:20:07+00:00] ERROR: Running exception handlers
Running handlers complete
[2020-08-22T22:20:07+00:00] ERROR: Exception handlers complete
Chef Infra Client failed. 9 resources updated in 06 minutes 26 seconds
[2020-08-22T22:20:07+00:00] FATAL: Stacktrace dumped to /tmp/kitchen/cache/chef-stacktrace.out
[2020-08-22T22:20:07+00:00] FATAL: Please provide the contents of the stacktrace.out file if you file a bug report
[2020-08-22T22:20:07+00:00] FATAL: Mixlib::ShellOut::ShellCommandFailed: rpm_package[/tmp/kitchen/cache/rabbitmq-server-3.4.4-1.noarch.rpm] (rabbitmq::default line 224) had an error: Mixlib::ShellOut::ShellCommandFailed: Expected process to exit with [0], but received '1'
---- Begin output of ["rpm", "-i", "/tmp/kitchen/cache/rabbitmq-server-3.4.4-1.noarch.rpm"] ----
STDOUT:
STDERR: warning: /tmp/kitchen/cache/rabbitmq-server-3.4.4-1.noarch.rpm: Header V4 DSA/SHA1 Signature, key ID 056e8e56: NOKEY
error: Failed dependencies:
erlang >= R13B-03 is needed by rabbitmq-server-3.4.4-1.noarch
---- End output of ["rpm", "-i", "/tmp/kitchen/cache/rabbitmq-server-3.4.4-1.noarch.rpm"] ----
Ran ["rpm", "-i", "/tmp/kitchen/cache/rabbitmq-server-3.4.4-1.noarch.rpm"] returned 1
But when I logged in to the VM, I can see erlang is installed:
[vagrant#kitchen-rmq-server-centos-7 ~]$ erl
Erlang R13B03 (erts-5.7.4) [source] [64-bit] [rq:1] [async-threads:0] [hipe] [kernel-poll:false]
Eshell V5.7.4 (abort with ^G)
1>
And it is the same version required by RMQ (R13B03)
Any idea how to solve this issue?
Edit: to replicate the issue https://github.com/Proximator/chef-rmq
Firstly, we have to make sure erlang is installed by the rabbitmq cookbook, and not by any other means. This is the note found on Chef supermarket for rabbitmq cookbook:
The packages are cannot be installed alongside with other Erlang packages, for example, those from standard Debian repositories or Erlang Solutions.
To make sure that the Erlang cookbook is not used by rabbitmq::default
Also, there is a compatibility matrix of RabbitMQ and Erlang versions. RabbitMQ 3.7.0 being the lowest supported version, for which the lowest compatible Erlang version is 19.3.
There are zero dependency Erlang RPMs "just enough to run RabbitMQ" as documented here:
https://github.com/rabbitmq/erlang-rpm
For example - to install RabbitMQ 3.7.x with the compatible Erlang 19.3.x:
You should have these attributes:
default['rabbitmq']['erlang']['enabled'] = true
default['rabbitmq']['version'] = '3.7.6'
default['rabbitmq']['erlang']['yum']['baseurl'] = 'https://dl.bintray.com/rabbitmq-erlang/rpm/erlang/19/el/7'
default['rabbitmq']['erlang']['version'] = '19.3.6.13'
Then include below recipes:
include_recipe 'rabbitmq::erlang_package'
include_recipe 'rabbitmq::default'
I'm trying to start my rabbitmq server using command:sudo rabbitmq-server on ubuntu 20.04 but it crashes.I have absolutely no clue whatsoever as to what I should do.
Rabbitmq version: 3.8.5 erlang version: 23
17:41:07.587 [error]
17:41:07.591 [error] BOOT FAILED
BOOT FAILED
17:41:07.592 [error] ===========
===========
17:41:07.592 [error] ERROR: distribution port 25672 in use by rabbit#nadaanbaalak
ERROR: distribution port 25672 in use by rabbit#nadaanbaalak
17:41:07.592 [error]
17:41:08.594 [error] Supervisor rabbit_prelaunch_sup had child prelaunch started with rabbit_prelaunch:run_prelaunch_first_phase() at undefined exit with reason {dist_port_already_used,25672,"rabbit","nadaanbaalak"} in context start_error
17:41:08.594 [error] CRASH REPORT Process <0.153.0> with 0 neighbours exited with reason: {{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,"rabbit","nadaanbaalak"}}},{rabbit_prelaunch_app,start,[normal,[]]}} in application_master:init/4 line 138
{"Kernel pid terminated",application_controller,"{application_start_failure,rabbitmq_prelaunch,{{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,\"rabbit\",\"nadaanbaalak\"}}},{rabbit_prelaunch_app,start,[normal,[]]}}}"}
Kernel pid terminated (application_controller) ({application_start_failure,rabbitmq_prelaunch,{{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,"rabbit","nadaanbaalak"}}},{rabb
Crash dump is being written to: erl_crash.dump...done
Any help would be great
It's pretty simple. Just needed to look at the logs. killed the process at the port number "25672" and restarted the rabbitmq server.
