I am using following query
select distinct throttle_id, array_accum(param) over (partition by throttle_id) as script_exclude from throttle_data where exclude = 't' and valve_type = 513 and throttle_id = 1270571881
and I'm getting null value in script_exclude field
Sample values I have in param column is,
airfare/pricing/launch_0tc.wql airfare/pricing/launch_0xp.wql airfare/pricing/launch_0xp_down.wql airfare/pricing/launch_0xp_up.wql
No.of rows is 351.
Please advice how could I get these all value.
Regards,
Sachin Jain
Try the following instead:
select throttle_id, array_agg(param) as script_exclude
from throttle_data where exclude = 't'
and valve_type = 513 and throttle_id = 1270571881
group by throttle_id;
If that still returns null then try:
select * from throttle_data
WHERE exclude = 't'
and valve_type = 513 and throttle_id = 1270571881;
To see what is actually aggregated.
If that doesn't return any rows, then something is wrong with your criteria in your where clause.
Related
I am working with the JSON_VALUE function and I need a kind of dynamic query
I have a column called Criteria and sometimes it has 1 value but sometimes it has 2 or 3 vales like:
Example of 1 value: $.IRId = 1
Example of 2 values: $.IROwner = 'james.jonson#domain.com' AND DaysTillDue < 10
So in order to read the values from a JSON column and taking the Criteria column I am using this logic:
DECLARE #CriteriaValue int
,#CriteriaStatement VARCHAR(50)
SELECT #CriteriaValue=SUBSTRING(Criteria, CHARINDEX('=',Criteria)+1, len(Criteria)) FROM #SubscriptionCriteria;
SELECT #CriteriaStatement= SUBSTRING(Criteria,0, CHARINDEX('=',Criteria)) FROM #SubscriptionCriteria;
SELECT #CriteriaValue,#CriteriaStatement
SELECT *
FROM [SAAS].[ObjectEvent]
WHERE
JSON_VALUE(JSONMessageData, #CriteriaStatement) = #CriteriaValue
That SQL code is taking only the Criteria Column with only 1 value ($.IRId = 1), but the idea is to have something that reads the criteria no matter the different filters and apply them into the final query. The idea I have is that the query would look like this:
SELECT *
FROM [SAAS].[ObjectEvent]
WHERE
JSON_VALUE(JSONMessageData, #CriteriaStatement1) = #CriteriaValue1 ADN JSON_VALUE(JSONMessageData, #CriteriaStatement2) = #CriteriaValue2 AND
JSON_VALUE(JSONMessageData, #CriteriaStatement3) = #CriteriaValue3
ETC
Any suggestion?
i want to get the number of rows returned by a query in Yii. This is my query :
$programsAlreadyExist = $connection->createCommand('
SELECT *
FROM `cat_programme`
WHERE `programme_code` = 513')
->queryAll();
The "COUNT" keyword should return a row containing the requested number. :-)
SELECT COUNT(*) FROM cat_programme WHERE programme_code = 513
Change the SELECT to:
SELECT count (*) FROM cat_programme WHERE programme_code = '513'
Thanks !!
You could also do if via the count() method
For ecample
$programsAlreadyExist = MyModel::find()
->where(['programme_code' => '513'])
->count();
I faced the following requirement. The following query is called by a procedure. The value p_pac_code is the input parameter of the procedure.
The requirement is the query should have an additional condition sp_sbsp.SUBSPCLTY_CODE!='C430 if the p_pac_code value is '008'.
For any other p_pac_code value, it should run as it is below. Is there way to do this by adding an additional condition in the WHERE clause?
As for now, I have done this using IF.....ELSE using the query two times separately depending on p_pac_code value. But I am required to find a way to do with just adding a condition to this single query.
SELECT ptg.group_cid
FROM PRVDR_TYPE_X_SPCLTY_SUBSPCLTY ptxss,
PT_X_SP_SSP_STATUS pxsst ,
pt_sp_ssp_x_group ptg,
group_x_group_store gg,
specialty_subspecialty sp_sbsp,
treatment_type tt,
provider_type pt
WHERE
pt.PRVDR_TYPE_CODE = ptxss.PRVDR_TYPE_CODE
AND tt.TRTMNT_TYPE_CODE = pxsst.TRTMNT_TYPE_CODE
AND ptxss.PRVDR_TYPE_X_SPCLTY_SID = pxsst.PRVDR_TYPE_X_SPCLTY_SID
AND tt.TRTMNT_TYPE_CODE = p_pac_code
AND TRUNC(SYSDATE) BETWEEN TRUNC(PXSST.FROM_DATE) AND TRUNC(PXSST.TO_DATE)
AND ptg.prvdr_type_code =ptxss.prvdr_type_code
AND ptg.spclty_subspclty_sid = ptxss.spclty_subspclty_sid
AND ptxss.spclty_subspclty_sid = sp_sbsp.spclty_subspclty_sid
AND ptg.spclty_subspclty_sid = sp_sbsp.spclty_subspclty_sid
AND ptg.status_cid = 2
AND ptg.group_cid = gg.group_cid
AND gg.group_store_cid = 16
AND gg.status_cid = 2;
Thanks in advance.
You can simply add a condition like this:
... and (
( sp_sbsp.SUBSPCLTY_CODE!='C430' and p_pac_code = '008')
OR
NVL(p_pac_code, '-') != '008'
)
This can be re-written in different ways, this one is quite self-explanatory
Just add:
AND NOT ( NVL( sp_sbsp.SUBSPCLTY_CODE, 'x' ) = 'C430'
AND NVL( p_pac_code value, 'x' ) = '008' )
to the where clause.
