I am working on Pentaho data integration and I am appending data into an excel sheet. Data is appending into the excel sheet perfectly but I need to provide the border for every cell. Is there anyway anybody can suggest me?
You can make use of Template feature of Microsoft Excel Output and Writer Steps.
1. Create a template with a cell having a border as per your requirement:
2. Use Microsoft Excel Writer step to define the template:
Make sure to make use of "write to existing sheet" in Excel.
3. In the field section of the Step, make sure to add the style Cell number. In my case it was D2 cell. This will read the data and add border to your data set.
Hope this helps :)
Final Output:
Related
I have in table input result as below:
I would like pass this result to excel file in specific row.
For example number_record I want to write to column J5, amount_ma to column K2 and so on. Can something like this be done in pentaho?
I have prepare a solution for you HERE. Using this solution, you can specifically tell which field you want to insert in which position in Excel. Like in my solution i told to insert field [NUMBER_RECORD to C5, AMOUNT_MA to D7,AMOUNT_WD to B5] Please run transformation "getData.ktr".
Add a new sheet to this Excel file, and output a line with the result to the new sheet. And on the old sheet in the cells you need, add formulas with a link to the first row in the new sheet
I'm using VBA to create a series of charts in Excel and then copying them into a Word file.
Up till now I've been pasting the charts as pictures, so in Excel I used
ActiveChart.CopyPicture
and then in Word, after selecting the target location:Selection.Paste.
Now I want to change it so the charts will be editable but not linked to the source Excel file.
I copy a chart from Excel using ActiveChart.ChartArea.Copyand look at the paste-special options in Word, the options "use destination theme/keep source formatting & embed workbook" work fine for me:
the chart is editable (also the data is editable which I don't need but is OK) and there is no link to the original Excel file.
BUT - I can't find how to perform this through VBA code. Trying to record this in a macro only give me Selection.Paste - which pastes a linked chart.
I also tried a different approach - pasting a linked chart, and then killing the link. once again, deleting the links in the link editor doesn't get recorded in the macro at all.
Please help with coding any of these two options or suggesting a different approach.
The Range.PasteAndFormat method should work. This takes a WdRecoveryType Enum parameter that lets you specify what kind of result you want.
Selection.PasteAndFormat(wdChart) 'Enum value 14 in case of late binding
I have two workbooks;
(WB1) with two sheets; "Input" and "Output"
and
(MacroWB) with the macro and a "Column Header" list.
Example file: "Messy" sheet = input, "Organized" = output
https://drive.google.com/file/d/0B-leh2Ii2uh9bDBFbDBHbGcxbUU/view?usp=sharing
I need help coding a macro to do the following:
1) Create a loop to go through each row of the "Input" sheet searching for values matching cells in the "Column Header" list.
2) When a matching value is found; take the data from the cell immediately to it's right (in the "Input" sheet) and paste it into the corresponding column of the "Output" worksheet.
3) Once every "Column Header" item has been searched/pasted for that row; move to the next row of the "Input" sheet. Rinse and repeat until all rows of the "Input" sheet have been searched/pasted.
Here is an example, the letters are to be column headers and the numbers are to be copied to the appropriate "Output" sheet column.
https://drive.google.com/file/d/0B-leh2Ii2uh9TXRGTnFDRU1jY0U/view?usp=sharing
Keep in mind that the actual data file has ~50 columns and ~3000 rows.
Also that the data is not all Letter/Numbers like the table above, it is more like the data in the linked .xlsx file.
If there is anything I haven't been clear about, please ask and I will try my best to clarify. Also I may be WAY over thinking this, if so.. please let me know.
THANK YOU ANYONE THAT CAN GET ME GOING IN THE CORRECT DIRECTION!!!
-Joe
Skip the the VBA and use Text to Columns the Data tab. I'malways copying html and its works 99% of the time. If the html is pretty and properly formated you may get away with using the fixed width option, otherwise gor for the delimted and choose "tab". If tab doesn't work try using spaces, assuming that your cells don't contain spaces.
The other option that I've had work on rare occasions that text to columns doesn't is simply saving the text in word and saving as rtf and then opening that in notepad++ (which everyone should have.) Copy from ++ to excel and that usually fixes the problem.
EDIT: If you right click before pasting and click "paste special" this regularly helps with html pasting.
In your sample file, I used the following formula in A2 of Organized sheet (assumed 50 as max columns in Messy):
=IFERROR(OFFSET(Messy!A1,0,MATCH(Organized!A$1,OFFSET(Messy!A1,0,0,1,50), )),"")
Dragging it to H11 produced the following result:
The sample data is not complete, and some 'tags' in Messy sheet are not consistent (SiteID vs SITE_ID), but it should help you get started.
I have a LibreOffice Calc spreadsheet that uses some conditional formatting of cells. I would like to copy it into Writer as a table. The colours/formats of the cells should remain as they were due to the conditional formatting in Calc. Unfortunately when I do that, the formatting vanishes.
How can I copy it keeping the formatting?
Of course the Writer version no longer has to be conditional, but I need to keep current colours.
My work is done so eventually I can do the trick in Calc first (abandon the "conditional" part, and just preserve the formatting as - is). However due to amount of data I would prefer not to do it manually.
Is macro the only way to do that?
Use Insert -> Object -> OLE Object
Choose Create from file
Pick the right .ods file.
If you want to modify further (in my case - I need to create many tables from one spreadsheet as the original file is humongous - up to CL column) - do not tick "Link to the file" option.
After pressing OK, the spreadsheet is inserted as is (cloned and embedded), with the conditional formatting. Can be further modified (e.g. rows/cols can be deleted, hidden or whatever is needed). The conditional formatting remains active.
I personally prefer to copy as an image. This ensures the format is always exactly as it was in the spreadsheet and that no weird OLE/DDE links go wrong.
However, you specifically ask for a table. For that there are three (or 2.5) options:
Insert the entire as spreadsheet as an object. In Windows that can be done as Ister describes in his answer. This will be editable as an inline mini-sheet (Writer will invoke Calc for any editing actions).
Insert a part of the sheet as an object: Select what you want in the document, copy to the clipboard, go to Writer and select Edit->Paste Special. Then select the OLE option, or if on Linux, select "calc8". This will be editable as an inline mini-sheet.
Insert as HTML. This creates a standalone table. Formatting will not be 100% as in the sheet, as fonts, etc, will be reset by Writer, but it is a native Writer table that you can manipulate in Writer without invoking Calc. Colors, etc, are preserved.
If you use any of the object embedding options, you'll notice that formulae are kept intact (when not referring the data outside the pasted sheet or region). If you want all the data to be verbatim, then you need an intermediate step:
Select the data in your original sheet that you wish
Copy to the clipboard
Create a new sheet and place the cursor in the same spot as the first cell of the copied data (e.g. if your copied region is B4:X99, then place the cursor in B4 of the new sheet)
Select Edit->Paste Special
In the Paste Special window, check only the following options and click OK:
Text
Numbers
Date & Time
Formats
i am trying to take a cell range from excel and copy it to powerpoint2010. However I do not want to use the Embedded format but rather the KeepSourceFormatting one. I tried the following command
ActiveWindow.View.PasteSpecial DataType:=ppPasteOLEObject, Link:=msoFalse
but this still creates an object that launches excel to edit the contents.
basically I want to paste a table of formated data from excel to powerpoint and maintain its appearance but still be able to edit the contents in powerpoint.
any ideas?
There are following options for DataType:
ppPasteEnhancedMetafile which allows edition each of separate field of the table (rather pure solution)
ppPasteMetafilePicture similar option
ppPasteOLEObjectwhich you know
I can't see any other option.