Related
How can one call a stored procedure for each row in a table, where the columns of a row are input parameters to the sp without using a Cursor?
Generally speaking I always look for a set based approach (sometimes at the expense of changing the schema).
However, this snippet does have its place..
-- Declare & init (2008 syntax)
DECLARE #CustomerID INT = 0
-- Iterate over all customers
WHILE (1 = 1)
BEGIN
-- Get next customerId
SELECT TOP 1 #CustomerID = CustomerID
FROM Sales.Customer
WHERE CustomerID > #CustomerId
ORDER BY CustomerID
-- Exit loop if no more customers
IF ##ROWCOUNT = 0 BREAK;
-- call your sproc
EXEC dbo.YOURSPROC #CustomerId
END
You could do something like this: order your table by e.g. CustomerID (using the AdventureWorks Sales.Customer sample table), and iterate over those customers using a WHILE loop:
-- define the last customer ID handled
DECLARE #LastCustomerID INT
SET #LastCustomerID = 0
-- define the customer ID to be handled now
DECLARE #CustomerIDToHandle INT
-- select the next customer to handle
SELECT TOP 1 #CustomerIDToHandle = CustomerID
FROM Sales.Customer
WHERE CustomerID > #LastCustomerID
ORDER BY CustomerID
-- as long as we have customers......
WHILE #CustomerIDToHandle IS NOT NULL
BEGIN
-- call your sproc
-- set the last customer handled to the one we just handled
SET #LastCustomerID = #CustomerIDToHandle
SET #CustomerIDToHandle = NULL
-- select the next customer to handle
SELECT TOP 1 #CustomerIDToHandle = CustomerID
FROM Sales.Customer
WHERE CustomerID > #LastCustomerID
ORDER BY CustomerID
END
That should work with any table as long as you can define some kind of an ORDER BY on some column.
DECLARE #SQL varchar(max)=''
-- MyTable has fields fld1 & fld2
Select #SQL = #SQL + 'exec myproc ' + convert(varchar(10),fld1) + ','
+ convert(varchar(10),fld2) + ';'
From MyTable
EXEC (#SQL)
Ok, so I would never put such code into production, but it does satisfy your requirements.
I'd use the accepted answer, but another possibility is to use a table variable to hold a numbered set of values (in this case just the ID field of a table) and loop through those by Row Number with a JOIN to the table to retrieve whatever you need for the action within the loop.
DECLARE #RowCnt int; SET #RowCnt = 0 -- Loop Counter
-- Use a table variable to hold numbered rows containg MyTable's ID values
DECLARE #tblLoop TABLE (RowNum int IDENTITY (1, 1) Primary key NOT NULL,
ID INT )
INSERT INTO #tblLoop (ID) SELECT ID FROM MyTable
-- Vars to use within the loop
DECLARE #Code NVarChar(10); DECLARE #Name NVarChar(100);
WHILE #RowCnt < (SELECT COUNT(RowNum) FROM #tblLoop)
BEGIN
SET #RowCnt = #RowCnt + 1
-- Do what you want here with the data stored in tblLoop for the given RowNum
SELECT #Code=Code, #Name=LongName
FROM MyTable INNER JOIN #tblLoop tL on MyTable.ID=tL.ID
WHERE tl.RowNum=#RowCnt
PRINT Convert(NVarChar(10),#RowCnt) +' '+ #Code +' '+ #Name
END
Marc's answer is good (I'd comment on it if I could work out how to!)
Just thought I'd point out that it may be better to change the loop so the SELECT only exists once (in a real case where I needed to do this, the SELECT was quite complex, and writing it twice was a risky maintenance issue).
-- define the last customer ID handled
DECLARE #LastCustomerID INT
SET #LastCustomerID = 0
-- define the customer ID to be handled now
DECLARE #CustomerIDToHandle INT
SET #CustomerIDToHandle = 1
-- as long as we have customers......
WHILE #LastCustomerID <> #CustomerIDToHandle
BEGIN
SET #LastCustomerId = #CustomerIDToHandle
-- select the next customer to handle
SELECT TOP 1 #CustomerIDToHandle = CustomerID
FROM Sales.Customer
WHERE CustomerID > #LastCustomerId
ORDER BY CustomerID
IF #CustomerIDToHandle <> #LastCustomerID
BEGIN
-- call your sproc
END
END
If you can turn the stored procedure into a function that returns a table, then you can use cross-apply.
For example, say you have a table of customers, and you want to compute the sum of their orders, you would create a function that took a CustomerID and returned the sum.
And you could do this:
SELECT CustomerID, CustomerSum.Total
FROM Customers
CROSS APPLY ufn_ComputeCustomerTotal(Customers.CustomerID) AS CustomerSum
Where the function would look like:
CREATE FUNCTION ComputeCustomerTotal
(
#CustomerID INT
)
RETURNS TABLE
AS
RETURN
(
SELECT SUM(CustomerOrder.Amount) AS Total FROM CustomerOrder WHERE CustomerID = #CustomerID
)
Obviously, the example above could be done without a user defined function in a single query.