I tried to run gem5 fs mode with KVM to fast forward linux boot-up and failed with this error.
info: 0x4b564d04: 0x0
info: 0x3b: 0x0
info: 0x6e0: 0x0
info: 0x1a0: 0x0
info: 0x17a: 0x0
info: 0x17b: 0x0
info: 0x9e: 0x0
panic: KVM: Failed to enter virtualized mode (hw reason: 0x80000021)
Memory Usage: 33878524 KBytes
Program aborted at tick 186932115
--- BEGIN LIBC BACKTRACE ---
gem5/build/X86/gem5.opt(_Z15print_backtracev+0x28)[0x15e45d8]
gem5/build/X86/gem5.opt(_Z12abortHandleri+0x46)[0x15f5196]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x11390)[0x7fb3c9f7d390]
/lib/x86_64-linux-gnu/libc.so.6(gsignal+0x38)[0x7fb3c8a72428]
/lib/x86_64-linux-gnu/libc.so.6(abort+0x16a)[0x7fb3c8a7402a]
gem5/build/X86/gem5.opt[0x80f14f]
gem5/build/X86/gem5.opt[0x18cb151]
gem5/build/X86/gem5.opt(_ZN10BaseKvmCPU13handleKvmExitEv+0x1bc)[0x18cb8bc]
gem5/build/X86/gem5.opt(_ZN10BaseKvmCPU4tickEv+0x229)[0x18c8d69]
gem5/build/X86/gem5.opt(_ZN10EventQueue10serviceOneEv+0xd5)[0x15eb485]
gem5/build/X86/gem5.opt(_Z9doSimLoopP10EventQueue+0x48)[0x160a9c8]
gem5/build/X86/gem5.opt[0x160ad1f]
/usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0xbd57f)[0x7fb3c93e557f]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x76ba)[0x7fb3c9f736ba]
/lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7fb3c8b4441d]
--- END LIBC BACKTRACE ---
I've used the gem5art and slightly modified the runscript not to run spec benchmark and run /bin/bash instead. It seems that this error has happened a while ago and issued in here. It seems that this problem has been fixed by the gem5 v19 but got the same error code. Could anyone explain why this error happens and how to fix it?
I just installed the Bazel plugin for IntelliJ, and I keep getting this exception:
com.google.idea.blaze.base.command.info.BlazeInfoException: blaze info failed with exit code: -1
java.util.concurrent.ExecutionException:
com.google.idea.blaze.base.command.info.BlazeInfoException: blaze info failed with exit code: -1
at com.google.common.util.concurrent.AbstractFuture.getDoneValue(AbstractFuture.java:502)
[...]
at com.google.idea.blaze.base.async.FutureUtil$Builder.lambda$run$0(FutureUtil.java:93)
[...]
at com.intellij.openapi.progress.impl.CoreProgressManager.lambda$runProcess$1(CoreProgressManager.java:170)
at com.intellij.openapi.progress.impl.CoreProgressManager.registerIndicatorAndRun(CoreProgressManager.java:548)
at com.intellij.openapi.progress.impl.CoreProgressManager.executeProcessUnderProgress(CoreProgressManager.java:493)
at com.intellij.openapi.progress.impl.ProgressManagerImpl.executeProcessUnderProgress(ProgressManagerImpl.java:94)
at com.intellij.openapi.progress.impl.CoreProgressManager.runProcess(CoreProgressManager.java:157)
at com.google.idea.blaze.base.async.executor.BlazeExecutor$3.call(BlazeExecutor.java:108)
at com.google.idea.blaze.base.async.executor.BlazeExecutor$3.call(BlazeExecutor.java:105)
[...]
Caused by: com.google.idea.blaze.base.command.info.BlazeInfoException: blaze info failed with exit code: -1
at com.google.idea.blaze.base.command.info.BlazeInfoRunnerImpl.runBlazeInfo(BlazeInfoRunnerImpl.java:105)
at com.google.idea.blaze.base.command.info.BlazeInfoRunnerImpl.lambda$runBlazeInfo$2(BlazeInfoRunnerImpl.java:75)
... 6 more
Edit: I am using IntelliJ 2017.3 on MacOS El Capitan 10.11.6, Java JRE 1.8.0, and the Bazel version is 0.8.1-homebrew (the plugin version is 2017.11.20.0.4). I get this error when I try to setup a new Java project (an Hello World with only one class and one BUILD file containing a java_binary similar to this tutorial), and it appears when I click on the Bazel sync button.
The output in the Bazel console is:
Syncing project: Sync (incremental)...
Updating VCS...
Running Bazel info...
Command: info --tool_tag=ijwb:IDEA:community --curses=no --color=no --experimental_ui=no --progress_in_terminal_title=no --
==== TIMING REPORT ====
Sync: 47ms
BazelInfo: 4ms
Timing summary:
BlazeInvocation: 4ms
Sync failed
Command: git diff --name-status --no-renames abc8913346474d12ad45226503438848011929ae
Does anybody have an idea about what is it and/or how to fix it? Thanks!
I found my answer, thanks to this post.
In IntelliJ > Settings > Other Settings > Bazel Settings, the field "Bazel binary location" was empty. For my case, I entered /usr/local/bin/bazel and now it works!