I have a created a stored procedure (please ignore syntax errors)
alter proc usp_newServerDetails
(#appid int, #envid int, #serType varchar(20), #servName varchar(20))
as
declare #oTbl_sd table (ID int)
declare #outID1
declare #oTbl_cd table (ID int)
declare #outID2
begin Transaction
insert into server_details(envid, servertype, servername)
output inserted.serverid into #oTbl_sd(ID)
values(#envid, #serType, #servName)
select #outID1 = ID from #oTbl_sd
insert into configdetails(serverid, servertype, configpath, configtype)
output inserted.configid into #oTbl_cd(ID)
(select #outID1, cm.servertype, cm.configpath, cm.configtype
from configpthmaster cm
where cm.appid = #appid )
select #outID2 = ID from #oTbl_cd
insert into configkeydetails(confiid, keyname)
output inserted.Keyid into #oTbl_ckd(ID)
(select #outID2, cm.key
from configpthmaster cm
where cm.appid = #appid)
begin
commit
end
server_details table has an identity column ID with is auto-generated ie. #outID1 and first insert query inserts only 1 row.
configpthmaster table is not related to any other table directly and has 2 unique data rows, which I want to fetch to insert data into other tables, one by one during insertion.
The second insert query fetch data from configpthmaster table
and insert 2 rows in configdetails while generating (auto-generated) ID ie. #outID2.
It also has a FK mapped to server_details.
The problem is "#outID2" giving last inserted ID only (ie. if two id generated 100,101 i am getting 101) which eventually on 3rd insertion, inserting 2 rows with same id 101 only but i want the insertion should be linear. i.e one for 100 and other for 101.
If zero rows affected while insertion how to rollback the transaction?
How can I achieve these requirements? Please help.
Change your procedure like below,and try again.
ALTER PROCEDURE usp_newServerDetails(#appid int, #envid int,#serType varchar(20),#servName varchar(20))
AS
BEGIN
BEGIN TRY
DECLARE #Output TABLE (ID int,TableName VARCHAR(50),cmKey VARCHAR(50)) --table variable for keeping Inserted ID's
BEGIN TRAN
IF EXISTS ( SELECT 1 FROM configpthmaster cm WHERE cm.appid = #appid )
AND ( SELECT 1 FROM configkeydetails ck WHERE ck.appid = #appid ) --add a conditon to satisfy the valid insertions
BEGIN
INSERT INTO server_detials(envid,servertype,servername)
OUTPUT inserted.serverid,'server_detials',NULL INTO #Output(ID,TableName,cmKey )
VALUES(#envid ,#serType ,#servName)
INSERT INTO configdetails(serverid,servertype,configpath,configtype)
OUTPUT inserted.configid,'configdetails',cm.Key INTO #Output(ID,TableName,cmKey )
SELECT t.ID,cm.servertype,cm.configpath,cm.configtype
FROM configpthmaster cm
CROSS APPLY (SELECT ID FROM #Output WHERE TableName='server_detials')t
WHERE cm.appid = #appid
INSERT INTO configkeydetails(configId,keyname)
SELECT ID,cmKey FROM #Output
WHERE TableName='configdetails'
END
COMMIT TRAN
END TRY
BEGIN CATCH
IF ##TRANCOUNT > 0
ROLLBACK
END CATCH
END
Could you try this solution?
alter proc usp_newServerDetails(#appid int, #envid int,#serType varchar(20),#servName varchar(20))
as
declare #oTbl_sd table (ID int)
declare #outID1
declare #oTbl_cd table (ID int)
declare #outID2
begin Transaction
insert into server_detials(envid,servertype,servername)
output inserted.serverid into #oTbl_sd(ID)
values(#envid ,#serType ,#servName)
select #outID1 = ID from #oTbl_sd
insert into configdetails(serverid,servertype,configpath,configtype)
output inserted.configid into #oTbl_cd(ID)
(select #outID1 ,cm.servertype,cm.configpath,cm.configtype from configpthmaster cm where cm.appid = #appid )
select #outID2 = ID from #oTbl_cd
insert into configkeydetails(confiid,keyname)
output inserted.Keyid into #oTbl_ckd(ID)
(select isnull(replace(stuff((SELECT inserted.configid FOR xml path('')), 1, 1, ''), '&', '&'), '') ,cm.key, from configpthmaster cm where cm.appid = #appid )
begin
commit
end
I just added STUFF in your code.