The drawback is that functions are very limited - many of the features of a stored procedure are not available in a user-defined function, and converting a stored procedure to a function does not always work.
For SQL Server 2005 onwards, you can do this with CROSS APPLY and a table-valued function.
Using CROSS APPLY in SQL Server 2005
Just for clarity, I'm referring to those cases where the stored procedure can be converted into a table valued function.
This is a variation on the answers already provided, but should be better performing because it doesn't require ORDER BY, COUNT or MIN/MAX. The only disadvantage with this approach is that you have to create a temp table to hold all the Ids (the assumption is that you have gaps in your list of CustomerIDs).
That said, I agree with #Mark Powell though that, generally speaking, a set based approach should still be better.
DECLARE #tmp table (Id INT IDENTITY(1,1) PRIMARY KEY NOT NULL, CustomerID INT NOT NULL)
DECLARE #CustomerId INT
DECLARE #Id INT = 0
INSERT INTO #tmp SELECT CustomerId FROM Sales.Customer
WHILE (1=1)
BEGIN
SELECT #CustomerId = CustomerId, #Id = Id
FROM #tmp
WHERE Id = #Id + 1
IF ##rowcount = 0 BREAK;
-- call your sproc
EXEC dbo.YOURSPROC #CustomerId;
END
This is a variation of n3rds solution above. No sorting by using ORDER BY is needed, as MIN() is used.
Remember that CustomerID (or whatever other numerical column you use for progress) must have a unique constraint. Furthermore, to make it as fast as possible CustomerID must be indexed on.
-- Declare & init
DECLARE #CustomerID INT = (SELECT MIN(CustomerID) FROM Sales.Customer); -- First ID
DECLARE #Data1 VARCHAR(200);
DECLARE #Data2 VARCHAR(200);
-- Iterate over all customers
WHILE #CustomerID IS NOT NULL
BEGIN
-- Get data based on ID
SELECT #Data1 = Data1, #Data2 = Data2
FROM Sales.Customer
WHERE [ID] = #CustomerID ;
-- call your sproc
EXEC dbo.YOURSPROC #Data1, #Data2
-- Get next customerId
SELECT #CustomerID = MIN(CustomerID)
FROM Sales.Customer
WHERE CustomerID > #CustomerId
END
I use this approach on some varchars I need to look over, by putting them in a temporary table first, to give them an ID.
If you don't what to use a cursor I think you'll have to do it externally (get the table, and then run for each statement and each time call the sp)
it Is the same as using a cursor, but only outside SQL.
Why won't you use a cursor ?
I usually do it this way when it's a quite a few rows:
Select all sproc parameters in a dataset with SQL Management Studio
Right-click -> Copy
Paste in to excel
Create single-row sql statements with a formula like '="EXEC schema.mysproc #param=" & A2' in a new excel column. (Where A2 is your excel column containing the parameter)
Copy the list of excel statements into a new query in SQL Management Studio and execute.
Done.
(On larger datasets i'd use one of the solutions mentioned above though).
DELIMITER //
CREATE PROCEDURE setFakeUsers (OUT output VARCHAR(100))
BEGIN
-- define the last customer ID handled
DECLARE LastGameID INT;
DECLARE CurrentGameID INT;
DECLARE userID INT;
SET #LastGameID = 0;
-- define the customer ID to be handled now
SET #userID = 0;
-- select the next game to handle
SELECT #CurrentGameID = id
FROM online_games
WHERE id > LastGameID
ORDER BY id LIMIT 0,1;
-- as long as we have customers......
WHILE (#CurrentGameID IS NOT NULL)
DO
-- call your sproc
-- set the last customer handled to the one we just handled
SET #LastGameID = #CurrentGameID;
SET #CurrentGameID = NULL;
-- select the random bot
SELECT #userID = userID
FROM users
WHERE FIND_IN_SET('bot',baseInfo)
ORDER BY RAND() LIMIT 0,1;
-- update the game
UPDATE online_games SET userID = #userID WHERE id = #CurrentGameID;
-- select the next game to handle
SELECT #CurrentGameID = id
FROM online_games
WHERE id > LastGameID
ORDER BY id LIMIT 0,1;
END WHILE;
SET output = "done";
END;//
CALL setFakeUsers(#status);
SELECT #status;
A better solution for this is to
Copy/past code of Stored Procedure
Join that code with the table for which you want to run it again (for each row)
This was you get a clean table-formatted output. While if you run SP for every row, you get a separate query result for each iteration which is ugly.
