We have a server PC and other client PCs working connected to server using LAN. We have a application for our internal use which is developed using VB.Net. I used steps in http://www.codeproject.com/Articles/17003/ClickOnce-Quick-steps-to-Deploy-Install-and-Update to deploy clickone statergy for updating our application.After publishing while installing application,this error is coming
I searched i details and found this error
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of D:\Desktop\publish\Global.application resulted in exception. Following failure messages were detected:
+ Downloading file:///D:/Desktop/publish/Application Files/Global_1_0_0_0/Global.XmlSerializers.dll.deploy did not succeed.
+ Could not find file 'D:\Desktop\publish\Application Files\Global_1_0_0_0\Global.XmlSerializers.dll.deploy'.
+ Could not find file 'D:\Desktop\publish\Application Files\Global_1_0_0_0\Global.XmlSerializers.dll.deploy'.
+ Could not find file 'D:\Desktop\publish\Application Files\Global_1_0_0_0\Global.XmlSerializers.dll.deploy'.
I have checked Application files in publish options and Global.XmlSerializers.dll is included. Anyone know why this is happening?
Is there any way to copy some extra files to installation folder(C:\Users\name\AppData\Local\Apps..) when installing or updating clickone application? Because we use some outside support files for our application. Is it possible?
Is there any way to pass argument to clickone application short cut,like passing argument to .exe shortcut("\Global.exe" ?/?customer?/?)?
EDIT:
This is how I published
I checked by giving network path for publishing folder location.But same error coming.
Here is application files included
As you can see Global.XmlSerializers.dll is included
It is looking for a file on the D: drive. It is unlikely that your users all have their D drive mapped to the same location. When you publish you should use the full path rather than mapped drive letters.
//Servername/shareddirectory/appdirectory
Does the install work for you?
Well, there no magic involved in ClickOnce: you can just look into the deployment folder - is the required file there or not?
If not, you need to change the settings in the Publish options for the required file. This message - in my experience - is always a sign that one of the required assemblies has not been published.
In addition it seems that you published to a mapped network drive instead of publishing to an UNC path. You need to publish to a path following the \\server\name\ scheme.
When I have used the wizard and deployed to a network share, in the Publish Wizard:
Specify the location to publish this application:
UDP Path
Click Next
How will users install the application?
From a UNC path of file share
Specify the UNC path:
The same UDP Path (copy pasted from before)
Related
enter image description hereThe Path Error I have Got
Getting Path error when running C# Code through TFS , Not able to find CSV path from which we are picking data for Execution
Note: Deploying & Running Code through Virtual Machine
First, please try to build your code manually on the Virtual Machine to see if it works.
Second, double check if the path and the file exists on your virtual machine.
Third, ensure that the "Project Collection Build Service Accounts" group and "Project Build Service (TEAM FOUNDATION)" user have appropriate version control rights, such as Read and Label. Make sure that Inheritance is set to On. Usually the get path error may related to a permission issue.
I'm trying to publish a relatively new ASP.NET site to azure appservice from Visual Studio.
I'm getting the following error message during the preview:
The "Dnu" task failed unexpectedly.
System.Exception:
Microsoft .NET Development Utility Clr-x86-1.0.0-rc1-16231
Copying to output path C:\Users*****\AppData\Local\Temp\PublishTemp*****************.********.WebApi114
Error: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
at Microsoft.DNX.Tasks.Dnu.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.d__26.MoveNext()
Path is long indeed. How do I fix it?
Error is from windows file API, not control by Azure App Service. Sadly I think you will have to find a way to shorter your file path in order to fix this issue.
I was running into the same issue trying to build an Angular2 app locally. So I tend to agree with Xiaomin that it may be a local issue. What worked for me was to run the dnu publish command from a command prompt with the output flag set with a shorter folder destination provided. For example, navigate to the location of the project you want to publish in a command prompt and type:
"dnu publish --runtime active -o c:\Sample"
The above command will post your output to c:\Sample.
