In Sitecore.NET 8.1 (rev. 160519) + Web Forms for Marketers 8.1.rev. 160523,
We are getting problem into executeing WFFM Custom Save Action in CD environment with Submitting form with image. If we do not upload any image and submit the forms, WFFM Custom Save Action work fine. In CM sever form is submitting perfectly with/without image.
TO Fix the Issues i trying following thing :-
I followed this article but in CD server when I add "remoteWfmService" in connectionStrings.config I gets error "The entry 'remoteWfmService' has already been added". Also instead forms.config we have sitecoreforms.config there already we have this setting
Sitecore Web forms for marketers 2.4 file upload on content delivery server error (WFFM)
I tried this article as well by enabling the Clint Action checkbox true but no luck .
http://sitecorecode.com/index.php/2016/05/23/wffm-custom-save-action-not-woking-on-cd-environment/
In Log file I got this entry against my Save Action Item ID
WARN [WFFM] Could not find configuration node: databases/database[#id='master']
WFFM form submit action will upload the file on Master database Media library.
As you are on CD server, so WFFM form will not get Master database and hence you are getting error "Could not find configuration node: databases/database[#id='master']".
For this you should configure WFFM CD modules which comes in ZIP file with name "Web Forms for Marketers CD 8.0 rev.zip". So you have to unzip this and manually paste the WFFM config and DLL files on your CD server.
Also check the presence of SwitchMasterToWeb.config file in App_Config\Include folder on your CD server. It must be there.
I hope this will work for you.
Related
Googles documentation on installing the library, found here: https://github.com/googleads/googleads-php-lib/blob/master/README.md#getting-started, instructs us to copy adsapi_php.ini, as constructed here: https://github.com/googleads/googleads-php-lib/blob/master/examples/AdWords/adsapi_php.ini, to your home directory.
I filled out the necessary variables in the .ini, and I am using docker so I have placed this file inside my container at /var/www/home/node/ and when I run the command composer require googleads/googleads-php-lib I am given the following error in the command prompt:
Your requirements could not be resolved to an installable set of packages.
Problem 1
- Installation request for googleads/googleads-php-lib ^37.1 -> satisfiable by googleads/googleads-php-lib[37.1.0].
- googleads/googleads-php-lib 37.1.0 requires ext-soap * -> the requested PHP extension soap is missing from your system.
To enable extensions, verify that they are enabled in your .ini files:
- /usr/local/etc/php/php.ini
- /usr/local/etc/php/conf.d/adsapi_php.ini
- /usr/local/etc/php/conf.d/docker-php-ext-pdo_pgsql.ini
- /usr/local/etc/php/conf.d/docker-php-ext-sodium.ini
- /usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini
You can also run `php --ini` inside terminal to see which files are used by PHP in CLI mode.
Installation failed, reverting ./composer.json to its original content.
I assumed the issue was my adsapi_php.ini was simply in the wrong location as it contains what I believe is necessary to avoid the above issue, but I have tried placing it in several different places and yet I always get the same error.
Any help would be appreciated!
Just try to edit php.ini inside docker (docker exec -t {container} bashand enable there the extenstion soap
I want to add some content to kitchen order, and I can't find the proper file to change from.
I'm using odoo 10 in Ubuntu server which I have access to by SSH
its just simple as it is the file link is ( if you're using odoo10 community)
XML file path :
/usr/lib/python2.7/dist-packages/odoo/addons/pos_restaurant/static/src/xml/multiprint.xml
JS file path :
/usr/lib/python2.7/dist-packages/odoo/addons/pos_restaurant/static/src/js/multiprint.js
than go and change what ever you want to
remember sometimes you have to restart your odoo service to ensure that changes are in place
The documantion mention that there is a way to develop entire project localy and then upload it to back& platform for production. how can it be done?
There is sample code somewhere ?
thanks
The server side in Back& can be built with cloud JavaScript or with node.js.
Using Backand CLI and node.js you can develop any project in node.js and upload it.
The steps are simple:
Create new action with "Server side node.js code"
Run the action.init command (copy paste from the action page)
Use the backand shell project to build the node.js project
Run action.deploy command to upload and run the code on the server
for debug node.js localy :
first make sure you have action defind in the back& site under the section objects/[objectName]/action
example:
project name: MyApp
with object call: Users
with the action files (for upload a images file)
so
In local terminal
1. go to project's root folder.
2. type backand login and follow the instraction (email & password).
3. type backand action init and follow the instration.
project name : MyApp,
object name : Users,
action name : files
to be continue...
I'm attempting to install and use MSYS2 (just getting started with it). I used the installer msys2-x86_64-20150916.exe and that seemed to go fine. Following the install directions, I ran both the update-core script and package database sync. Both fail. I show some of the output of the update core script below. The database sync fails for same "filename too long" reasons.
==> Update package databases...