In case the order is important
--declare counter
DECLARE #CurrentRowNum BIGINT = 0;
--Iterate over all rows in [DataTable]
WHILE (1 = 1)
BEGIN
--Get next row by number of row
SELECT TOP 1 #CurrentRowNum = extendedData.RowNum
--here also you can store another values
--for following usage
--#MyVariable = extendedData.Value
FROM (
SELECT
data.*
,ROW_NUMBER() OVER(ORDER BY (SELECT 0)) RowNum
FROM [DataTable] data
) extendedData
WHERE extendedData.RowNum > #CurrentRowNum
ORDER BY extendedData.RowNum
--Exit loop if no more rows
IF ##ROWCOUNT = 0 BREAK;
--call your sproc
--EXEC dbo.YOURSPROC #MyVariable
END
I had some production code that could only handle 20 employees at a time, below is the framework for the code. I just copied the production code and removed stuff below.
ALTER procedure GetEmployees
#ClientId varchar(50)
as
begin
declare #EEList table (employeeId varchar(50));
declare #EE20 table (employeeId varchar(50));
insert into #EEList select employeeId from Employee where (ClientId = #ClientId);
-- Do 20 at a time
while (select count(*) from #EEList) > 0
BEGIN
insert into #EE20 select top 20 employeeId from #EEList;
-- Call sp here
delete #EEList where employeeId in (select employeeId from #EE20)
delete #EE20;
END;
RETURN
end
I had a situation where I needed to perform a series of operations on a result set (table). The operations are all set operations, so its not an issue, but...
I needed to do this in multiple places. So putting the relevant pieces in a table type, then populating a table variable w/ each result set allows me to call the sp and repeat the operations each time i need to .
While this does not address the exact question he asks, it does address how to perform an operation on all rows of a table without using a cursor.
#Johannes offers no insight into his motivation , so this may or may not help him.
my research led me to this well written article which served as a basis for my solution
https://codingsight.com/passing-data-table-as-parameter-to-stored-procedures/
Here is the setup
drop type if exists cpRootMapType
go
create type cpRootMapType as Table(
RootId1 int
, RootId2 int
)
go
drop procedure if exists spMapRoot2toRoot1
go
create procedure spMapRoot2toRoot1
(
#map cpRootMapType Readonly
)
as
update linkTable set root = root1
from linktable lt
join #map m on lt.root = root2
update comments set root = root1
from comments c
join #map m on c.root = root2
-- ever growing list of places this map would need to be applied....
-- now consolidated into one place
here is the implementation
... populate #matches
declare #map cpRootMapType
insert #map select rootid1, rootid2 from #matches
exec spMapRoot2toRoot1 #map
I like to do something similar to this (though it is still very similar to using a cursor)
[code]
-- Table variable to hold list of things that need looping
DECLARE #holdStuff TABLE (
id INT IDENTITY(1,1) ,
isIterated BIT DEFAULT 0 ,
someInt INT ,
someBool BIT ,
otherStuff VARCHAR(200)
)
-- Populate your #holdStuff with... stuff
INSERT INTO #holdStuff (
someInt ,
someBool ,
otherStuff
)
SELECT
1 , -- someInt - int
1 , -- someBool - bit
'I like turtles' -- otherStuff - varchar(200)
UNION ALL
SELECT
42 , -- someInt - int
0 , -- someBool - bit
'something profound' -- otherStuff - varchar(200)
-- Loop tracking variables
DECLARE #tableCount INT
SET #tableCount = (SELECT COUNT(1) FROM [#holdStuff])
DECLARE #loopCount INT
SET #loopCount = 1
-- While loop variables
DECLARE #id INT
DECLARE #someInt INT
DECLARE #someBool BIT
DECLARE #otherStuff VARCHAR(200)
-- Loop through item in #holdStuff
WHILE (#loopCount <= #tableCount)
BEGIN
-- Increment the loopCount variable
SET #loopCount = #loopCount + 1
-- Grab the top unprocessed record
SELECT TOP 1
#id = id ,
#someInt = someInt ,
#someBool = someBool ,
#otherStuff = otherStuff
FROM #holdStuff
WHERE isIterated = 0
-- Update the grabbed record to be iterated
UPDATE #holdAccounts
SET isIterated = 1
WHERE id = #id
-- Execute your stored procedure
EXEC someRandomSp #someInt, #someBool, #otherStuff
END
[/code]
Note that you don't need the identity or the isIterated column on your temp/variable table, i just prefer to do it this way so i don't have to delete the top record from the collection as i iterate through the loop.
I have a set of records (table [#tmp_origin]) containing duplicate entries in a string field ([Names]). I would like to insert the whole content of [#tmp_origin] into the destination table [#tmp_destination], that does NOT allow duplicates and may already contain items.
If the string in the origin table does not exist in the destination table, then in is simply inserted in the destination table, as is.
If an entry in the destination table already exists with the same value of the entry in the original table, a string-ified incremental number must be appended to the string, before it is inserted in the destination table.
