I have been reading about securing REST APIs and have read about oAuth and JWTs. Both are really great approaches, but from what I have understood, they both work after a user is authenticated or in other words "logged in". That is based on user credentials oAuth and JWTs are generated and once the oAuth token or JWT is obtained the user can perform all actions it is authorized for.
But my question is, what about the login and sign up apis? How does one secure them? If somebody reads my javascript files to see my ajax calls, they can easily find out the end points and the parameters passed, and they could hit it multiple times through some REST Client, more severely they could code a program that hits my sign up api say a thousand times, which would be create a thousand spam users, or they could even brute force the login api. So how does one secures them?
I am writing my API in yii2.
The Yii 2.0 framework has a buil-in filter called yii\filters\RateLimiter that implements a rate limiting algorithm based on the leaky bucket algorithm. It will allow you to limit the maximum number of accepted requests in a certain interval of time. As example you may limit both login and signup endpoints to accept at most 100 API calls within a 10 minutes interval of time. When that limit is exceeded a yii\web\TooManyRequestsHttpException exception (429 status code) will be thrown.
You can read more about it in the Yii2 RESTful API related documentation or within this SO post.
I didn't use it myself so far but from what I did read about it in official docs, and I mean this:
Note that RateLimiter requires
$user
to implement the
yii\filters\RateLimitInterface.
RateLimiter will do nothing if
$user
is not set or does not implement
yii\filters\RateLimitInterface.
I guess it was designed to work with logged in users only maybe by using the user related database table, the default one introduced within the advanced template. I'm not sure about it but I know it needs to store the number of allowed requests and the related timestamp to some persistent storage within the saveAllowance method that you'll need to define in the user class. So I think you will have to track your guest users by IP addresses as #LajosArpad did suggest then maybe redesigning your user class to hold their identities so you can enable it.
A quick google search let me to this extension:yii2-ip-ratelimiter to which you may also have a look.
Your URLs will easily be determined. You should have a black list of IP addresses and when an IP address acts suspiciously, just add it to the black list. You define what suspicious is, but if you are not sure, you can start with the following:
Create something like a database table with this schema:
ip_addresses(ip, is_suspicious, login_attempts, register_attempts)
Where is_suspicious means it is blacklisted. login_attemtps and register_attempts should be json values, showing the history of that ip address trying to log in/register. If the last 20 attempts were unsuccessful and were within a minute, then the ip address should be blacklisted. Blacklisted ip addresses should receive a response that they are blacklisted whatever their request was. So if they deny your services or try to hack things, then you deny your services from them.
Secure passwords using sha1, for example. That algorithm is secure-enough and it is quicker than sha256, for instance, which might be an overkill. If your API involves bank accounts or something extremely important like that, important-enough for the bad guys to use server parks to hack it, then force the users to create very long passwords, including numbers, special characters, big and small letters.
For javascript you should use OAuth 2.0 Implicit Grant flow like Google or Facebook.
Login and Signup use 2 basic web page. Don't forget add captcha for them.
For some special client such as mobile app or webServer:
If you sure that your binary file is secure, You can create a custom login API for it. In this API you must try to verify your client.
A simple solution, you can refer:
use an encryption algorithm such as AES or 3DES to encrypt password
from client use a secret key (only client and server knows about it)
use a hash algorithm such as sha256 to hash (username + client time + an other
secret key). Client will send both client time and hash string to
server. Server will reject request if client time is too different
from server or hash string is not correct.
Eg:
api/login?user=user1&password=AES('password',$secret_key1)&time=1449570208&hash=sha256('user1'+'|'+'1449570208'+'|'+$secret_key2)
Note: In any case, server should use captcha to avoid brute force attack, Do not believe in any other filter
About captcha for REST APIs, we can create captcha base on token.
Eg.
For sign up action: you must call 2 api
/getSignupToken : to get image captcha url and a signup token
respectively.
/signup : to post sign up data (include signup token and
captcha typed by user)
For login action: we can require captcha by count failed logins base on username
Folow my api module here for reference. I manager user authentication by access token. When login, i generate token, then access again, client need send token and server will check.
Yii2 Starter Kit lite
Related
My service allow any HTML documents to be converted to PDF using a POST request.
It is mostly used on the backend of my client's server and thus, the API key used for the communication is kept private.