You can interrogate the options as follows:
"dnu -help"
"dnu publish -help"
I am currently trying to build a Resource DLL on on Windows Server 2003 and 2008. I am currently working with the Resource DLL code samples supplied with the Windows SDKs, and I can't get them to work.
On Windows Server 2008 I succeeded compiling the Windows 7 SDK ClipBook Server sample, but couldn't get it to properly work in the cluster. When I insert the resource as a resource type to the cluster using "cluster restype /create /dll" it works, but the resource is listed with an unknown type instead of a ClipBook Server type, as I think it should have as it is the type defined in the Resource DLL's code.
I also succeed in creating a resource of that type, but I can never get it to go Online. I always get the error:
System error 5079 has occurred (0x000013d7).
The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node.
And this is despite the fact that the resource is located on all the nodes in the cluster including the one I try to start the resource on.
On Windows Server 2003, I'm working with the Platform SDK version 5.2, and I can't even get the ClipBook Server Resource DLL code sample to compile. I always get MIDL1001 Error saying that it cannot open the file cluscfgserver.idl. I added the path of the file's location to the include path of the project. That didn't work. When I tried to hard-code the path of the file, I got several linker errors when trying to link with this file.
If anyone knows anything about any of these problems, I would appreciate any input.
Those examples are old and busted. Here are a few things I had to go through to get the similar "File Share Sample" to work:
Convert the project to x64 (supposedly 32 bit resources still work, but I haven't been able to verify that)
Add the module definition file (.def) to the linker input property page so that the Startup function is exposed
There were several spots in code where CompareString is used to check the resource type name and 0 is expected on success, but it actually returns CSTR_EQUAL (3).
This is probably why you get the "(Unknown Type)" name.
To register the resource extension, cluster.exe won't accept spaces in the dll name, so in my case I had to use cluster /REGADMINEXT:'FILESH~2.dll'
Only the Property Sheet extension interface is supported, everything else (context menu, wizards) has been removed as of Server 2008
Check the extension DLL stdafx.cpp sources for the Resource Type "ClipBook Server". It should be "ClipBook Server Sample": const WCHAR g_wszResourceTypeNames[] = L"ClipBook Server Sample\0"
I tried everything I could think of, but I always get this error when I try to start the Apache FtpServer service.
Windows could not start the Apache FtpServer on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 0.
Has anyone got Apache FtpServer to function as a Windows service in Windows 7 or even Windows Vista?
Note:
My Java_HOME environment variable is set as c:\java and I have a symbolic link, linking this directory to the longer C:\Program Files\Java\jdk1.6.0_17.
I also have another symbolic link pointing c:\ftp to the longer C:\Program Files (x86)\Apache Software Foundation\apache-ftpserver-1.0.3.
The only reason I did any of this in the first place is because I was reading that some people were having problems with spaces or long path names, but I tried physically moving the directories as well, all with the same error.
I had the same issue today using apache ftpser 1.0.5., the error message was "Failed installing 'ftpd' service".
The solution was to start the DOS command shell as "Administrator".
i am using trk for phone debug
it is working properly for Helloworld project
but it is showing error for my project when i start project in phone debug mode
1)Load failed
2)TrkProtocolPlugin:failed to download specified file to target
(please verify that target path is writable)
if any body understand what problem i am facing plz help me out from this problem
Thanks in advance
In your case, I would check:
if the application has correct privileges assigned (along with appropriate certificate)
if ID of the application is not in conflict with some other application on device
if installation package does not contain problematic commands (e.g. copy commands to non-accessible directories)
Can you manually install the application on the phone? That is the first test you must perform before even attempting to use TRK.
Also, can your application start, at least to the point of showing a panic? TRK cannot help you if the applications cannot even load its DLL dependencies due to for example Platform Security capability mismatch. TRK needs a process to attach too in order to do its job ...