The process of moving data in this way has been implemented with a cursor, in this sample script:
-- create initial situation (origin and destination table, both containing items)
-- Begin
CREATE TABLE [#tmp_origin] ([Names] VARCHAR(10))
CREATE TABLE [#tmp_destination] ([Names] VARCHAR(10))
CREATE UNIQUE INDEX [IX_UniqueName] ON [#tmp_destination]([Names] ASC)
INSERT INTO [#tmp_origin]([Names]) VALUES ('a')
INSERT INTO [#tmp_origin]([Names]) VALUES ('a')
INSERT INTO [#tmp_origin]([Names]) VALUES ('b')
INSERT INTO [#tmp_origin]([Names]) VALUES ('c')
INSERT INTO [#tmp_destination]([Names]) VALUES ('a')
INSERT INTO [#tmp_destination]([Names]) VALUES ('a_1')
INSERT INTO [#tmp_destination]([Names]) VALUES ('b')
-- create initial situation - End
DECLARE #Name VARCHAR(10)
DECLARE NamesCursor CURSOR LOCAL FORWARD_ONLY FAST_FORWARD READ_ONLY FOR
SELECT [Names]
FROM [#tmp_origin];
OPEN NamesCursor;
FETCH NEXT FROM NamesCursor INTO #Name;
WHILE ##FETCH_STATUS = 0
BEGIN
DECLARE #finalName VARCHAR(10)
SET #finalName = #Name
DECLARE #counter INT
SET #counter = 1
WHILE(1=1)
BEGIN
IF NOT EXISTS(SELECT * FROM [#tmp_destination] WHERE [Names] = #finalName)
BREAK;
SET #finalName = #Name + '_' + CAST(#counter AS VARCHAR)
SET #counter = #counter + 1
END
INSERT INTO [#tmp_destination] ([Names]) (
SELECT #finalName
)
FETCH NEXT FROM NamesCursor INTO #Name;
END
CLOSE NamesCursor;
DEALLOCATE NamesCursor;
SELECT *
FROM [#tmp_destination]
/*
Expected result:
a
a_1
a_2
a_3
b
b_1
c
*/
DROP TABLE [#tmp_origin]
DROP TABLE [#tmp_destination]
This works correctly, but its performance drastically slows down when the number of items to insert increases.
Any idea to speed it up?
thanks
Using a windowing function allows the duplicates to be numbered. You can also get the count from the destination table (will need where condition to strip off the suffix you've added):
select orig.names,
row_number() over (partition by orig.names order by orig.names) as rowNo,
dest.count
from ##tmp_origin orig
cross apply (select count(1) from #tmp_destination where names = orig.names) as dest
An insert can be built from the above (new suffix is rowNo + dest.count -1 if greater than zero).
Suggest you refactor the destination temporary table to include the name and suffix as separate columns – this might mean having a new intermediate stage – because this will make the matching logic much simpler.
Something like this:
insert [#tmp_destination]
select CASE WHEN row_number() over(partition by Names order by Names) > 1 THEN Names + '_' + CONVERT(VARCHAR(10), row_number() over(partition by Names order by Names)) ELSE Names END
from [#tmp_origin]
I wouldn't use a cursor in that case. Instead, I would build the query using ROW_NUMBER(). This way you add a counter in your original table, and then use this counter to append to your [Names]:
SELECT [Names], ROW_NUMBER() OVER (PARTITION BY [Names] ORDER BY [Names]) - 1 AS [counter]
INTO #tmp_origin_with_counter
FROM #tmp_origin
SELECT CONCAT([Names], IIF([counter] = 0, '', '_'+ CAST([counter] AS NVARCHAR)))
INTO #tmp_destination
FROM #tmp_origin_with_counter
I have a created a stored procedure (please ignore syntax errors)
alter proc usp_newServerDetails
(#appid int, #envid int, #serType varchar(20), #servName varchar(20))
as
declare #oTbl_sd table (ID int)
declare #outID1
declare #oTbl_cd table (ID int)
declare #outID2
begin Transaction
insert into server_details(envid, servertype, servername)
output inserted.serverid into #oTbl_sd(ID)
values(#envid, #serType, #servName)
select #outID1 = ID from #oTbl_sd
insert into configdetails(serverid, servertype, configpath, configtype)
output inserted.configid into #oTbl_cd(ID)
(select #outID1, cm.servertype, cm.configpath, cm.configtype
from configpthmaster cm
where cm.appid = #appid )
select #outID2 = ID from #oTbl_cd
insert into configkeydetails(confiid, keyname)
output inserted.Keyid into #oTbl_ckd(ID)
(select #outID2, cm.key
from configpthmaster cm
where cm.appid = #appid)
begin
commit
end
server_details table has an identity column ID with is auto-generated ie. #outID1 and first insert query inserts only 1 row.
configpthmaster table is not related to any other table directly and has 2 unique data rows, which I want to fetch to insert data into other tables, one by one during insertion.
The second insert query fetch data from configpthmaster table
and insert 2 rows in configdetails while generating (auto-generated) ID ie. #outID2.
It also has a FK mapped to server_details.