Now, I'm thinking of a way to let my client's visitors be able to call my service on behalf of my client API key, without exposing this secure API Key.
My main issue here is security. If my client add an XHR POST requests that contains the API key, someone can take that API key and use it for their own purpose and abusing my client's account.
I could filter by domain, but this is easily spoofed so it's not possible.
I was wondering if there was a way to call a private service and be identified without risking its identity to be stolen, from the client ('s client) side?
If you're providing this sublet for authenticated users, then it's fairly trivial to give them unique keys (something that hashes their user ID or session against the API key and an initial timestamp, and checks it / logs it / looks for brutes before accessing the API). If you're doing it on the open web, without any kind of user authentication, then rate limiting gets very tricky indeed. Generally you'd want to use a combination of session hashes, IP address, operating system and browser data to create an anonymous profile that gets a temporary key on the frontend. One fairly solid way to do this is to force users through a CAPTCHA before serving a temporary key that allows them a limited number of uses of the permanent key. Any user whose ip/browser/session matches the existing attributes of a known client key is shunted to that one (and gets to skip the CAPTCHA); anyone who doesn't match an existing profile gets the CAPTCHA. That makes you a less attractive target for spoofing. On top of that, you should always rate-limit the entire thing, within a reasonable number of hits per day based on what kind of traffic you expect (or can afford), just so you don't have any surprises. This is the minimal security you'd want if your client's money is on the line every time their API key is used. It will require a simple database to store these "profiles", track usage, check for brutes and maintain the currently valid client keys. Client keys should always be expired regularly - either with a time diff against when they were created, or a regular cron process, or a maximum number of uses, etc.
One other thing I frequently do is rate-limit based on a curve. If I think 5 uses per minute is reasonable, for example, then after 5 uses in a minute from a session, each usage adds a delay of a fraction of a second * the number of uses in the last minute, squared, before the data is served.
The best answer would be to put this all behind a login system and secure that.
Assuming that you are using OAuth kind of system, In that case, make use of Access Token Mechanism that provides access to private API/User's data on behalf of User(Client) without exposing his/her credentials or API Key(Authentication key), also the access token can be expired based on the time/usage.
Example: The access token is generated against a single endpoint that can be the Html Conversion endpoint and will be expired once the action completion.
https://auth0.com/docs/tokens/access-token
And following blog post would be helpful to architect your authentication system
https://templth.wordpress.com/2015/01/05/implementing-authentication-with-tokens-for-restful-applications/
there is no good way to do front-end secure storage but my recommendation is :
is an API that used HMAC signing of requests in combination with OAuth authentication. The API key is actually a signing key. they key does not get transferred. The API key can still get found on the front-end but it becomes useless because you still need the OAuth token to send a valid request.
i know users will have to login in, but you can see this as an advantage because atleast you can log who is using the app by getting information from oauth.
please consider back-end secure storage!
You can use JWT tokens in my opinion. On the basis of username, password or any other info you can generate unique jwt tokens for different users.
Anyone can decipher these jwt tokens but not he unique security token.
If you want to add more more security to tokens, use JWE, encrypted web tokens.
More about these schemes can be found at https://medium.facilelogin.com/jwt-jws-and-jwe-for-not-so-dummies-b63310d201a3
Hashing is a decent option and should be done anyway, but for a fully secure method that wouldn't add too much complexity, you could simply abstract away from the authorization/API key by building your own API to interface with the API. This way you could both limit the kinds of things that can be done with the API key and also completely obscure the API key from the user
I don't think you should always go for user auth or JWT, it just doesn't fit all use cases. The idea of using a Captcha is interesting but also somewhat complex.
If complexity is not an issue I would rather use an infrastructure approach, I'm most familiar with AWS so I'll focus on that. Assuming you can change the host of your front end you can have your site hosted on an S3 bucket, served through a CDN, and create a proxy Lambda function that will hold the logic to call your API and store the API key as an encrypted environment variable. This Lambda you call through an API Gateway that can only be called by a specific IAM role which the S3 bucket also uses. You can also use a Cognito User Pool without authentication.
Going back to a simpler alternative the Captcha approach can be implemented as an attestation provider. I know of two services that do this, Firebase and KOR Connect. Due to Firebase using this approach only for their own resources as of the time of this writing I much rather use KOR Connect as it’s a very simple middleware that basically solves this issue. I won't go into detail about these services as it’s not the main concern of this topic but you can check the documentation their respective links.