:: Synchronizing package databases...
downloading mingw32.db...
downloading mingw32.db...
downloading mingw32.db...
downloading mingw32.db...
downloading mingw32.db...
error: could not open file /var/lib/pacman/sync/process?a=-3-lqCLzXmOVMGhdCngyCV4_GayxZ9J_5BY5vi5g3cT8TnaVOyHNkP3i0c8d5C4blqAp5pNlE0ed_vEU-kPSDHKOg&b=PPNTxJgmwuDT5DPf_2sovf-m6J5IoL2zxXU84ePhgAUcZBDyVD_v4wfG6xGP3FZCi8b3EStJPpKrKU8ykIp4uPYrbGFuUlsd-FOf5alMDNO2Olf-YFTsRpUe24Yfq_ATwekjooJm-B-XXCVQ1YAE-3RUWx6oUzFYRJU02LpZIsToFNPuxq-KAou5Jn0dv8rnnKahdjG5tC2rTNNj4gWmj4P_9EX4TcaNgFcSKXzudqLljMnXiamdT4NGmqOPl_cDHrPSnLGDHLWoQHEqx1lL22LYPuzY135OpobhnKym1KM1DLksJiU3U9CwbJ7-2dUD2k1mXjQYV6qGC0I6VRGIkmjkOUCiGsiLMlz-OnHKs_CgI0NyreR38yFPfW6pnW4skarOGfYj0p9pp2MMCMeXtQF6XDDZs3Hah8QoEBL8ZQjD9pArAbk34E9jUIgJXG4I&blockedUrl=http%3A%2F%2Frepo.msys2.org%2Fmingw%2Fi686%2Fmingw32.db.sig.part: File name too long
...
==> Checking if there are critical packages to upgrade.
error: could not open file /var/lib/pacman/sync/mingw32.db: Unrecognized archive format
...
I am running on Windows 7 Enterprise.
Let's look at that long filename more carefully. Here is an excerpt from it:
blockedUrl=http%3A%2F%2Frepo.msys2.org%2Fmingw%2Fi686%2Fmingw32.db.sig
It looks like you are behind some sort of firewall or censoring software that is blocking a download. You should see if you can download http://repo.msys2.org/mingw/i686/mingw32.db.sig in a normal web browser. If not, then you can report the problem to your system administrator and ask them to unblock repo.msys2.org.
When you test the download, make sure that you are able to download the file without clicking through any interstitial web pages, because the MSYS2 software will not be able to do that. You should be able to just click on the link above and it should directly download the file.
We have a server PC and other client PCs working connected to server using LAN. We have a application for our internal use which is developed using VB.Net. I used steps in http://www.codeproject.com/Articles/17003/ClickOnce-Quick-steps-to-Deploy-Install-and-Update to deploy clickone statergy for updating our application.After publishing while installing application,this error is coming
I searched i details and found this error
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of D:\Desktop\publish\Global.application resulted in exception. Following failure messages were detected:
+ Downloading file:///D:/Desktop/publish/Application Files/Global_1_0_0_0/Global.XmlSerializers.dll.deploy did not succeed.
+ Could not find file 'D:\Desktop\publish\Application Files\Global_1_0_0_0\Global.XmlSerializers.dll.deploy'.
+ Could not find file 'D:\Desktop\publish\Application Files\Global_1_0_0_0\Global.XmlSerializers.dll.deploy'.
+ Could not find file 'D:\Desktop\publish\Application Files\Global_1_0_0_0\Global.XmlSerializers.dll.deploy'.
I have checked Application files in publish options and Global.XmlSerializers.dll is included. Anyone know why this is happening?
Is there any way to copy some extra files to installation folder(C:\Users\name\AppData\Local\Apps..) when installing or updating clickone application? Because we use some outside support files for our application. Is it possible?
Is there any way to pass argument to clickone application short cut,like passing argument to .exe shortcut("\Global.exe" ?/?customer?/?)?
EDIT:
This is how I published
I checked by giving network path for publishing folder location.But same error coming.
Here is application files included
As you can see Global.XmlSerializers.dll is included
It is looking for a file on the D: drive. It is unlikely that your users all have their D drive mapped to the same location. When you publish you should use the full path rather than mapped drive letters.
//Servername/shareddirectory/appdirectory
Does the install work for you?
Well, there no magic involved in ClickOnce: you can just look into the deployment folder - is the required file there or not?
If not, you need to change the settings in the Publish options for the required file. This message - in my experience - is always a sign that one of the required assemblies has not been published.
In addition it seems that you published to a mapped network drive instead of publishing to an UNC path. You need to publish to a path following the \\server\name\ scheme.
When I have used the wizard and deployed to a network share, in the Publish Wizard:
Specify the location to publish this application:
UDP Path
Click Next
How will users install the application?
From a UNC path of file share
Specify the UNC path:
The same UDP Path (copy pasted from before)