The problem is "#outID2" giving last inserted ID only (ie. if two id generated 100,101 i am getting 101) which eventually on 3rd insertion, inserting 2 rows with same id 101 only but i want the insertion should be linear. i.e one for 100 and other for 101.
If zero rows affected while insertion how to rollback the transaction?
How can I achieve these requirements? Please help.
Change your procedure like below,and try again.
ALTER PROCEDURE usp_newServerDetails(#appid int, #envid int,#serType varchar(20),#servName varchar(20))
AS
BEGIN
BEGIN TRY
DECLARE #Output TABLE (ID int,TableName VARCHAR(50),cmKey VARCHAR(50)) --table variable for keeping Inserted ID's
BEGIN TRAN
IF EXISTS ( SELECT 1 FROM configpthmaster cm WHERE cm.appid = #appid )
AND ( SELECT 1 FROM configkeydetails ck WHERE ck.appid = #appid ) --add a conditon to satisfy the valid insertions
BEGIN
INSERT INTO server_detials(envid,servertype,servername)
OUTPUT inserted.serverid,'server_detials',NULL INTO #Output(ID,TableName,cmKey )
VALUES(#envid ,#serType ,#servName)
INSERT INTO configdetails(serverid,servertype,configpath,configtype)
OUTPUT inserted.configid,'configdetails',cm.Key INTO #Output(ID,TableName,cmKey )
SELECT t.ID,cm.servertype,cm.configpath,cm.configtype
FROM configpthmaster cm
CROSS APPLY (SELECT ID FROM #Output WHERE TableName='server_detials')t
WHERE cm.appid = #appid
INSERT INTO configkeydetails(configId,keyname)
SELECT ID,cmKey FROM #Output
WHERE TableName='configdetails'
END
COMMIT TRAN
END TRY
BEGIN CATCH
IF ##TRANCOUNT > 0
ROLLBACK
END CATCH
END
Could you try this solution?
alter proc usp_newServerDetails(#appid int, #envid int,#serType varchar(20),#servName varchar(20))
as
declare #oTbl_sd table (ID int)
declare #outID1
declare #oTbl_cd table (ID int)
declare #outID2
begin Transaction
insert into server_detials(envid,servertype,servername)
output inserted.serverid into #oTbl_sd(ID)
values(#envid ,#serType ,#servName)
select #outID1 = ID from #oTbl_sd
insert into configdetails(serverid,servertype,configpath,configtype)
output inserted.configid into #oTbl_cd(ID)
(select #outID1 ,cm.servertype,cm.configpath,cm.configtype from configpthmaster cm where cm.appid = #appid )
select #outID2 = ID from #oTbl_cd
insert into configkeydetails(confiid,keyname)
output inserted.Keyid into #oTbl_ckd(ID)
(select isnull(replace(stuff((SELECT inserted.configid FOR xml path('')), 1, 1, ''), '&', '&'), '') ,cm.key, from configpthmaster cm where cm.appid = #appid )
begin
commit
end
I just added STUFF in your code.
The STUFF function inserts a string into another string.
Do take note that using STUFF drastically slows the processing time of the code.
for more information about STUFF
I'm working on SP, I want to add a column to a resultset. Normally this would not be a proble, but here I'm using an Exec to fill one temp-table. To that temp-table I want to add one column.
Some prestuff that puts data in one of the temp-tables with some conditions
declare #RowCount int
set #RowCount = 1
create table #Temp_HS (row int IDENTITY (1, 1) NOT NULL, h varchar(30))
Create table #tmpS (K varchar(100),
U varchar(100), Counter int, H varchar(100))
--Puts data in one temp_table with employees
insert into #Temp_HS (h)
select Login from database.dbo.Users
where Old <> 1
and TC in ('A_1', 'A_2')
and Login not in ('Steve', 'Peter', 'Gabs')
--Declaring my counter here, it sets the MaxRow which is 19 in this case
declare #Counter int
set #Counter = (select Max(row) from #Temp_HS)
select * from #Temp_HS
-- Looping, That my RowCount must be less or Equal to Counter which is 19.
while #RowCount <= #Counter
begin
Set User which was originally from the Database Login which is declared as H in the temp table.
declare #user varchar(30)
select #user = h from #Temp_HS where row = #RowCount
Here comes the tricky part, this is the Stored procedure that inserts 3 columns into a temp
table, here I want to add one colum which in this case is h from Temp_HS to the resultset.
INSERT INTO #tmpS
EXEC Database.dbo.getListCount #user,
param,
param,
param,
'something',
param
set #RowCount = #RowCount +1
end
drop table #Temp_HS
If you need any further information just ask! :)
Basically I want to add one more column to the results of my Exec SP that inserts the result into a temp_table
INSERT INTO .. EXEC requires that the table you are inserting into already exists, e.g.
-- Given this preexisting proc
CREATE PROC dbo.getListCount #user INT, -- other params
AS
SELECT #User as Col1,
'SomeVarChar' as Col2
FROM [SomeTable];
-- In your code, create the temp table to hold the data
CREATE TABLE #tmpS
(
Col1 INT,
Col2 NVARCHAR(100),
NewColumnH VARCHAR(30) -- Add the additional column up front
-- etc.