The STUFF function inserts a string into another string.
Do take note that using STUFF drastically slows the processing time of the code.
for more information about STUFF
Related
We have DVD Rental company. In this particular scenario we consider only Member, Rental and Membership tables.
The task is to write a trigger that prevents a customer from being shipped a DVD
if they have reached their monthly limit for DVD rentals as per their membership contract using the function.
My trigger leads to infinite loop. It works without While loop, but then it does not work properly, if I consider multiple updates to the Rental table. Where I am wrong?
-- do not run, infinite loop
CREATE OR ALTER TRIGGER trg_Rental_StopDvdShip
ON RENTAL
FOR UPDATE
AS
BEGIN
DECLARE #MemberId INT
DECLARE #RentalId INT
SELECT * INTO #TempTable FROM inserted
WHILE (EXISTS (SELECT RentalId FROM #TempTable))
BEGIN
IF UPDATE(RentalShippedDate)
BEGIN
IF (SELECT TotalDvdLeft FROM dvd_numb_left(#MemberId)) <= 0
BEGIN
ROLLBACK
RAISERROR ('YOU HAVE REACHED MONTHLY LIMIT FOR DVD RENTALS', 16, 1)
END;
END;
DELETE FROM #TempTable WHERE RentalID = #RentalId
END;
END;
My function looks as follows:
CREATE OR ALTER FUNCTION dvd_numb_left(#member_id INT)
RETURNS #tab_dvd_numb_left TABLE(MemberId INT, Name VARCHAR(50), TotalDvdLeft INT, AtTimeDvdLeft INT)
AS
BEGIN
DECLARE #name VARCHAR(50)
DECLARE #dvd_total_left INT
DECLARE #dvd_at_time_left INT
DECLARE #dvd_limit INT
DECLARE #dvd_rented INT
DECLARE #dvd_at_time INT
DECLARE #dvd_on_rent INT
SET #dvd_limit = (SELECT Membership.MembershipLimitPerMonth FROM Membership
WHERE Membership.MembershipId = (SELECT Member.MembershipId FROM Member WHERE Member.MemberId = #member_id))
SET #dvd_rented = (SELECT COUNT(Rental.MemberId) FROM Rental
WHERE CONCAT(month(Rental.RentalShippedDate), '.', year(Rental.RentalShippedDate)) = CONCAT(month(GETDATE()), '.', year(GETDATE())) AND Rental.MemberId = #member_id)
SET #dvd_at_time = (SELECT Membership.DVDAtTime FROM Membership
WHERE Membership.MembershipId = (SELECT Member.MembershipId FROM Member WHERE Member.MemberId = #member_id))
SET #dvd_on_rent = (SELECT COUNT(Rental.MemberId) FROM Rental
WHERE Rental.MemberId = #member_id AND Rental.RentalReturnedDate IS NULL)
SET #name = (SELECT CONCAT(Member.MemberFirstName, ' ', Member.MemberLastName) FROM Member WHERE Member.MemberId = #member_id)
SET #dvd_total_left = #dvd_limit - #dvd_rented
SET #dvd_at_time_left = #dvd_at_time - #dvd_on_rent
IF #dvd_total_left < 0
BEGIN
SET #dvd_total_left = 0
SET #dvd_at_time_left = 0
INSERT INTO #tab_dvd_numb_left(MemberId, Name, TotalDvdLeft, AtTimeDvdLeft)
VALUES(#member_id, #name, #dvd_total_left, #dvd_at_time_left)
RETURN;
END
INSERT INTO #tab_dvd_numb_left(MemberId, Name, TotalDvdLeft, AtTimeDvdLeft)
VALUES(#member_id, #name, #dvd_total_left, #dvd_at_time_left)
RETURN;
END;
Will be glad for any advice.
Your main issue is that even though you populate #TempTable you never pull any values from it.
CREATE OR ALTER TRIGGER trg_Rental_StopDvdShip
ON RENTAL
FOR UPDATE
AS
BEGIN
DECLARE #MemberId INT, #RentalId INT;
-- Move test for column update to the first test as it applies to the entire update, not per row.