I know this is not the first time the topic is treated in StackOverflow, however, I have some questions I couldn't find an answer to or other questions have opposed answers.
I am doing a rather simple REST API (Silex-PHP) to be consumed initially by just one SPA (backbone app). I don't want to comment all the several authentication methods in this question as that topic is already fully covered on SO. I'll basically create a token for each user, and this token will be attached in every request that requires authentication by the SPA. All the SPA-Server transactions will run under HTTPS. For now, my decision is that the token doesn't expire. Tokens that expire/tokens per session are not complying with the statelessness of REST, right? I understand there's a lot of room for security improvement but that's my scope for now.
I have a model for Tokens, and thus a table in the database for tokens with a FK to user_id. By this I mean the token is not part of my user model.
REGISTER
I have a POST /users (requires no authentication) that creates a user in the database and returns the new user. This complies with the one request one resource rule. However, this brings me certain doubts:
My idea is that at the time to create a new user, create a new token for the user, to immediately return it with the Response, and thus, improving the UX. The user will immediately be able to start using the web app. However, returning the token for such response would break the rule of returning just the resource. Should I instead make two requests together? One to create the user and one to retrieve the token without the user needing to reenter credentials?
If I decided to return the token together with the user, then I believe POST /users would be confusing for the API consumer, and then something like POST /auth/register appears. Once more, I dislike this idea because involves a verb. I really like the simplicity offered in this answer. But then again, I'd need to do two requests together, a POST /users and a POST /tokens. How wrong is it to do two requests together and also, how would I exactly send the relevant information for the token to be attached to a certain user if both requests are sent together?
For now my flow works like follows:
1. Register form makes a POST /users request
2. Server creates a new user and a new token, returns both in the response (break REST rule)
3. Client now attaches token to every Request that needs Authorization
The token never expires, preserving REST statelessness.
EMAIL VALIDATION
Most of the current webapps require email validation without breaking the UX for the users, i.e the users can immediately use the webapp after registering. On the other side, if I return the token with the register request as suggested above, users will immediately have access to every resource without validating emails.
Normally I'd go for the following workflow:
1. Register form sends POST /users request.
2. Server creates a new user with validated_email set to false and stores an email_validation_token. Additionally, the server sends an email generating an URL that contains the email_validation_token.
3. The user clicks on the URL that makes a request: For example POST /users/email_validation/{email_validation_token}
4. Server validates email, sets validated_email to true, generates a token and returns it in the response, redirecting the user to his home page at the same time.
This looks overcomplicated and totally ruins the UX. How'd you go about it?
LOGIN
This is quite simple, for now I am doing it this way so please correct me if wrong:
1. User fills a log in form which makes a request to POST /login sending Basic Auth credentials.
2. Server checks Basic Auth credentials and returns token for the given user.
3. Web app attached the given token to every future request.
login is a verb and thus breaks a REST rule, everyone seems to agree on doing it this way though.
LOGOUT
Why does everyone seem to need a /auth/logout endpoint? From my point of view clicking on "logout" in the web app should basically remove the token from the application and not send it in further requests. The server plays no role in this.
As it is possible that the token is kept in localStorage to prevent losing the token on a possible page refresh, logout would also imply removing the token from the localStorage. But still, this doesn't affect the server. I understand people who need to have a POST /logout are basically working with session tokens, which again break the statelessness of REST.
REMEMBER ME
I understand the remember me basically refers to saving the returned token to the localStorage or not in my case. Is this right?
If you'd recommend any further reading on this topic I'd very much appreciate it. Thanks!
REGISTER
Tokens that expire/tokens per session are not complying with the statelessness of REST, right?
No, there's nothing wrong with that. Many HTTP authentication schemes do have expiring tokens. OAuth2 is super popular for REST services, and many OAuth2 implementations force the client to refresh the access token from time to time.
My idea is that at the time to create a new user, create a new token for the user, to immediately return it with the Response, and thus, improving the UX. The user will immediately be able to start using the web app. However, returning the token for such response would break the rule of returning just the resource. Should I instead make two requests together? One to create the user and one to retrieve the token without the user needing to reenter credentials?
