I have a directory in HDFS (say /user/hduser/table1) and under that directory there are multiple directories for different timestamps like /user/hduser/table1/20160912000000 , /user/hduser/table1/20160912100000 and /user/hduser/table1/20160912121000
How can I read all the files which are under those three directories through one HIVE external table. Means what do I have to specify in HIVE table's LOCATION parameter.
I am able to read nested folders with the below settings.
set hive.mapred.supports.subdirectories=true;
set mapred.input.dir.recursive=true;
I did set it while creating the table and then able to select data from the table. Location keyword I mentioned as below
LOCATION '/user/hduser/table1/'
Try below code
CREATE TABLE TABLEname (coll INT, coll STRING, coll INT)
ROW FORMAT DELIMITED
FIELDS TERMINATED BY ‘,’
LOCATION ‘/user/hduser/table1/*/*’;
Related
I have to replicate a process for a client. I have never worked with Hive, so I am trying to understand what they were doing in other cases.
The Hive script I am trying to understand is this one:
DROP TABLE IF EXISTS distribution.030601_TI11;
CREATE EXTERNAL TABLE IF NOT EXISTS distribution.030601_TI11(
mygroup STRING, year STRING, type1 STRING, type2 STRING,
type3 STRING, myvalue INT)
ROW FORMAT DELIMITED FIELDS TERMINATED BY '\t' LINES TERMINATED BY '\n'
STORED AS TEXTFILE LOCATION '/warehouse/distribution/030601_TI11';
INSERT OVERWRITE TABLE distribution.030601_TI11
SELECT *
FROM develop.030601_TI11;
What are they doing?
As far as I have read about Hive, a DROP TABLE IF EXISTS statement over a external table will only delete the table metadata and not the table data. But I would like to know if that INSERT OVERWRITE statement is dropping the previous entries stored in the table, and inserting only the new rows contained in the specified location
And also, how is the LOCATION managed? I want to create the table from a single .csv file. Can I write something like LOCATION '/warehouse/develop/myfile.csv' or I can only provide a HDFS directory as a location?
INSERT OVERWRITE TABLE removes all files inside table location and moves new file. This happens at the very end when the query has already successfully executed and result files are created in the temporary location, after that load task removes all files in table location and moves files from temp location to the table location. See also this answer: https://stackoverflow.com/a/63378038/2700344
If you want to create table on top of single file, put it in some folder and make sure there are no other files in the same folder and and specify that folder as a location in create table DDL. Also you can put that file into existing table location using hdfs dfs -put command or using LOAD command or using some other means. Main point here is that table should have it's own location, does not matter how many files are in the location - single file or many files, location is a folder (directory), not a file. Even if it was possible to create table on top of single file instead of folder, it is unsafe, because overwrite can create another files and table will have location pointing to non-existing file. carefully read answers on this question: How to point to a single file with external table
You are right, the location for external table will remain as is. So, by drop-create statements they are ensuring that the table doesn't exist before dropping or creating. And the table seems to be dynamic in nature so that can be another reason of drop-create.
Please notice you are using CREATE EXTERNAL TABLE IF NOT EXISTS which means if table exist, it will not recreate.
Storage will be cleaned and loaded using INSERT OVERWRITE.
Now, if you want to create a table on top of csv file just use LOCATION '/warehouse/develop/myfile. You dont have to use .csv in location.
I need to load an s3 data in hive table. This s3 location is dynamic and is stored in another static s3 location.
The dynamic s3 location which I want to load in hive table has path format
s3://s3BucketName/some-path/yyyy-MM-dd
and the static location has data format
{"datasetDate": "datePublished", "s3Location": "s3://s3BucketName/some-path/yyyy-MM-dd"}
Is there a way to read this data in hive? I searched about this a lot but could not find anything.
You can read JSON data from your static location file, parse s3Location field and pass it as a parameter to your add partition clause.
Possible way to read json is using Hive. You can use some other means for the same.
Example using Hive.
create table data_location(location_info string)
ROW FORMAT DELIMITED
FIELDS TERMINATED BY '\t' LINES TERMINATED BY '\n'
STORED AS TEXTFILE
LOCATION 's3://s3BucketName/some-static-location-path/';
Then get the location in the shell script and pass it as a parameter to ADD partition statement.
For example you have table named target_table partitioned by datePublished. You can add partitions like this:
#!/bin/bash
data_location=$(hive -e "set hive.cli.print.header=false; select get_json_object(location_info,'$.s3Location') from data_location")
#get partition name
partition=$(basename ${data_location})
#Create partition in your target table:
hive -e "ALTER TABLE TARGET_TABLE ADD IF NOT EXISTS PARTITION (datePublished='${partition}') LOCATION '${data_location}'"
If you do not want partitioned table, then you can use
ALTER TABLE SET LOCATION instead of adding partition:
hive -e "ALTER TABLE TARGET_TABLE SET LOCATION='${data_location}'"
If it is only the last subfolder name is dynamic (which is date) and base directory is always the same, like s3://s3BucketName/some-path/, only yyyy-MM-dd is changing, you can create table once with location s3://s3BucketName/some-path/ and issue RECOVER PARTITIONS statement. In this case you do not need to read the content of file with location specification. Just schedule RECOVER PARTITIONS to get new partition attached on daily basis.