IF UPDATE(RentalShippedDate)
BEGIN
SELECT * INTO #TempTable FROM inserted;
WHILE (EXISTS (SELECT RentalId FROM #TempTable))
BEGIN
-- Actually pull some information from #TempTable - this wasn't happening before
SELECT TOP 1 #RentalID = RentalId, #MemberId = MemberId FROM #TempTable;
-- Select our values to its working
-- SELECT #RentalID, #MemberId;
IF (SELECT TotalDvdLeft FROM dvd_numb_left(#MemberId)) <= 0
BEGIN
ROLLBACK
RAISERROR ('YOU HAVE REACHED MONTHLY LIMIT FOR DVD RENTALS', 16, 1)
END;
-- Delete the current handled row
DELETE FROM #TempTable WHERE RentalID = #RentalId
END;
-- For neatness I always drop temp tables, makes testing easier also
DROP TABLE #TempTable;
END;
END;
An easy way to debug simply triggers like this is to copy the T-SQL out and then create an #Inserted table variable e.g.
DECLARE #Inserted table (RentalId INT, MemberId INT);
INSERT INTO #Inserted (RentalId, MemberId)
VALUES (1, 1), (2, 2);
DECLARE #MemberId INT, #RentalId INT;
-- Move test for column update to the first test as it applies to the entire update, not per row.
-- IF UPDATE(RentalShippedDate)
BEGIN
SELECT * INTO #TempTable FROM #inserted;
WHILE (EXISTS (SELECT RentalId FROM #TempTable))
BEGIN
-- Actually pull some information from #TempTable - this wasn't happening before
SELECT TOP 1 #RentalID = RentalId, #MemberId = MemberId FROM #TempTable;
-- Select our values to its working
SELECT #RentalID, #MemberId;
-- IF (SELECT TotalDvdLeft FROM dvd_numb_left(#MemberId)) <= 0
-- BEGIN
-- ROLLBACK
-- RAISERROR ('YOU HAVE REACHED MONTHLY LIMIT FOR DVD RENTALS', 16, 1)
-- END;
-- Delete the current handled row
DELETE FROM #TempTable WHERE RentalID = #RentalId
END;
-- For neatness I always drop temp tables, makes testing easier also
DROP TABLE #TempTable;
END;
Note: throw is the recommended way to throw an error instead of raiserror.
Another thing to consider is that you must try to transform your UDF into an inline TVF because of some side effects.
Like this one:
CREATE OR ALTER FUNCTION dvd_numb_left(#member_id INT)
RETURNS TABLE
AS
RETURN
(
WITH
TM AS
(SELECT Membership.MembershipLimitPerMonth AS dvd_limit,
Membership.DVDAtTime AS dvd_at_time,
CONCAT(Member.MemberFirstName, ' ', Member.MemberLastName) AS [name]
FROM Membership AS MS
JOIN Member AS M
ON MS.MembershipId = M.MembershipId
WHERE M.MemberId = #member_id
),
TR AS
(SELECT COUNT(Rental.MemberId) AS dvd_rented
FROM Rental
WHERE YEAR(Rental.RentalShippedDate ) = YEAR(GETDATE)
AND MONTH(Rental.RentalShippedDate ) = MONTH(GETDATE)
AND Rental.MemberId = #member_id
)
SELECT MemberId, [Name],
CASE WHEN dvd_limit - dvd_rented < 0 THEN 0 ELSE dvd_limit - dvd_rented END AS TotalDvdLeft,
CASE WHEN dvd_limit - dvd_rented < 0 THEN 0 ELSE dvd_at_time - dvd_on_rent END AS AtTimeDvdLeft
FROM TM CROSS JOIN TR
);
GO
Which will be much more efficient.
The absolute rule to have performances is: TRY TO STAY IN A "SET BASED" CODE instead of iterative code.
The above function can be optimized by the optimzer whilet yours cannot and will needs 4 access to the same tables.
I'm trying to generate dummy data from the existing data I have in the tables. All I want is to increase the number of records in Table1 to N specified amount. The other tables should increase based on the foreign key references.
The tables has one to many relationship. For one record in table 1, I can have multiple entries in table 2, and in table 3 I can have many records based on IDs of the second table.
Since IDs are primary keys, I either capture it by
SET #NEWLY_INSERTED_ID = SCOPE_IDENTITY()
after inserting to table 1 and using in insert for table2, or inserting them to temp table and joining them to achieve the same results for table 3.