Typically, if you create a new resource following REST best practices, you don't return something in response to a POST like this. Doing this would make the call more RPC-like, so I would agree with you here... it's not perfectly RESTful. I'll offer two solutions to this:
Ignore this, break the best practices. Maybe it's for the best in this case, and making exceptions if they make a lot more sense is sometimes the best thing to do (after careful consideration).
If you want be more RESTful, I'll offer an alternative.
Lets assume you want to use OAuth2 (not a bad idea!). The OAuth2 API is not really RESTful for a number of reasons. I'm my mind it is still better to use a well-defined authentication API, over rolling your own for the sake of being RESTful.
That still leaves you with the problem of creating a user on your API, and in response to this (POST) call, returning a secret which can be used as an access/refresh token.
My alternative is as follows:
You don't need to have a user in order to start a session.
What you can do instead is start the session before you create the user. This guarantees that for any future call, you know you are talking to the same client.
If you start your OAuth2 process and receive your access/refresh token, you can simply do an authenticated POST request on /users. What this means is that your system needs to be aware of 2 types of authenticated users:
Users that logged in with a username/password (`grant_type = passsword1).
Users that logged in 'anonymously' and intend to create a user after the fact. (grant_type = client_credentials).
Once the user is created, you can assign your previously anonymous session with the newly created user entity, thus you don't need to do any access/refresh token exchanges after creation.
EMAIL VALIDATION
Both your suggestions to either:
Prevent the user from using the application until email validation is completed.
Allow the user to use the application immediately
Are done by applications. Which one is more appropriate really depends on your application and what's best for you. Is there any risk associated with a user starting to use an account with an email they don't own? If no, then maybe it's fine to allow the user in right away.
Here's an example where you don't want to do this: Say if the email address is used by other members of your system to add a user as a friend, the email address is a type of identity. If you don't force users to validate their emails, it means I can act on behalf of someone with a different email address. This is similar to being able to receive invitations, etc. Is this an attack vector? Then you might want to consider blocking the user from using the application until the email is validated.
You might also consider only blocking certain features in your application for which the email address might be sensitive. In the previous example, you could prevent people from seeing invitations from other users until the email is validated.
There's no right answer here, it just depends on how you intend to use the email address.
LOGIN
Please just use OAuth2. The flow you describe is already fairly close to how OAuth2 works. Take it one step further an actually use OAuth2. It's pretty great and once you get over the initial hurdle of understanding the protocol, you'll find that it's easier than you thought and fairly straightforward to just implement the bits you specifically need for your API.
Most of the PHP OAuth2 server implementations are not great. They do too much and are somewhat hard to integrate with. Rolling your own is not that hard and you're already fairly close to building something similar.
LOGOUT
The two reasons you might want a logout endpoint are:
If you use cookie/session based authentication and want to tell the server to forget the session. It sounds like this is not an issue for you.
If you want to tell the server to expire the access/refresh token earlier. Yes, you can just remove them from localstorage, and that might be good enough. Forcing to expire them server-side might give you that little extra confidence. What if someone was able to MITM your browser and now has access to your tokens? I might want to quickly logout and expire all existing tokens. It's an edge case, and I personally have never done this, but that could be a reason why you would want it.
REMEMBER ME
Yea, implementing "remember me" with local storage sounds like a good idea.
I originally took the /LOGON and /LOGOUT approach. I'm starting to explore /PRESENCE. It seems it would help me combine both knowing someone's status and authentication.
0 = Offline
1 = Available
2 = Busy
Going from Offline to anything else should include initial validation (aka require username/password). You could use PATCH or PUT for this (depending how you see it).
You are right, SESSION is not allowed in REST, hence there is no need to login or logout in REST service and /login, /logout are not nouns.
For authentication you could use
Basic authentication over SSL
Digest authentication
OAuth 2
HMAC, etc.
I prefer to use PUBLIC KEY and PRIVATE KEY [HMAC]
Private key will never be transmitted over web and I don't care about public key. The public key will be used to make the user specific actions [Who is holding the api key]
Private key will be know by client app and the server. The private key will be used to create signature. You generate a signature token using private key and add the key into the header. The server will also generate the signature and validate the request for handshake.
Authorization: Token 9944b09199c62bcf9418ad846dd0e4bbdfc6ee4b
Now how you will get private key? you have to do it manually like you put facebook, twitter or google api key on you app.
However, in some case you can also return [not recommended] the key only for once like Amazon S3 does. They provide "AWS secret access key" at the registration response.
