I read in the Raspberry Pi Official Documentation that you cannot preview the picamera using SSH and VNC. The doc states:
Note that the camera preview only works when a monitor is connected to
the Pi, so remote access (such as SSH and VNC) will not allow you to
see the camera preview.
But, I have googled and I have found a tweak to preview picamera on PC running on Ubuntu. Here is the link. The tutorial uses NetCat on Ubuntu.
I cannot find NetCat for my Windows machine. Is there any way possible to do what I want on Windows.
Yes! On your raspberry pi install xRDP
sudo apt-get install xrdp
Then log in from your Windows and open Remote Desktop Connection/Viewer and proceed.
Note: it is vital to update and upgrade packages first. Also ensure you have the latest firmware.
Related
I am trying to remotely access a Jetson Nano from my mac. So far I have done the following:
I installed microsoft Remote Desktop on my mac
I connected the nano with my mac through the Micro-usb Port
In network I could see the connection "linux for Tegra" where my nano would be 192.168.55.1
With this I still cannot remote access the nano
So I open a terminal and typed
>ssh username#192.168.55.1
and I could access the nano terminal.
So I think now, I have to do
>sudo apt install xrdp
in order to be able to remotely access the GUI.
However, the nano does not have internet connection.
Is there a way that it can use the internet connection of my mac to do this?
(I am reading a tutorial on Rasppi with windows and apparently this is possible)
One of the approaches is to install X server for mac and then use ssh -Y username#192.168.55.1. You will get the command line shell first but you can type in commands like gedit - they windows will show up on the host.
192.168.55.1 is the same network as any other. All tools supposed to work over TCP/IP should work with it as well.
USB is a Serial connection by default.
On windows use a putty based tool.
For example start with MobaXterm > New session > Serial #11500
Login
Password
It won't forward internet by default.
Best simple way is to plug in your phone as USB network sharing and plug in to the laptop via micro-USB.
For Linux, Ubuntu, use a serial ("COM" related stuff) tool.
If you want to do ssh through USB it will require custom editing of networking file.
By default Nano is using a bridge called L4TBRO on 192.168.55.1, laptop is client in .100.
DNS server is on Nano's side.
You would have to create a new interface but using your laptop as DCHP and DNS servers.
Note that usb can power the Jetson Nano for continuous execution on a recent laptop. Some recommends not to and it may crash if you run a compilation on all cores. (if it crashes, just disable 2 cores via nvpmodel -m 1)
I am new to Hadoop and the Big Data world...
I have installed the Hortonworks Sandbox VM in Virtual Box. It's working great...
Can someone tell me how to install Firefox within the VM? I need it to use NIFI
Thanks a lot for any help!
Installing a browser on the VM and using it through VNC will typically be very slow. The best option is to set up an SSH Tunnel and do a local forward. If you use the PuTTy ssh client on windows then you can follow the following instructions on setting up the local forward which will allow you to use your browser on the host operating system to connect to the NIFI instance running in your VM.
I am running a virtual machine in Bluemix and want to open the OS's desktop GUI. How do I do this? Thanks for your help.
I've edited your question to what I think you're asking: How can I open the desktop GUI on my virtual machine in Bluemix?
Assuming I understand the question correctly:
To open the desktop GUI on a remote virtual machine, use Virtual Network Computing (VNC). This solution is not specific to Bluemix; it'll work with a VM running on any platform, as long as the VM is running an OS that supports VNC.
To use VNC, you need to have a VNC server running in your VM's OS. You will then run a VNC client (a.k.a. viewer) on your computer to display the VM's desktop. The specific instructions depend on the OS running in the VM and on your computer.
For example, assuming your VM is running Ubuntu v14.04, these resources explain what to do (and a search will find other resources):
"How to Install and Configure VNC on Ubuntu 14.04" -- Installs XFCE4 as the VNC server
"How To Install And Configure VNC On Ubuntu 14.04" -- Also installs XFCE4.
"How to Install VNC Server on Ubuntu 14.04 LTS" -- Installs TightVNC as the VNC server
For a VNC client, I actually connect to remote VMs via a local VM running Ubutu 14.04, so I use Vinagre (a.k.a. the Remote Desktop Viewer app). Options listed by other authors include TightVNC, RealVNC, or UltraVNC.
Good luck and thanks for using Bluemix.
From what I understand, you need some remote desktop tool to get to the UI of the OS of your virtual machine. Some tools available: http://www.techradar.com/us/news/software/applications/7-of-the-best-linux-remote-desktop-clients-716346
I'm trying to get the desktop of my Raspberry Pi to display on my mac. I've done this numerous times before with an X11 display app installed locally on the mac ( in this case XQuartz ) and X11 forwarding enabeled on the raspberry pi, through SSH with X11 enabled.
Here are the commands:
bryans-mbp:~ bryan$ ssh -X pi#192.168.1.185
pi#192.168.1.185's password:
With XQuartz running
pi#raspberrypi ~ $ lxsession&
[1] 2515
Heres the strange thing, XQuartz brings up a window in the background, it replaces the background for my desktop however its just the raspberry pi logo (same logo on the raspi desktop). I can't minimize or make use of the window. So, it's displaying something. But I can't use or interact with the display.
What am I doing wrong?
Please see the attached link (cant post images due to experience).
RPI DESKTOP SCREEN GRAB
That's indeed weird, but if you want to see the whole desktop rather than run individual X apps, what I'd instead suggest is installing xrdp on the Pi, with sudo apt-get install xrdp.
Then you can use an RDP client (e.g. Microsoft Remote Desktop Connection or its older non-App Store version) to connect. It performs significantly better than X, in my experience.
the right command for quartz x11 users is:
/etc/X11/Xsession
instead of
lxsession&
Currently trying to setup the mininet virtual machine. I did all according to the instructions. Before proceeding following is my setup details.
My host platform - Windows 8.1
My guest OS : Ubuntu 14.04, 32-bit with mininet. I downloaded the
ovf this one - mininet-2.2.0-141209-ubuntu-14.04-server-i386. Running on VirtualBox
I installed the required packages on the mininet-ubuntu-server (xserver-xorg-core,xserver-xorg,xorg,xorg openbox,ubuntu-desktop). One package fxlrg, I could not install as it was saying "unable to locate package"
Then I used the command "startx" on virtualbox console, it started the ubuntu desktop but very slow and with poping up 4 to 5 errors.
I have already setup the network for host-only adapter, I am able to ping from host machine to guest machine, I am able to ssh from host machine to guest machine using PuTTy. I am able to login with no problems.
But I don't know to see the x11 window from PuTTy. I have already enabled the X11 forwarding on PuTTy and I have already installed the Xming on windows. Please suggest how to debug and how to fix this. I have no idea how to proceed now.
You may need to enable X11 SSH Forwarding in the /etc/ssh/ssh_config file.