);
This is called as
INSERT INTO #tmpS(Col1, Col2)
EXEC dbo.getListCount, #User;
If you then need to do do further processing on your temp table, do this after the PROC call:
UPDATE ts
SET NewColumnH = t.h
FROM #tmpS ts INNER JOIN #Temp_HS th on th.row = #RowCount;
Actually inner join doesnt work as desireed on temp tables that is why I used this solution. Since I already had #User in a variable I choose to do this update instead.
UPDATE ts
SET NewColumnH = #User
FROM #tmpS ts
where ts.Column is null
How can one call a stored procedure for each row in a table, where the columns of a row are input parameters to the sp without using a Cursor?
Generally speaking I always look for a set based approach (sometimes at the expense of changing the schema).
However, this snippet does have its place..
-- Declare & init (2008 syntax)
DECLARE #CustomerID INT = 0
-- Iterate over all customers
WHILE (1 = 1)
BEGIN
-- Get next customerId
SELECT TOP 1 #CustomerID = CustomerID
FROM Sales.Customer
WHERE CustomerID > #CustomerId
ORDER BY CustomerID
-- Exit loop if no more customers
IF ##ROWCOUNT = 0 BREAK;
-- call your sproc
EXEC dbo.YOURSPROC #CustomerId
END
You could do something like this: order your table by e.g. CustomerID (using the AdventureWorks Sales.Customer sample table), and iterate over those customers using a WHILE loop:
-- define the last customer ID handled
DECLARE #LastCustomerID INT
SET #LastCustomerID = 0
-- define the customer ID to be handled now
DECLARE #CustomerIDToHandle INT
-- select the next customer to handle
SELECT TOP 1 #CustomerIDToHandle = CustomerID
FROM Sales.Customer
WHERE CustomerID > #LastCustomerID
ORDER BY CustomerID
-- as long as we have customers......
WHILE #CustomerIDToHandle IS NOT NULL
BEGIN
-- call your sproc
-- set the last customer handled to the one we just handled
SET #LastCustomerID = #CustomerIDToHandle
SET #CustomerIDToHandle = NULL
-- select the next customer to handle
SELECT TOP 1 #CustomerIDToHandle = CustomerID
FROM Sales.Customer
WHERE CustomerID > #LastCustomerID
ORDER BY CustomerID
END
That should work with any table as long as you can define some kind of an ORDER BY on some column.
DECLARE #SQL varchar(max)=''
-- MyTable has fields fld1 & fld2
Select #SQL = #SQL + 'exec myproc ' + convert(varchar(10),fld1) + ','
+ convert(varchar(10),fld2) + ';'
From MyTable
EXEC (#SQL)
Ok, so I would never put such code into production, but it does satisfy your requirements.
I'd use the accepted answer, but another possibility is to use a table variable to hold a numbered set of values (in this case just the ID field of a table) and loop through those by Row Number with a JOIN to the table to retrieve whatever you need for the action within the loop.
DECLARE #RowCnt int; SET #RowCnt = 0 -- Loop Counter
-- Use a table variable to hold numbered rows containg MyTable's ID values
DECLARE #tblLoop TABLE (RowNum int IDENTITY (1, 1) Primary key NOT NULL,
ID INT )
INSERT INTO #tblLoop (ID) SELECT ID FROM MyTable
-- Vars to use within the loop
DECLARE #Code NVarChar(10); DECLARE #Name NVarChar(100);
WHILE #RowCnt < (SELECT COUNT(RowNum) FROM #tblLoop)
BEGIN
SET #RowCnt = #RowCnt + 1
-- Do what you want here with the data stored in tblLoop for the given RowNum
SELECT #Code=Code, #Name=LongName
FROM MyTable INNER JOIN #tblLoop tL on MyTable.ID=tL.ID
WHERE tl.RowNum=#RowCnt
PRINT Convert(NVarChar(10),#RowCnt) +' '+ #Code +' '+ #Name
END
Marc's answer is good (I'd comment on it if I could work out how to!)
Just thought I'd point out that it may be better to change the loop so the SELECT only exists once (in a real case where I needed to do this, the SELECT was quite complex, and writing it twice was a risky maintenance issue).
-- define the last customer ID handled
DECLARE #LastCustomerID INT
SET #LastCustomerID = 0
-- define the customer ID to be handled now
DECLARE #CustomerIDToHandle INT
SET #CustomerIDToHandle = 1
-- as long as we have customers......
WHILE #LastCustomerID <> #CustomerIDToHandle
BEGIN
SET #LastCustomerId = #CustomerIDToHandle
-- select the next customer to handle
SELECT TOP 1 #CustomerIDToHandle = CustomerID
FROM Sales.Customer
WHERE CustomerID > #LastCustomerId
ORDER BY CustomerID
IF #CustomerIDToHandle <> #LastCustomerID
BEGIN
-- call your sproc
END
END
If you can turn the stored procedure into a function that returns a table, then you can use cross-apply.
