I am trying to compile the webRTC code but I get the following error.
I am not trying with Visual Studio.
The error got is <PATH>/src/buildtools/win/gn.exe cannot start because of incompatibility of 64 bit windows version. The confusion is I am compiling on Windows 7 64 bit. The error is confusing to say the least.
Steps followed are :-
Unzipping the depot_tools from the chromium webpage and setting up the correct path.
Then for downloading the webRTC and compilation the steps were
mkdir webrtc-checkout
cd webrtc-checkout
fetch --nohooks webrtc
gclient sync
gn gen out/Default < The problem arises here >
We would need the entire trace of all the python script to give you a full answer, but it is VERY likely that you need to have MSVC 2015 (14) installed and to set the corresponding environment variable DEPOT_TOOLS_WIN_TOOLCHAIN=0. The scripts will otherwise stop working with cryptic error messages, even before the compilation. It fits your "symptoms".
See this for more answers (chromium and webrtc build instructions are shared):
https://chromium.googlesource.com/chromium/src/+/master/docs/windows_build_instructions.md
If you copy paste the trace form the python scripts here, I might be able to help you more.
Related
I have a problem with communication with Atmega644P. I am using C232HM Cable and avrdude. Unfortunately, every attempt of communication ends with the following comment from the command prompt: avrdude: Error: no libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again. I installed following driver from Zadig 2.5: WinUSB (v6.1.7600.16385) and the error still occurs. What should I do?
To get past that error message, you have to do what it says: install the library that AVRDUDE needs and then build AVRDUDE from source in a way that it detects the library and uses it. But I am not sure exactly what you are trying to do and I cannot be sure that this will ultimately work for you. If you haven't built code from sourt before, it can be a challenge.
You never said how you installed AVRDUDE, but you might try downloading a binary version from a different place before you attempt to compile it yourself. The Arduino IDE comes with a version of AVRDUDE, and there is also an AVRDUDE package in MSYS2 (which I contributed).
I am facing error "The toolchain is unable to build a dummy C file" while building simple hello world application on cmd. I have Windows 10 64 bit machine.
I have installed all necessary tools and packages for Windows as per instructions on website (https://docs.zephyrproject.org/1.13.0/getting_started/installation_win.html) .
I have installed GNU ARM Embedded from the ARM developer website: (https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads)
I also tried to run on CMake GUI and got same error. Please advice .
I am attaching the screenshots below: Please advice. I have tried with other boards also like reel_board but still facing same issue.
CMDError
CMakeGUIError
CmakeErrorLog File
I am using python2.7 and trying to host my flask app on windows server. While installing mod_wsgi , the command prompt throws the below mentioned error
error: command 'C:\Users\USER\AppData\Local\Programs\Common\Microsoft\Visual C++ for Python\9.0\VC\Bin\link.exe' failed with exit status 1120
I tried reinstalling the visual C++ for python , but the error still persists. Any suggestions???
Please update your question with a more complete error log. You might even find something helpful by reading the error log more carefully -- The error is not in "Visual C++ for Python failing" but from the VC++ linker.
Also, instead of trying to configure mod_wsgi for Windows, you might find it easier to use wfastcgi. wfastcgi is maintained by Microsoft.
I have installed the standalone IDE for salesforce force.com platform. On trying to start the ide i am getting "JVM terminated. Exit Code=-1" error. Any idea what this error code means ?
This is a common loading error for force.com IDE.
There are different solutions. Try anyone of these:
A) Change the workspace location.
OR
B) (i). Install Eclipse 3.6 for Java Developers (Helios) from the link http://www.eclipse.org/downloads/packages/eclipse-ide-java-developers/heliossr2
Click your operating system from the window on your right.