I want to write a google chrome extension, that should make a request to my website to send and get some data, so, actually I should do an ajax request like it is written here https://developer.chrome.com/extensions/xhr.html
var xhr = new XMLHttpRequest();
xhr.open("GET", "http://api.example.com/data.json", true);
I wanted ask if there is a way to somehow secure the code or prevent others from using my api, because actually the other users can see the source code of the extension when they install it and so use my api without me being aware of it.
EDIT:
If I need to make some sort of authentication, than how can I authenticate the user before making the ajax call ? for authentication I will need to send a request to my server , but for that I should send , e.g. username and password, that should be saved somewhere in the extension's files, which, in fact, can be seen by the users, when they install the extension.
Thanks
Don't trust the browser, take steps to authenticate the user instead. So, in this case, you could require that YOU enter in a password that is used to communicate with your server.
Your Google extension would simple require you to enter in a password before it attempts to use AJAX to communicate with your server.
Be aware that you should build in means of protecting yourself from brute-force attacks. So, do things like lock everything down if there are more than some small number of wrong passwords, etc.
You could also consider using the password to simply decrypt the destination of the XHR, but if you go this route, you should store this very carefully, because this will be brute-forceable offline.
EDIT
Trying to lock down an API so that only a single application can use it is just not practical nor technically possible, so you're only hope of doing this is to authenticate the user using the API, regardless of the accessing software he is using. You could have the user sign an agreement that legally limits them to only your extension, but I suspect this will go largely unenforceable and will consume your time tracking abusers down.
If you don't want unauthorized people even knowing where the API is, you could perform authentication using an out-of-band mechanism: over the telephone, email, SMS, or simply, another API that will grant the user a password or token that requests to your API must be accompanied with.
During this out-of-band process, you could also grant the user, a unique URI (the API access point) that is only valid per authenticated session (https://api.totally-cool-extension.com/api/ijyeDvB5dYvSiWG97OLuTAoNWwbhuZ0/, for example). Any requests to your server on OTHER URIs simply won't work. However, this isn't theoretically much different than using the same API access point, and having a good password. It just changes the number of places in your architecture that will be performing authentication and/or authorization checks.
<aside>My vote would be to reduce the number of authorization/authentication points to as few as possible so that you can spend more time on getting that one place correct rather than having multiple places and possibly multiple logic flaws or other things that could lead to vulnerabilities.</aside>
You could also explore using Public Key Infrastructure and/or one-time passwords schemes or device-based token generators, etc., but in the end, you'll be allowing authenticated and authorized users to use your API. And, thanks to the Internet, this will not remain an undisclosed URI for long.
And, more importantly, it will not prevent someone from using the data on their own. Even with all these measures in place, it would be trivial for an authorized user to collect this data as it is being streamed to your extension. Or, if you employ point-to-point encryption, they could screen-scrap or use some form of JS introspection on your very code or even extract the data from their computer's memory.
I know you were looking for a silver bullet here, but it doesn't exist.
I think you are doing it wrong. You should never trust what's going on on internet users PC's. Never!
Move the line of trust one step inward, make your API public and then design the security where you have perfect control - server side.
I could not get correct aspect of your use case
Few Points:
Your extension code is always traceable( Any one who has installed extension can view the code)
If you are looking for security through complicated or obfuscated coding patterns you end up slow down of understanding process not the whole.
If your target is to ensure users who install your extension should be able to access and inert all other users( Who have gained illegal access or downloaded and edited code) have a session shared key per installation.
Please explain further use case so i can help you better.
I'd like to embed some of my code on GitHub into my blog. The best way I've found so far for this is to use http://www.jamesward.com/2012/06/15/dynamically-rendering-github-files-in-web-pages (with a small modification to fix the base64 decoding) and then do some custom syntax highlighting on it.
However, without authentication, this is subject to a 60 request/hour rate limit enforced by GitHub. It's not clear to me how authentication could work in this case -- since any auth token I might use will need to be part of the JavaScript on my blog, so it will basically be public...
And also, even if I could somehow authenticate this usage (by perhaps connecting my Origin domain with my GitHub user account?), won't that mean that all readers of my blog will count against this shared rate limit, vs. the unauthenticated case where every reader is counted against his own 60/hour limit?