For example, say you have a table of customers, and you want to compute the sum of their orders, you would create a function that took a CustomerID and returned the sum.
And you could do this:
SELECT CustomerID, CustomerSum.Total
FROM Customers
CROSS APPLY ufn_ComputeCustomerTotal(Customers.CustomerID) AS CustomerSum
Where the function would look like:
CREATE FUNCTION ComputeCustomerTotal
(
#CustomerID INT
)
RETURNS TABLE
AS
RETURN
(
SELECT SUM(CustomerOrder.Amount) AS Total FROM CustomerOrder WHERE CustomerID = #CustomerID
)
Obviously, the example above could be done without a user defined function in a single query.
The drawback is that functions are very limited - many of the features of a stored procedure are not available in a user-defined function, and converting a stored procedure to a function does not always work.
For SQL Server 2005 onwards, you can do this with CROSS APPLY and a table-valued function.
Using CROSS APPLY in SQL Server 2005
Just for clarity, I'm referring to those cases where the stored procedure can be converted into a table valued function.
This is a variation on the answers already provided, but should be better performing because it doesn't require ORDER BY, COUNT or MIN/MAX. The only disadvantage with this approach is that you have to create a temp table to hold all the Ids (the assumption is that you have gaps in your list of CustomerIDs).
That said, I agree with #Mark Powell though that, generally speaking, a set based approach should still be better.
DECLARE #tmp table (Id INT IDENTITY(1,1) PRIMARY KEY NOT NULL, CustomerID INT NOT NULL)
DECLARE #CustomerId INT
DECLARE #Id INT = 0
INSERT INTO #tmp SELECT CustomerId FROM Sales.Customer
WHILE (1=1)
BEGIN
SELECT #CustomerId = CustomerId, #Id = Id
FROM #tmp
WHERE Id = #Id + 1
IF ##rowcount = 0 BREAK;
-- call your sproc
EXEC dbo.YOURSPROC #CustomerId;
END
This is a variation of n3rds solution above. No sorting by using ORDER BY is needed, as MIN() is used.
Remember that CustomerID (or whatever other numerical column you use for progress) must have a unique constraint. Furthermore, to make it as fast as possible CustomerID must be indexed on.
-- Declare & init
DECLARE #CustomerID INT = (SELECT MIN(CustomerID) FROM Sales.Customer); -- First ID
DECLARE #Data1 VARCHAR(200);
DECLARE #Data2 VARCHAR(200);
-- Iterate over all customers
WHILE #CustomerID IS NOT NULL
BEGIN
-- Get data based on ID
SELECT #Data1 = Data1, #Data2 = Data2
FROM Sales.Customer
WHERE [ID] = #CustomerID ;
-- call your sproc
EXEC dbo.YOURSPROC #Data1, #Data2
-- Get next customerId
SELECT #CustomerID = MIN(CustomerID)
FROM Sales.Customer
WHERE CustomerID > #CustomerId
END
I use this approach on some varchars I need to look over, by putting them in a temporary table first, to give them an ID.
If you don't what to use a cursor I think you'll have to do it externally (get the table, and then run for each statement and each time call the sp)
it Is the same as using a cursor, but only outside SQL.
Why won't you use a cursor ?
I usually do it this way when it's a quite a few rows:
Select all sproc parameters in a dataset with SQL Management Studio
Right-click -> Copy
Paste in to excel
Create single-row sql statements with a formula like '="EXEC schema.mysproc #param=" & A2' in a new excel column. (Where A2 is your excel column containing the parameter)
Copy the list of excel statements into a new query in SQL Management Studio and execute.
Done.
(On larger datasets i'd use one of the solutions mentioned above though).
DELIMITER //
CREATE PROCEDURE setFakeUsers (OUT output VARCHAR(100))
BEGIN
-- define the last customer ID handled
DECLARE LastGameID INT;
DECLARE CurrentGameID INT;
DECLARE userID INT;
SET #LastGameID = 0;
-- define the customer ID to be handled now
SET #userID = 0;
-- select the next game to handle
SELECT #CurrentGameID = id
FROM online_games
WHERE id > LastGameID
ORDER BY id LIMIT 0,1;
-- as long as we have customers......
WHILE (#CurrentGameID IS NOT NULL)
DO
-- call your sproc
-- set the last customer handled to the one we just handled
SET #LastGameID = #CurrentGameID;
SET #CurrentGameID = NULL;
-- select the random bot
SELECT #userID = userID
FROM users
WHERE FIND_IN_SET('bot',baseInfo)
ORDER BY RAND() LIMIT 0,1;
-- update the game
UPDATE online_games SET userID = #userID WHERE id = #CurrentGameID;
-- select the next game to handle
SELECT #CurrentGameID = id
FROM online_games
WHERE id > LastGameID
ORDER BY id LIMIT 0,1;
END WHILE;
SET output = "done";
END;//
CALL setFakeUsers(#status);
SELECT #status;
A better solution for this is to
Copy/past code of Stored Procedure
Join that code with the table for which you want to run it again (for each row)
This was you get a clean table-formatted output. While if you run SP for every row, you get a separate query result for each iteration which is ugly.