Here's the approach I'm taking with the CURSOR.
DECLARE #MyId as INT;
DECLARE #myCursor as CURSOR;
DECLARE #DESIRED_ROW_COUNT INT = 70000
DECLARE #ROWS_INSERTED INT = 0
DECLARE #CURRENT_ROW_COUNT INT = 0
DECLARE #NEWLY_INSERTED_ID INT
DECLARE #LANGUAGE_PAIR_IDS TABLE ( LangugePairId INT, NewId INT, SourceLanguage varchar(100), TargetLangauge varchar(100) )
WHILE (#ROWS_INSERTED < #DESIRED_ROW_COUNT)
BEGIN
SET #myCursor = CURSOR FOR
SELECT Id FROM MyTable
SET #CURRENT_ROW_COUNT = (SELECT COUNT(ID) FROM MyTable)
OPEN #myCursor;
FETCH NEXT FROM #myCursor INTO #MyId;
WHILE ##FETCH_STATUS = 0
BEGIN
IF ((#CURRENT_SUBMISSION_COUNT < #DESIRED_ROW_COUNT) AND (#ROWS_INSERTED < #DESIRED_ROW_COUNT))
BEGIN
INSERT INTO [dbo].[MyTable]
([Column1]
([Column2]
([Column3]
)
SELECT
,convert(numeric(9,0),rand() * 899999999) + 100000000
,COlumn2
,Colum3
FROM MyTable
WHERE Id = #MyId
SET #NEWLY_INSERTED_ID = SCOPE_IDENTITY()
INSERT INTO [dbo].[Language]
([MyTable1Id]
,[Target]
,[Source]
OUTPUT inserted.Id, inserted.MyTable1Id, inserted.Source, inserted.[Target] INTO #LANGUAGE_PAIR_IDS (LangugePairId, NewId, SourceLanguage, TargetLangauge)
SELECT
#NEWLY_INSERTED_ID
,[Target]
,[Source]
FROM [dbo].[Language]
WHERE MyTableId = #MyId
ORDER BY Id
DECLARE #tbl AS TABLE (newLanguageId INT, oldLanguageId INT, sourceLanguage VARCHAR(100), targetLanguage VARCHAR(100))
INSERT INTO #tbl (newLanguageId, oldLanguageId, sourceLanguage, targetLanguage)
SELECT 0, id, [Source], [Target] MyTable1Id FROM Language WHERE MyTable1Id = #MyId ORDER BY Id
UPDATE t
SET t.newlanguageid = lp.LangugePairId
FROM #tbl t
JOIN #LANGUAGE_PAIR_IDS lp
ON t.sourceLanguage = lp.SourceLanguage
AND t.targetLanguage = lp.TargetLangauge
INSERT INTO [dbo].[Manager]
([LanguagePairId]
,[UserId]
,[MyDate])
SELECT
tbl.newLanguageId
,p.[UserId]
,p.[MyDate]
FROM Manager m
INNER JOIN #tbl tbl
ON m.LanguagePairId = tbl.oldLanguageId
WHERE m.LanguagePairId in (SELECT Id FROM Language WHERE MyTable1Id = #MyId) -- returns the old language pair id
SET #ROWS_INSERTED += 1
SET #CURRENT_ROW_COUNT +=1
END
ELSE
BEGIN
PRINT 'REACHED EXIT'
SET #ROWS_INSERTED = #DESIRED_ROW_COUNT
BREAK
END
FETCH NEXT FROM #myCursor INTO #MyId;
END
CLOSE #myCursor
DEALLOCATE #myCursor
END
The above code works! It generates the data I need. However, it's very very slow. Just to give some comparison. Initial load of data for table 1 was ~60,000 records, Table2: ~74,000 and Tabl3 ~3,400
I tried to insert 9,000 rows in Table1. With the above code, it took 17:05:01 seconds to complete.
Any suggestion on how I can optimize the query to run little faster? My goal is to insert 1-2 mln records in Table1 without having to wait for days. I'm not tied to CURSOR. I'm ok to achieve the same result in any other way possible.
