I'm using oracle db. I want to be able to count the number of times that a SQL statement was executed in X hours. For instance, how many times has the statement Select * From ExampleTable been executed in the past 5 hours?
I tried looking in V$SQL, V$SQLSTATS, V$SQLAREA, but they only keep a record of a statement's total amount of executions. They don't store what times the individual executions occurred. Is there any view I missed, or something else that does keep track of each individual statement execution + timestamp so that I can query by which have occurred X hours ago? Thanks for the help.
The views in the Active Workload Repository store historical SQL execution information, specifically the view DBA_HIST_SQLSTAT.
The view is not perfect; it contains a summary of the top SQL statements. This is almost perfect information for performance tuning - in practice, sampling will catch any performance problem. But if you're looking for a perfect record of every SQL execution, as far as I know the only way to get that information is through tracing, which is buggy and slow.
Hopefully this query is good enough:
select begin_interval_time, end_interval_time, executions_delta, dba_hist_sqlstat.*
from dba_hist_sqlstat
join dba_hist_snapshot
on dba_hist_sqlstat.snap_id = dba_hist_snapshot.snap_id
and dba_hist_sqlstat.instance_number = dba_hist_snapshot.instance_number
order by begin_interval_time desc, sql_id;
Apologies for putting this in an answer instead of a comment (I don't have the required reputation), but I think you may be out of luck. Here is an AskTOM asking basically the same question: AskTOM. Tom says unless you are using ASH that just isn't something the database is designed to do.
I have the following query that I've ran:
SELECT TOP 100 certs.CertId, COUNT(cluster.BGTJobId) C
FROM [CentralDB_US_33].[dbo].[JobSkillClusterIndex] cluster
INNER JOIN [Eagle].[raw].[certs] certs
ON certs.BGTJobId = cluster.BGTJobId
GROUP BY cluster.skillClusterId, certs.CertId
Ultimately, I want to get the full results and not just the top 100, but for previewing purposes, is this the fastest way to go?
Since you've mentioned this is for preview purposes, so I'm assuming you just want data out of the query and you want it to run FAST regardless of the data it returns, and seeing that you mentioned that the query takes 14 minutes to execute, a quick 'hack-fix' would be to use something like below:
SELECT
certs.CertId
, COUNT(cluster.BGTJobId)
FROM
(SELECT TOP 100
certs.CertId
FROM [Eagle].[raw].[certs] certs) certs
INNER JOIN [CentralDB_US_33].[dbo].[JobSkillClusterIndex] cluster
ON certs.BGTJobId = cluster.BGTJobId
GROUP BY cluster.skillClusterId, certs.CertId
Aggregating data (in your case COUNT) is a very expensive operation and should be done only at the last part of the query on as little data as possible. That is why, for "preview" purposes I have selected onyl the first 100 certificates and made the COUNT on that data.
However, because you mentioned that the query takes 14 minutes to run, the problems are elsewhere and usually this is due to design (query design, index design or even table design).
You should ask yourself if you really want to go over all of the data in the tables and get all of the matching rows from both tables, and aren't you possibly missing a WHERE clause?
If you do decide that there is a WHERE clause needed, are there any indexes to help filtering the data based on the conditions of your WHERE clause (and even the join columns - certs.BGTJobId and cluster.BGTJobId?
Yes top select query is fastest for preview purposes that why its also shown in management studio GUI right click. But if you are running custom query just check that where clause / grouping etc are done is part of the clustered index.
I'm experiencing something rather strange with some queries that I'm performing in BigQuery.
Firstly, I'm using an externally backed table (csv.gz) with about 35 columns. The total data in the location is around 5Gb, with an average file size of 350mb. The reason I'm doing this, is that I continually add data and remove to the table on a rolling basis - to give me a view of the last 7 days of our activity.
When querying, if perform something simple like:
select * from X limit 10
everything works fine. It continues to work fine if you increase the limit up to 1 million rows. As soon as you up the limit to ten million:
select * from X limit 10000000
I end up with a tableUnavailable error "Something went wrong with the table you queried. Contact the table owner for assistance. (error code: tableUnavailable)"
Now according to to any literature on this, this usually results from using some externally owned table (I'm not). I can't find any other enlightening information for this error code.
Basically, If I do anything slightly complex on the data, I get the same result. There's a column called event that has maybe a couple hundred of different values in the entire dataset. If I perform the following:
select eventType, count(1) from X group by eventType
I get the same error.