In case the order is important
--declare counter
DECLARE #CurrentRowNum BIGINT = 0;
--Iterate over all rows in [DataTable]
WHILE (1 = 1)
BEGIN
--Get next row by number of row
SELECT TOP 1 #CurrentRowNum = extendedData.RowNum
--here also you can store another values
--for following usage
--#MyVariable = extendedData.Value
FROM (
SELECT
data.*
,ROW_NUMBER() OVER(ORDER BY (SELECT 0)) RowNum
FROM [DataTable] data
) extendedData
WHERE extendedData.RowNum > #CurrentRowNum
ORDER BY extendedData.RowNum
--Exit loop if no more rows
IF ##ROWCOUNT = 0 BREAK;
--call your sproc
--EXEC dbo.YOURSPROC #MyVariable
END
I had some production code that could only handle 20 employees at a time, below is the framework for the code. I just copied the production code and removed stuff below.
ALTER procedure GetEmployees
#ClientId varchar(50)
as
begin
declare #EEList table (employeeId varchar(50));
declare #EE20 table (employeeId varchar(50));
insert into #EEList select employeeId from Employee where (ClientId = #ClientId);
-- Do 20 at a time
while (select count(*) from #EEList) > 0
BEGIN
insert into #EE20 select top 20 employeeId from #EEList;
-- Call sp here
delete #EEList where employeeId in (select employeeId from #EE20)
delete #EE20;
END;
RETURN
end
I had a situation where I needed to perform a series of operations on a result set (table). The operations are all set operations, so its not an issue, but...
I needed to do this in multiple places. So putting the relevant pieces in a table type, then populating a table variable w/ each result set allows me to call the sp and repeat the operations each time i need to .
While this does not address the exact question he asks, it does address how to perform an operation on all rows of a table without using a cursor.
#Johannes offers no insight into his motivation , so this may or may not help him.
my research led me to this well written article which served as a basis for my solution
https://codingsight.com/passing-data-table-as-parameter-to-stored-procedures/
Here is the setup
drop type if exists cpRootMapType
go
create type cpRootMapType as Table(
RootId1 int
, RootId2 int
)
go
drop procedure if exists spMapRoot2toRoot1
go
create procedure spMapRoot2toRoot1
(
#map cpRootMapType Readonly
)
as
update linkTable set root = root1
from linktable lt
join #map m on lt.root = root2
update comments set root = root1
from comments c
join #map m on c.root = root2
-- ever growing list of places this map would need to be applied....
-- now consolidated into one place
here is the implementation
... populate #matches
declare #map cpRootMapType
insert #map select rootid1, rootid2 from #matches
exec spMapRoot2toRoot1 #map
I like to do something similar to this (though it is still very similar to using a cursor)
[code]
-- Table variable to hold list of things that need looping
DECLARE #holdStuff TABLE (
id INT IDENTITY(1,1) ,
isIterated BIT DEFAULT 0 ,
someInt INT ,
someBool BIT ,
otherStuff VARCHAR(200)
)
-- Populate your #holdStuff with... stuff
INSERT INTO #holdStuff (
someInt ,
someBool ,
otherStuff
)
SELECT
1 , -- someInt - int
1 , -- someBool - bit
'I like turtles' -- otherStuff - varchar(200)
UNION ALL
SELECT
42 , -- someInt - int
0 , -- someBool - bit
'something profound' -- otherStuff - varchar(200)
-- Loop tracking variables
DECLARE #tableCount INT
SET #tableCount = (SELECT COUNT(1) FROM [#holdStuff])
DECLARE #loopCount INT
SET #loopCount = 1
-- While loop variables
DECLARE #id INT
DECLARE #someInt INT
DECLARE #someBool BIT
DECLARE #otherStuff VARCHAR(200)
-- Loop through item in #holdStuff
WHILE (#loopCount <= #tableCount)
BEGIN
-- Increment the loopCount variable
SET #loopCount = #loopCount + 1
-- Grab the top unprocessed record
SELECT TOP 1
#id = id ,
#someInt = someInt ,
#someBool = someBool ,
#otherStuff = otherStuff
FROM #holdStuff
WHERE isIterated = 0
-- Update the grabbed record to be iterated
UPDATE #holdAccounts
SET isIterated = 1
WHERE id = #id
-- Execute your stored procedure
EXEC someRandomSp #someInt, #someBool, #otherStuff
END
[/code]
Note that you don't need the identity or the isIterated column on your temp/variable table, i just prefer to do it this way so i don't have to delete the top record from the collection as i iterate through the loop.