SAP SLT into HANA not updating date field - abap

Question

I would like to SLT data into our HANA Data warehouse. That is the easy part, I can move data that is a one to one match (type 1 table). But I would like to make it type 2 and preserve history. I have the following code in the transform, and it will not populate the update field.
*&---------------------------------------------------------------------*
*& Include ZAUSP_SLT_TRANSFORM
*&---------------------------------------------------------------------*
STATICS lv_syn_name TYPE tabname.
DATA con_name TYPE dbcon_name.
DATA lv_timestamp TYPE timestampl.
FIELD-SYMBOLS <lv_operation> TYPE any.
CONCATENATE _mt_id ':R:R' INTO con_name.
ASSIGN COMPONENT 'IUUC_OPERAT_FLAG' OF STRUCTURE <wa_s_AUSP> TO <lv_operation>.
IF sy-subrc = 0 AND
<lv_operation> = 'D'.
IF lv_syn_name IS INITIAL.
CALL METHOD cl_iuuc_tab_ident_access=>get_ident
EXPORTING
iv_mt_id = _mt_id
iv_tabname = _cobj_alias
iv_system_type = cl_iuuc_tab_ident_access=>co_system_receiver
iv_ident_type = cl_iuuc_tab_ident_access=>co_ident_synonym
IMPORTING
ev_full_name = lv_syn_name.
IF lv_syn_name IS INITIAL.
allog_msg 'E' 'DMC_RT_MSG' '000'
'Get Synonym Error' space space space 'IL '.
RAISE stopped_by_rule.
ENDIF.
ENDIF.
GET TIME STAMP FIELD lv_timestamp.
UPDATE (lv_syn_name) CLIENT SPECIFIED CONNECTION (con_name)
SET ZDELETE_FLAG = 'X'
ZUPD_DATETIME = lv_timestamp
WHERE mandt = <wa_s_AUSP>-mandt
AND objek = <wa_s_AUSP>-objek
AND atinn = <wa_s_AUSP>-atinn
AND atzhl = <wa_s_AUSP>-atzhl
AND mafid = <wa_s_AUSP>-mafid
AND klart = <wa_s_AUSP>-klart
AND adzhl = <wa_s_AUSP>-adzhl.
IF sy-subrc <> 0.
allog_msg 'E' 'DMC_RT_MSG' '000'
'Update Error' space space space 'IL '.
RAISE stopped_by_rule.
ENDIF.
skip_record.
ENDIF.
"Code for timestamp outside of delete.
IF lv_syn_name IS INITIAL.
CALL METHOD cl_iuuc_tab_ident_access=>get_ident
EXPORTING
iv_mt_id = _mt_id
iv_tabname = _cobj_alias
iv_system_type = cl_iuuc_tab_ident_access=>co_system_receiver
iv_ident_type = cl_iuuc_tab_ident_access=>co_ident_synonym
IMPORTING
ev_full_name = lv_syn_name.
IF lv_syn_name IS INITIAL.
allog_msg 'E' 'DMC_RT_MSG' '000'
'Get Synonym Error' space space space 'IL '.
RAISE stopped_by_rule.
ENDIF.
ENDIF.
GET TIME STAMP FIELD lv_timestamp.
UPDATE (lv_syn_name) CLIENT SPECIFIED CONNECTION (con_name)
SET ZUPD_DATETIME = lv_timestamp "slt_update is the name in your slt strucure!
WHERE MANDT = <wa_s_AUSP>-MANDT "key_1 = pk of your table
AND OBJEK = <wa_s_AUSP>-OBJEK
AND ATINN = <wa_s_AUSP>-ATINN
AND ATZHL = <wa_s_AUSP>-ATZHL
AND MAFID = <wa_s_AUSP>-MAFID
AND KLART = <wa_s_AUSP>-KLART
AND ADZHL = <wa_s_AUSP>-ADZHL.
IF sy-subrc <> 0.
allog_msg 'E' 'DMC_RT_MSG' '000'
'Update Error' space space space 'IL '.
RAISE stopped_by_rule.
ENDIF.
Why don't the time field get updated for all rows inserted into target? When I try and set a break point to debug during replication, I get the following error:
So I click one, and get the following for each one:
So I go to SE38 and try to activate each one individually:
I did not write the code in these additional programs, and do not understand how they relate to the INCLUDE I wrote. I am left thinking the INCLUDE transform I wrote is not being executed due to the background programs not being active?