The below table returns no data while running a select statement
CREATE EXTERNAL TABLE foo (
)
ROW FORMAT DELIMITED
FIELDS TERMINATED BY '\073'
LINES TERMINATED BY '\n'
LOCATION '/user/data/CSV/2016/1/27/*/part-*';
I need my hive to point to a dynamic folder so as a mapreduce job puts a part file in a folder and hive loads into the table.
Is there any way the location be made dynamic like
/user/data/CSV/*/*/*/*/part-*
or just /user/data/CSV/* would do fine ?
(The same code works fine when created as internal table and loaded with the file path - hence there is no issues due to formatting)
First of, your table definition is missing columns. Second, external table location always points to folder, not particular files. Hive will consider all files in the folder to be data for the table.
If you have data that is generated e.g. on a daily basis by some external process you should consider partitioning your table by date. Then you need to add a new partition to the table when the data is available.
Hive does not iterate through multiple folders -
Hence for the above scenario
I ran a command line argument that iterates through these multiple folders and cat (print to the console) all the part files and then put it to a desired location.(that Hive points to)
hadoop fs -cat /user/data/CSV/*/*/*/*/part-* | hadoop fs -put - <destination folder>
This line
LOCATION '/user/data/CSV/2016/1/27/*/part-*';
Does not look correct, I don't think that the table can created from multiple locations. Have you tried just importing by a single location to confirm this?
Could also be the delimiter you're using is not correct. If you are using a CSV file to import your data try delimitating by ','.
You can use an alter table statement to change the locations. In the example below partitions are based on dates where data is stored in time dependent file locations. If I want to search many days I have to add an alter table statement for each location. This idea may extend to your situation quite well. You create a script to generate the create table statement as below using some other technology such as python.
CREATE EXTERNAL TABLE foo (
)
ROW FORMAT DELIMITED
FIELDS TERMINATED BY '\073'
LINES TERMINATED BY '\n'
;
alter table foo add partition (date='20160201') location /user/data/CSV/20160201/data;
alter table foo add partition (date='20160202') location /user/data/CSV/20160202/data;
alter table foo add partition (date='20160203') location /user/data/CSV/20160203/data;
alter table foo add partition (date='20160204') location /user/data/CSV/20160204/data;
You can use as many add and drop statements you need to define your locations. Then your table can find data held in many locations in HDFS rather than having all your files in one location.
You may also be able to leverage a
create table like
statement. To create a schema like you have in another table. Then alter the table to point at the files you want.
I know this isn't exactly what you want and is more of a work around. Good luck!
When we create using
Create external table employee (name string,salary float) row format delimited fields terminated by ',' location /emp
In /emp directory there are 2 emp files.
so when we run select * from employee, it get the data from both the file ad display.
What will be happen when there will be others file also having different kind of record which column is not matching with the employee table , so it will try to load all the files when we run "select * from employee"?
1.Can we specify the specific file name which we want to load?
2.Can we create other table also with the same location?
Thanks
Prashant
It will load all the files in emp directory even it doesn’t match with table.
for your first question. you can use Regex serde.if your data matches to regex.then it loads to the table.
regex for access log in hive serde
https://github.com/apache/hive/blob/trunk/contrib/src/java/org/apache/hadoop/hive/contrib/serde2/RegexSerDe.java
other options:I am pointing some links.these links has some ways.
when creating an external table in hive can I point the location to specific files in a direcotry?
https://issues.apache.org/jira/browse/HIVE-951
for your second question: yes we can create other tables also with the same location.
Here are your answers
1. If the data in the file dosent match with table format, hive doesnt throw an error. It tries to read the data as best as it could. If data for some columns are missing it will put NULL for them.
No we cannot specify the file name for any table to read data. Hive will consider all the files under the table directory.
Yes, we can create other tables with the same location.
I have a set of ~100 files each with 50k IDs in them. I want to be able to make a query against Hive that has a Where In clause using the IDs from these files. I could also do this directly from Groovy, but I'm thinking the code would be cleaner if I did all of the processing from Hive instead of referencing an external Set. Is this possible?
Create an external table describing the format of your files, and set the location to the HDFS path of a directory containing the files.. i.e for tab delimited files
create external table my_ids(
id bigint,
other_col string
)
row format delimited fields terminated by "\t"
stored as textfile
location 'hdfs://mydfs/data/myids'
Now you can use Hive to access this data.