I have a table with around 17k unique rows for which I need to run these set of statements in sequence
INSERT INTO TABLE1 using MASTERTABLE data (MASTERTABLE have 6 column)
SELECT value of column ID (Primary Key) of newly inserted row from TABLE1
Update that ID value in TABLE2 using a Stored Procedure
I have tried:
while loop: took around 3 hours to complete the execution
cursor: cancelled the query after executing it overnight
In my understanding I can not use JOIN as I need to execute the statements in a sequence
The questions is not detailed enough. The general idea I would like to use something like this
-- create a output table to hold new id, and key columns to join later
DECLARE #OutputTbl TABLE (ID INT, key_Columns in MASTERTABLE)
INSERT INTO TABLE1
OUTPUT INSERTED.ID, MASTERTABLE.key_columns INTO #OutputTbl
SELECT *
FROM MASTERTABLE
UPDATE T2
SET ID = o.ID
FROM TABLE2 t2
INNER JOIN OutputTbl o
ON t2.key_column = o.key_column
Maybe you can consider a TRIGGER on TABLE1 from which to call the stored procedure on TABLE2, and then you can call your INSERT as you wish/need.. one by one or in blocks..
DROP TRIGGER TR_UPD_TABLE2
GO
CREATE TRIGGER TR_UPD_TABLE2 ON TABLE1 AFTER INSERT
AS
BEGIN
SET NOCOUNT ON
DECLARE #columnID INT = NULL
IF (SELECT COUNT(*) FROM INSERTED)=1 BEGIN
-- SINGLE INSERT
SET #columnID = (SELECT columnID FROM INSERTED)
EXEC TableTwoUpdateProcedure #columnID
END ELSE BEGIN
-- MASSIVE INSERT (IF NEEDED)
SET #columnID = 0
WHILE #columnID IS NOT NULL BEGIN
SET #columnID = (SELECT MIN(columnID) FROM INSERTED WHERE columnID > #columnID)
IF #columnID IS NOT NULL BEGIN
EXEC TableTwoUpdateProcedure #columnID
END
END
END
END
I'm working on SP, I want to add a column to a resultset. Normally this would not be a proble, but here I'm using an Exec to fill one temp-table. To that temp-table I want to add one column.
Some prestuff that puts data in one of the temp-tables with some conditions
declare #RowCount int
set #RowCount = 1
create table #Temp_HS (row int IDENTITY (1, 1) NOT NULL, h varchar(30))
Create table #tmpS (K varchar(100),
U varchar(100), Counter int, H varchar(100))
--Puts data in one temp_table with employees
insert into #Temp_HS (h)
select Login from database.dbo.Users
where Old <> 1
and TC in ('A_1', 'A_2')
and Login not in ('Steve', 'Peter', 'Gabs')
--Declaring my counter here, it sets the MaxRow which is 19 in this case
declare #Counter int
set #Counter = (select Max(row) from #Temp_HS)
select * from #Temp_HS
-- Looping, That my RowCount must be less or Equal to Counter which is 19.
while #RowCount <= #Counter
begin
Set User which was originally from the Database Login which is declared as H in the temp table.
declare #user varchar(30)
select #user = h from #Temp_HS where row = #RowCount
Here comes the tricky part, this is the Stored procedure that inserts 3 columns into a temp
table, here I want to add one colum which in this case is h from Temp_HS to the resultset.
INSERT INTO #tmpS
EXEC Database.dbo.getListCount #user,
param,
param,
param,
'something',
param
set #RowCount = #RowCount +1
end
drop table #Temp_HS
If you need any further information just ask! :)
Basically I want to add one more column to the results of my Exec SP that inserts the result into a temp_table
INSERT INTO .. EXEC requires that the table you are inserting into already exists, e.g.
-- Given this preexisting proc
CREATE PROC dbo.getListCount #user INT, -- other params
AS
SELECT #User as Col1,
'SomeVarChar' as Col2
FROM [SomeTable];
-- In your code, create the temp table to hold the data
CREATE TABLE #tmpS
(
Col1 INT,
Col2 NVARCHAR(100),
NewColumnH VARCHAR(30) -- Add the additional column up front
-- etc.
);
This is called as
INSERT INTO #tmpS(Col1, Col2)
EXEC dbo.getListCount, #User;
If you then need to do do further processing on your temp table, do this after the PROC call:
UPDATE ts
SET NewColumnH = t.h
FROM #tmpS ts INNER JOIN #Temp_HS th on th.row = #RowCount;
Actually inner join doesnt work as desireed on temp tables that is why I used this solution. Since I already had #User in a variable I choose to do this update instead.