I'm getting the feeling that this might be related to limits on external tables? Can anybody clarify or shed any light on this?
Thanks in advance!
Doug
I have an INSERT query in Oracle 10g that is getting stuck on a "SQL*Net message from dblink" event. It looks like:
INSERT INTO my_table (A, B, C, ...)
SELECT A, B, C, ... FROM link_table#other_system;
I do not see any locks on my_table besides the one from the INSERT I'm trying to do. The SELECT query on link_table#other_system completes without any trouble when run on its own. I only get this issue when I try to do the INSERT.
Does anyone know what could be going on here?
UPDATE
The SELECT returns 4857 rows in ~1.5 mins when run alone. The INSERT was running over an hour with this wait message before I decided to kill it.
UPDATE
I found an error in my methods. I was using a date range to limit the results. The date range I used when testing the SELECT only was before the last OraStats run on the link_table, but the date range that I used when testing the INSERT was after the last OraStats run on the link_table. So, that mislead me to believe there was a problem with the INSERT. Not very scientific of me to do this; my mistake.
SQL*Net message from dblink generally means that your local system is waiting on the network to transfer the data across the network. It's a very normal wait event for this sort of query.
How many rows does the SELECT statement return? How much data (in MB/ GB) does that represent?
When you say that it "completes without any trouble on its own", are you actually fetching all the data? If you're using something like TOAD or SQL Developer, the GUI will generally fetch the first N rows and return to you. That can be very quick but it doesn't imply that the database is done executing the query-- it may take much more time to finish producing all the rows your query is going to return. It's pretty common for people to measure the time required to fetch the first N rows rather than the time to fetch the last row-- your INSERT statement, obviously, can't return until all the rows have been fetched from the remote table.
Are you using a /*+ driving_site(link_table) */ hint to make Oracle perform the joins on the remote server?
If so, that hint will not work with DML, as explained by Jonathan Lewis on this page.
This may be a rare case where running the query just as a SELECT uses a very different plan than running the query as part of an INSERT. (You will definitely want to learn how to generate explain plans in your environment. Most tools have a button to do this.)
As Andras Gabor recommended in the link, you may want to use PL/SQL BULK COLLECT to improve performance. This may be a rare case where PL/SQL will work faster than SQL.
BACKGROUND:
I've been trying to streamline the work involved in running a report in my program. Lately, I've had to supply a listing of job numbers an instrument has been used on with the listing of items for cost/benefit analysis. Mostly to see how often an instrument is used since it was last serviced/calibrated and the last time anyone did use it. I was looking to integrate this into the query that helps generate the report - but I keep hitting a brick wall of sorts with the number of uses - since I want that aggregate to be based on the date the instrument was last calibrated (a field based in the same query). I can get it to give me the number of uses in the system total - but it will not accept the limitation that I want it to be only counting the times used since the last time it was calibrated
PROBLEM:
Attempts to put an aggregate function in my report for the number of uses since the item's calibration are met either with undesired results, or the dreaded 'aggregate missing' error (don't remember the exact warning).
-- Edited to add 8/12/2011 # 16:09 --
An additional problem with the use of the Max aggregate has been found for instruments that have never been used being excluded by this query.
DETAILS:
Here is the query that does work so far:
SELECT
dbo_tblPOGaugeDetail.intGagePOID,
dbo_tblPOGaugeDetail.strGageDetailID,
dbo_Gage_Master.Description,
dbo_Gage_Master.Manufacturer,
dbo_Gage_Master.Model_No,
dbo_Gage_Master.Gage_SN,
dbo_Gage_Master.Unit_of_Meas,
dbo_Gage_Master.User_Defined,
dbo_Gage_Master.Calibration_Frequency,
dbo_Gage_Master.Calibration_Frequency_UOM,
dbo_tblPOGaugeDetail.bolGageLeavePriceBlank,
dbo_tblPOGaugeDetail.intGageCost,
dbo_Gage_Master.Last_Calibration_Date,
dbo_Gage_Master.Next_Due_Date,
dbo_tblPOGaugeDetail.bolGageEvaluate,
dbo_tblPOGaugeDetail.bolGageExpedite,
dbo_tblPOGaugeDetail.bolGageAccredited,
dbo_tblPOGaugeDetail.bolGageCalibrate,
dbo_tblPOGaugeDetail.bolGageRepair,
dbo_tblPOGaugeDetail.bolGageReturned,
dbo_tblPOGaugeDetail.bolGageBER,
dbo_tblPOGaugeDetail.intTurnaroundDaysOut,
qryRCEquipmentLastUse.MaxOfdatDateEntered
FROM (dbo_tblPOGaugeDetail
INNER JOIN dbo_Gage_Master ON dbo_tblPOGaugeDetail.strGageDetailID = dbo_Gage_Master.Gage_ID)
INNER JOIN qryRCEquipmentLastUse ON dbo_Gage_Master.Gage_ID = qryRCEquipmentLastUse.Gage_ID
ORDER BY dbo_tblPOGaugeDetail.strGageDetailID;
But I can't seem to aggregate a count of Uses (making a Count(strCustomerJobNum)) from the tblGageActivity with the following fields:
strGageID
strCustomerJobNum
datDateEntered
datTimeEntered
I tried to add a field to the formerly listed query to do a Count(strCustomerJobNum) where datDateEntered matched the Last_Calibration_Date from the calling query - but I got the 'missing aggregate' error. If I leave this condition out - it will run - but will list every instrument ever sent out only if it's had a usage count of at least one (not what I want at all, sadly).