To answer the second question first -- yes, that is what would happen. When authenticated - you have a single quota shared between users. When unauthenticated - the quotas are "distributed" between users (based on IP address, I guess).
Regarding authenticated communication with GitHub's API from JavaScript -- yes, you would have to put the token (or username and password) into your script and make it public. Which you obviously do not want to do. The way you are "expected" to solve this problem is to have a server side. The JavaScript executing in the browser would communicate with your server (for which there is no rate limit and you can secure it however you want), and the server would communicate with GitHub's API and return the results to your JS script. Since nobody can see into your server's code, the credentials for authenticating are not public.
Which are the steps must I follow to implement a token authentication in my web page?
Any summary or links will be appreciated.
I want to implement similar to Facebook or Google, first time client loggin and receive token and then use it in next actions.
I read also about OAuth but I don't want to give access to my application from 3rd party.
Thanks for the long response and it seems clear to me I need to read more about this.
What I want is to know the "steps" to implement a basic web application that uses token authentication. That is user logging once and then can make some actions: add content, edit, etc.
I know what I'm saying is similar to a session, where server adds a SESSION_ID on the HTML header and later request are identified and associated with that session. I read sessions way isn't good to scale so I want to implement a similar system like gmail or facebook before they go to OAuth. Probably I'm talking about something similar to oauth (i don't read in much depth) but witj two-legged instead three-legged.
You should think about your requirements, pick an appropriate protocol and some decent piece of software that implements it.
It's really hard to say more without more details:
are you talking about authentication for one or for multiple web applications? do you need single sign on between different web applications?
should all user data be stored on your server or should user be able to login e.g. with the google account?
should the token contain informations about the user?
on what platform are your applications developed?
what authentication method should be used?
do you want to realize a portal?
There is a really wide range of protocols and tools which might or might not fit to your requirements:
http://en.wikipedia.org/wiki/Category:Authentication_methods
http://en.wikipedia.org/wiki/Category:Identity_management_systems
I personally like CAS ( http://www.jasig.org/cas) for token-base SSO between multiple web applications. It's Java based but also has some support for PHP and .Net.
OpenID is fine, if you want to allow users to login with their Google, Yahoo, whatever account (configurable...) and don't want to store user information by yourself.
Kerberos/SPNEGO is the way to go if you want to haven integrated windows-sso for your corporate intranet applications.
For university applications SAML/Shibboleth probably is best. Outside universities it's somewhat less popular, probably cause it's a fairly complex protocol.
Oh and I almost forget: Most of the web frameworks/standards have there own version of plain-old "form based authentication". Where a user goes to a login form enters its username and password. Both are with or without SSL transported to the web/application server. The server validates it against some kind of database and gives a cookie to the user, which is transmitted and validated every time the user sends a request. But beside all this shiny protocols this seems to be pretty boring :-)
And before doing anything with web authentication, you might think for a moment about web security in general ( http://journal.paul.querna.org/articles/2010/04/11/internet-security-is-a-failure/ http://www.eff.org/files/DefconSSLiverse.pdf) and what you can do to not make it even worse on your site ( http://www.codinghorror.com/blog/2008/08/protecting-your-cookies-httponly.html http://owasptop10.googlecode.com/files/OWASP%20Top%2010%20-%202010.pdf).
see your point.
On the protocol level a very simplistic token approach is HTTP Basic Authentication. But this often doesn't fit, as there is no logout function etc.
A custom, simple cookie based approach can for example look like this:
The server generates some kind of secret (a value that is hard to guess)
When a user tries to access a protected resource, he is redirected to a login form
after successful authentication he gets a cookie. This cookie contains three values: username, timestamp and a hash of {username server-secret timestamp}.
with every user request the server recalculates the hash values and compares it to the value which the client sends in its cookie
(needs more consideration of: httponly and secure flag, transport layer security, replay attacks etc)
Amazon S3 stores its authentication token in an HTTP Header and uses HMAC for calculating it. It's described here: http://docs.amazonwebservices.com/AmazonS3/latest/dev/index.html?S3_Authentication.html (Not necessarily recommended for using with a browser based web application)
If there is a book about REST anywhere near you, you may look if it has a chapter about authentication. Probably things are much nicer explained there than here :-)
There are some frameworks which are capable of doing this kind of authentication. For security reasons it would make sense to check them first before implementing your own stuff.