UPDATE ts
SET NewColumnH = #User
FROM #tmpS ts
where ts.Column is null
I have a stored procedure which output a column. It runs without problem.
exec dbo.sp_SelectAlignmentSubset
#AlnID
,#ParentTaxID
,#SeqTypeID
,#LocationID
,#SubsetSize
,#SimilarityThreshold
,#SimilarityTable
,#AnchorSeqID
But when I insert the procedure output into a temp table,
create table #resultSeqIDs
(
SeqID int not null
)
Insert into #resultSeqIDs
exec dbo.sp_SelectAlignmentSubset
#AlnID
,#ParentTaxID
,#SeqTypeID
,#LocationID
,#SubsetSize
,#SimilarityThreshold
,#SimilarityTable
,#AnchorSeqID
error pop out "The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction."
Thanks in advance.
The query of the procedure is here:
Alter Proc dbo.sp_SelectAlignmentSubset
#AlnID int,
#ParentTaxID int,
#SeqTypeID int,
#LocationID int,
#SubsetSize int,
#SimilarityThreshold float,
#SimilarityTable nvarchar(255),
#AnchorSeqID int = null
As
declare #sql nvarchar(4000), #param nvarchar(2000), #subsetActualSize int, #lastSeqID int, #meanSimilarity float
--- Cleaning
begin try
drop table #Subset
end try
begin catch
end catch
begin try
drop table #tmpAllSeqs
end try
begin catch
end catch
begin try
drop table #AllSeqs
end try
begin catch
end catch
--- Create temp tables
create table #Subset
(
SeqID int not null
)
create table #AllSeqs
(
SeqID int not null
)
create table #tmpAllSeqs
(
SeqID int not null,
Similarity float not null
)
--- Prepare anchor
if #AnchorSeqID is not null
begin
Insert into #Subset values (#AnchorSeqID)
set #lastSeqID = #AnchorSeqID
end
--- Get all SeqIDs in the alignment under the parent taxID
Insert into #AllSeqs
Select SeqID
from dbo.fn_SelectAlignedSequences(#AlnID, #ParentTaxID, #SeqTypeID, #LocationID)
--- Put SeqIDs into #Subset
select #subsetActualSize = count(*) from #Subset
while #subsetActualSize < #SubsetSize
begin
-- select 'Subset size:'+cast(#subsetActualSize as nvarchar(10))
truncate table #tmpAllSeqs
set #sql =
' Insert into #tmpAllSeqs
select st.SeqID2 as SeqID
,st.Similarity
from ' + #SimilarityTable + ' st
where st.SeqID1 = #lastSeqID
and st.SeqID2 in ( select SeqID from #AllSeqs )
and st.Similarity <= #SimilarityThreshold
'
set #param = '#lastSeqID int, #SimilarityThreshold float'
exec sp_executesql #sql, #param, #lastSeqID, #SimilarityThreshold
--- Mark the SeqID will be selected from #AllSeqs and
--- added to #Subset in this round
---
--- Here I select the SeqID with minimum difference from
--- mean of similarity as the SeqID
select #meanSimilarity = AVG(Similarity)
from #tmpAllSeqs
select top 1 #lastSeqID = SeqID
from #tmpAllSeqs
order by abs(Similarity - #meanSimilarity) asc
Insert into #Subset values (#lastSeqID)
--- Update #AllSeqs (all candidate SeqIDs)
truncate table #AllSeqs
Insert into #AllSeqs
select SeqID
from #tmpAllSeqs
--- Increment size of #Subset
select #subsetActualSize = count(*) from #Subset
end
select SeqID from #Subset
drop table #Subset
drop table #AllSeqs
drop table #tmpAllSeqs
Go
You are doing the following statements at the end of your stored procedure:
select SeqID from #Subset
drop table #Subset
Try changing that to
Insert Into #resultSeqIDs select SeqID from #Subset
drop table #Subset
Then remove the INSERT command from where you execute the statement.
Since your #resultSeqIDs Temp table will still be in scope, it will hold all the values you need.
If you are on SQL Server 2008 and above, you can return a table variables - a much better alternative to #temp tables.
If the procedure runs okay, but inserting a record into a temporary table does not, then I'd check the roles of the user running the record insertion. The error message states read-only access.