I also want to make sure that if I should get a zero uses count - I will get a zero back instead of my expected records minus the null results.
I hope someone out there can tell me where I am going wrong with this - I want to save the time I am currently spending running an activity report in another program whenever I want to generate this report. Thanks in advance, and let me know if you need me to post more information.
-- Edited to add 08/15/2011 # 14:41 --
I managed to solve the Max() aggregate problem by creating a 'pure' first-step query to get a listing of all instrument with most modern date as qryRCEquipmentUsed.
qryRCEquipmentLastUse:
SELECT dbo.tblGageActivity.strGageID, Max(dbo.tblGageActivity.datDateEntered) AS datLastDateUsed
FROM dbo.tblGageActivity
GROUP BY dbo.tblGageActivity.strGageID;
Then I created a 'pure' listing of all instruments that have no usage at all as a query named qryRCEquipmentNeverUsed.
qryRCEquipmentNeverUsed:
SELECT dbo_Gage_Master.Gage_ID, NULL AS datLastDateUsed
FROM dbo_Gage_Master LEFT JOIN dbo_tblGageActivity ON dbo_Gage_Master.Gage_ID = dbo_tblGageActivity.strGageID
WHERE (((dbo_tblGageActivity.strGageID) Is Null));
NOTE: The NULL was inserted so that the third combining UNION query will not fail due to a mismatch in the number of fields being retrieved from the tables.
At last, I created a UNION query named qryCombinedUseEquipment to combine the two into a list:
qryCombinedUseEquipment:
SELECT *
FROM qryRCEquipmentLastUse
UNION SELECT *
FROM qryRCEquipmentNeverUsed;
Using this last union query to feed the Last Used date to the parent query works in datasheet view, but when the parent query is called in the report - I get a blank report; so a nudge in the right direction would still be wonderfully appreciated.
APPENDIX
Same script as above, but with shorter table aliases (in case someone finds that clearer):
SELECT
gd.intGagePOID,
gd.strGageDetailID,
gm.Description,
gm.Manufacturer,
gm.Model_No,
gm.Gage_SN,
gm.Unit_of_Meas,
gm.User_Defined,
gm.Calibration_Frequency,
gm.Calibration_Frequency_UOM,
gd.bolGageLeavePriceBlank,
gd.intGageCost,
gm.Last_Calibration_Date,
gm.Next_Due_Date,
gd.bolGageEvaluate,
gd.bolGageExpedite,
gd.bolGageAccredited,
gd.bolGageCalibrate,
gd.bolGageRepair,
gd.bolGageReturned,
gd.bolGageBER,
gd.intTurnaroundDaysOut,
lu.MaxOfdatDateEntered
FROM (dbo_tblPOGaugeDetail gd
INNER JOIN dbo_Gage_Master gm ON gd.strGageDetailID = gm.Gage_ID)
INNER JOIN qryRCEquipmentLastUse lu ON gm.Gage_ID = lu.Gage_ID
ORDER BY gd.strGageDetailID;
Piece by piece...
First -- I suspect you're trying to answer too many questions at once (as evidenced by 23 fields in your SELECT), which will make aggregation near-impossible. Start by narrowing down the scope of the query -- What question is this query attempting to answer? (You can always make more queries to answer other questions... :-)
1) How many uses since last calibration?
2) How many uses since last ...use? (not sure what you mean by that -- maybe last sign-out, or last rental, etc.?)