(ii). Using the below link, follow the instructions to install Force.com IDE plugin for Eclipse 3.6 http://wiki.developerforce.com/page/Force.com_IDE_Installation_for_Eclipse_3.6
OR
C) In the default Force.com IDE install directory:
C:\Program Files\salesforce.com\Force.com IDE
Locate the config file:
forceide
And comment out the following at the end of the file (note the leading #):
#-vmargs
#-Dfile.encoding=UTF-8
#-Xms256m
#-Xmx1024m
#-XX:PermSize=128M
#-XX:MaxPermSize=512M
I hope it works now.
Cheers!
This could be because of various reasons. Say, if you do not have enough memory (RAM) as specified in config file(forceide.ini). As said in this link Force.com IDE – JVM terminated , probably reduce MaxPermSize in config file to say 256M and check.
This exact thing happened to me a few days ago.
My setup is:
Windows 7 64 bit
jre7 64 bit
Force.com IDE 64 bit
When I ran the java auto update to update my jre it installed the 32 bit version (a whole other gripe). So I manually downloaded the 64 bit version of the jre installed it over the top of the 32 bit version and the IDE started working again.
I have been using SimpleOpenNI, a wrapper for Processing, all summer now. I use it for the Kinect to make games and demos. Last week, I have been getting a fatal error in my processing window and none of the SimpleOpenNI projects will work. Here is the error:
SimpleOpenNI Version 0.20
A fatal error has been detected by the Java Runtime Environment:
EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x72e8f955, pid=4596, tid=4624
JRE version: 6.0_24-b07
Java VM: Java HotSpot(TM) Client VM (19.1-b02 mixed mode windows-x86 )
Problematic frame:
C [OpenNI.dll+0xf955]
An error report file with more information is saved as:
C:\Users\mss042\Desktop\processing-1.5.1\hs_err_pid4596.log
If you would like to submit a bug report, please visit:
http://java.sun.com/webapps/bugreport/crash.jsp
The crash happened outside the Java Virtual Machine in native code.
See problematic frame for where to report the bug.
It appears as if the new OpenNI/NITE/SensorKinect drivers do not work with the SimpleOpenNI wrapper. I have tried it with people using the old drivers and everything still works. Problem is, you cannot download the old drivers off of the websites so I cannot test if it's that or not. You can see everything I've downloaded from the simpleopenni site: http://code.google.com/p/simple-openni/
Any help with this error would be appreciated. Thanks.
Mike
It looks like there's a problem with OpenNI.dll. Make sure that:
You have the dll (It should be in Program Files where you've installed OpenNI)
Make sure you've got the Environment Variables for the Open NI paths and that the paths are correct, otherwise, you might have the .dll file, but the .jnilib wouldn't know where it is.
Had a Kinect Workshop in Uni, and my colleagues using Windows all had issues with the drivers,
so I'm just passing on what they did:
Even though they had 64-bit versions of Windows they used the 32-bit version, and used Brekel OpenNI Kinect Auto Installer - Developer Edition v1.3.2.3.exe(direct link via developkinect.com) after reading this message:
Comment 4 by tijmenva...#gmail.com, Oct 21, 2011 Hey all I have Solved
the unsatisfied link dll error on windows 7 64 bits by installing java
runtime (jre-7u1-windows-i586.exe)and (Brekel OpenNI Kinect Auto
Installer - Developer Edition v1.3.2.3.exe) I uninstalled everything
and than it worked :)
hope this helpes
in Issue#17 on the SimpleOpenNI project issues page.
Another colleague used Synapse and OSC in Processing instead of SimpleOpenNI, but she had loads of errors with the drivers (basically spent a few good hours uninstalling/installing different versions). In her case, uninstalling any previous partial or complete drivers from the machine and deleting any registry entries related to PrimeSense(Sensor, Nite) and OpenNI, then using the installers from the links on the Synapse page, worked for her.
HTH
This is a long shot, but that exact error is also given if the Kinect USB and/or power supply simply becomes unplugged. Thought it was worth mentioning as it is not obvious from the error message itself and it may help someone out if they kicked their power supply and started searching for the above exception :)