Answer 1

The below code resolved my issue.
STATICS lv_syn_name TYPE tabname.
DATA con_name TYPE dbcon_name.
DATA lv_timestamp TYPE timestampl.
FIELD-SYMBOLS <lv_operation> TYPE any.
FIELD-SYMBOLS: <lt_log_tab> TYPE table,
<ls_log_tab> TYPE any,
<lv_primary_key_1> TYPE any,
<lv_primary_key_2> TYPE any,
<lv_primary_key_3> TYPE any,
<lv_primary_key_4> TYPE any.
*
*
*
** get operation flag
ASSIGN COMPONENT 'IUUC_OPERAT_FLAG' OF STRUCTURE <wa_s_ausp> TO <lv_operation>.
*
*
IF sy-subrc = 0 AND
<lv_operation> = 'D'.
*
*
**** replication mode and record was deleted
IF lv_syn_name IS INITIAL.
* get synonym name in case of multi use active
CALL METHOD cl_iuuc_tab_ident_access=>get_ident
EXPORTING
iv_mt_id = _mt_id
iv_tabname = _cobj_alias
* iv_tabname = 'AUSP'
iv_system_type = cl_iuuc_tab_ident_access=>co_system_receiver
iv_ident_type = cl_iuuc_tab_ident_access=>co_ident_synonym
IMPORTING
ev_full_name = lv_syn_name.
IF lv_syn_name IS INITIAL.
* set message
allog_msg 'E' 'DMC_RT_MSG' '000'
'Get Synonym Error' space space space 'IL '.
RAISE stopped_by_rule.
ENDIF.
ENDIF.
*
*
*
**** set additional target fields
GET TIME STAMP FIELD lv_timestamp.
CONCATENATE _mt_id ':R:R' INTO con_name.
UPDATE (lv_syn_name) CLIENT SPECIFIED CONNECTION (con_name)
SET deleted = 'X'
delete_time = lv_timestamp
WHERE mandt = <wa_s_ausp>-mandt
AND objek = <wa_s_ausp>-objek
AND atinn = <wa_s_ausp>-atinn
AND atzhl = <wa_s_ausp>-atzhl
AND mafid = <wa_s_ausp>-mafid
AND klart = <wa_s_ausp>-klart
AND adzhl = <wa_s_ausp>-adzhl.
IF sy-subrc <> 0.
DATA(lc_subrc) = sy-subrc.
DATA lc_ausp TYPE c LENGTH 100.
CONCATENATE <wa_s_ausp>-mandt <wa_s_ausp>-objek <wa_s_ausp>-atinn <wa_s_ausp>-atzhl <wa_s_ausp>-mafid <wa_s_ausp>-klart <wa_s_ausp>-adzhl
INTO lc_ausp SEPARATED BY ','.
* set message
allog_msg 'E' 'DMC_RT_MSG' '000'
'Update Error' space space space 'IL '.
allog_msg 'E' 'DMC_RT_MSG' '000'
'Error Details:' lv_syn_name _cobj_alias lc_subrc 'IL '.
allog_msg 'E' 'DMC_RT_MSG' '000'
'Table Details:' lc_ausp space space 'IL '.
RAISE stopped_by_rule.
ENDIF.
**** do not replicate delete
skip_record.
ELSEIF sy-subrc = 0 AND <lv_operation> = 'I'.
GET TIME STAMP FIELD <wa_r_ausp>-insert_time.
ELSEIF sy-subrc = 0 AND <lv_operation> = 'U'.
GET TIME STAMP FIELD <wa_r_ausp>-update_time.
ELSE.
*Initial load branch
GET TIME STAMP FIELD <wa_r_ausp>-insert_time.
ENDIF.