Tip -- learn to use table aliases. Large queries are difficult to read; worse because of repeated table names.
1) Ex.: dbo_tbl_POGaugeDetail.intGagePOID becomes d.intGagePOID
Here's a sample that might get you started:
SELECT
d.strCustomerJobNum,
Max(d.last_calibration_date) -- not sure what you named that field
Count(d.strCustomerJobNum)
FROM
dbo_tblPOGaugeDetail d
GROUP BY
d.strCustomerJobNum
Does this work:
SELECT dbo_tblPOGaugeDetail.intGagePOID, dbo_tblPOGaugeDetail.strGageDetailID,
OuterGageMaster.Description, OuterGageMaster.Manufacturer, OuterGageMaster.Model_No,
OuterGageMaster.Gage_SN, OuterGageMaster.Unit_of_Meas, OuterGageMaster.User_Defined,
OuterGageMaster.Calibration_Frequency, OuterGageMaster.Calibration_Frequency_UOM,
dbo_tblPOGaugeDetail.bolGageLeavePriceBlank, dbo_tblPOGaugeDetail.intGageCost,
OuterGageMaster.Last_Calibration_Date, OuterGageMasterNext_Due_Date,
dbo_tblPOGaugeDetail.bolGageEvaluate, dbo_tblPOGaugeDetail.bolGageExpedite,
dbo_tblPOGaugeDetail.bolGageAccredited, dbo_tblPOGaugeDetail.bolGageCalibrate,
dbo_tblPOGaugeDetail.bolGageRepair, dbo_tblPOGaugeDetail.bolGageReturned,
dbo_tblPOGaugeDetail.bolGageBER, dbo_tblPOGaugeDetail.intTurnaroundDaysOut,
qryRCEquipmentLastUse.MaxOfdatDateEntered,
(Select Count(strCustomerJobNum)
FROM tblGageActivity WHERE
OuterGageMaster.Last_Calibration_Date=tblGageActivity.datDateEntered) As JobCount
FROM
(dbo_tblPOGaugeDetail INNER JOIN dbo_Gage_Master OuterGageMaster ON
dbo_tblPOGaugeDetail.strGageDetailID = OuterGageMaster.Gage_ID) INNER JOIN
qryRCEquipmentLastUse ON OuterGageMaster.Gage_ID = qryRCEquipmentLastUse.Gage_ID
ORDER BY
dbo_tblPOGaugeDetail.strGageDetailID;
or is that what you tried?
Summary Problem:
Attempts to put an aggregate function in my report for the number of uses since the item's calibration are met either with undesired results, or the dreaded 'aggregate missing' error.
Solution:
I decided to leave the query driving the report alone - instead choosing to employ the use of DLookup and DCount as appropriate to retrieve the last used date from a query that provides the last used date of all the instruments, and the number of uses an instrument has had since it's last calibration, using the aforementioned domain aggregates respectively.
Using the query described in the problem description, I am able to retrieve the last used date for all instruments. I used a =DLookup statement as the source for a text box on the report's subreport dealing with various items as such:
=IIf((DLookUp("[qryRCCombinedUseEquipment]![datLastDateUsed]","[qryRCCombinedUseEquipment]","[qryRCCombinedUseEquipment]![strGageID]=[strGageDetailID]")) Is Null Or ([bolGageReturned]=True),"",DLookUp("[qryRCCombinedUseEquipment]![datLastDateUsed]","[qryRCCombinedUseEquipment]","[qryRCCombinedUseEquipment]![strGageID]=[strGageDetailID]"))
This allows items that have never been used to return a NULL result, which will display as a blank text box.
The number of uses, however, would not feed off a query using =DCount (I tried, it would take over ten minutes to retrieve results, if it ever did). However, using the underlying activity table, I used the following statement:
=IIf([bolGageReturned],"","Used " & DCount("[dbo_tblGageActivity]![strGageID]","[dbo_tblGageActivity]","[dbo_tblGageActivity]![strGageID] = [strGageDetailID] And [dbo_tblGageActivity]![datDateEntered] Between [txtLastCalibrationDate] And date()") & " times since last calibration")
It would retrieve a number of times used since the instrument was last calibrated, but no uses that are before that or after today (some jobs are post dated, strangely). Of course, this is SLOW (about thirty seconds for a large document with thirty or forty instruments).
Does anyone else have a better solution for this, or will I have to take the performance hit? If no one has any better ideas, I will accept this as the answer after five days (8/21/2011) .