The NVL function is used so that it will match NULL values (if they exist in your data); otherwise, even though NULL does not match C430 you will still find that NULL = 'C430' and NULL <> 'C430' and NOT( NULL = 'C430' ) will all return false.
Quite easy. Add the following condition:
AND (sp_sbsp.SUBSPCLTY_CODE != 'C430' OR p_pac_code value != '008')
(don't forget the parenthesis)
Just sharing
SELECT ptg.group_cid
FROM PRVDR_TYPE_X_SPCLTY_SUBSPCLTY ptxss
WHERE
pt.PRVDR_TYPE_CODE = ptxss.PRVDR_TYPE_CODE
&&((tt.TRTMNT_TYPE_CODE = pxsst.TRTMNT_TYPE_CODE)
or (tt.TRTMNT_TYPE_CODE = pxsst.TRTMNT_TYPE_CODE))
just use the parenthesis to specify where the conditionmust implement.
I have a difficulty because when comparing two fields in a subquery, although the fields are identical i.e. they both have NULL values, the comparison returns a FALSE result
Therfore NULL = NULL is returning FALSE
Now I know that NULLs are supposed to be compared with the IS operator, however when I compare two fields how am I supposed to know they contain a null? I need to compare two fields for identical data both if the values are NULL or not.
Consider this SQL:
SELECT
*
FROM
fts.fts_customers_data_50360001
WHERE
fts.fts_customers_data_50360001.record_type = 15
AND
fts.fts_customers_data_50360001.mid = 103650360001
AND NOT EXISTS
(
SELECT
fts.temp_fees_50360001.record_type
FROM
fts.temp_fees_50360001
WHERE
fts.temp_fees_50360001.record_type = fts.fts_customers_data_50360001.record_type
AND
fts.temp_fees_50360001.merch_id = fts.fts_customers_data_50360001.mid
AND
fts.temp_fees_50360001.fee_curr = fts.fts_customers_data_50360001.currency
AND
fts.temp_fees_50360001.card_scheme = fts.fts_customers_data_50360001.card_scheme
AND
fts.temp_fees_50360001.tran_type = fts.fts_customers_data_50360001.fee_type
AND
fts.temp_fees_50360001.area = fts.fts_customers_data_50360001.region
AND
fts.temp_fees_50360001.srvc_type = fts.fts_customers_data_50360001.card_type
);
In the query above,
fts.temp_fees_50360001.card_scheme = fts.fts_customers_data_50360001.card_scheme
both have NULL values inside but the comparison returns false .. too bad
ANY IDEAS WOULD BE MUCH APPRECIATED
As the others have pointed out, NULL cannot be compared with NULL.
In Postgres you can shorten your expressions by using the operator IS DISTINCT FROM which is a null-safe replacement for <>. In your case you'd need to use IS NOT DISTINCT FROM to compare for equality (looks a bit the wrong way round but unfortunately there is no corresponding IS EQUAL TO defined in the SQL standard).
From the manual:
Ordinary comparison operators yield null (signifying "unknown"), not true or false, when either input is null. For example, 7 = NULL yields null, as does 7 <> NULL. When this behavior is not suitable, use the IS [ NOT ] DISTINCT FROM constructs:
So, instead of
(fts.temp_fees_50360001.record_type = fts.fts_customers_data_50360001.record_type
OR (fts.temp_fees_50360001.record_type IS NULL
AND fts.fts_customers_data_50360001.record_type IS NULL)
)
you can use:
(fts.temp_fees_50360001.record_type IS NOT DISTINCT FROM fts.fts_customers_data_50360001.record_type)
to handle NULL values automatically. The condition looks a bit strange if you want to compare for equality but it still is quite short.
First of all, use aliases for your tables, your query will be MUCH more readable:
select *
from fts.fts_customers_data_50360001 as d
where
d.record_type = 15 and
d.mid = 103650360001 and
not exists
(
select *
from fts.temp_fees_50360001 as f
where
f.record_type = d.record_type and
f.merch_id = d.mid and
f.fee_curr = d.currency and
f.card_scheme = d.card_scheme and
f.tran_type = d.fee_type and
f.area = d.region and
f.srvc_type = d.card_type
)
As for your question, there's several ways to do this, for example, you can use syntax like this:
...
(
f.card_scheme is null and d.card_scheme is null or
f.card_scheme = d.card_scheme
)
...
Or use coalesce with some value that couldn't be stored in your column:
...
coalesce(f.card_scheme, -1) = coalesce(d.card_scheme, -1)
...
Recently I also like using exists with intersect for this type of comparisons:
...
exists (select f.card_scheme, f.tran_type intersect select d.card_scheme, d.tran_type)
...
Just a side note - you have to be careful when writing queries like this and check query plans to be sure your indexes are used.
In SQL, null is never equal to null. The only way to get a true result for a comparison with null is via the special tests:
IS NULL
IS NOT NULL
In your case, you must cater specifically for the "two nulls" case being considered equal:
AND (fts.temp_fees_50360001.card_scheme = fts.fts_customers_data_50360001.card_scheme
OR (fts.temp_fees_50360001.card_scheme IS NULL
AND fts.fts_customers_data_50360001.card_scheme IS NULL)
)
There's no getting around dealing with it (although there are a few variations).
The following inner SELECT works (but I give no guarantee regarding performance):
SELECT
fts.temp_fees_50360001.record_type
FROM
fts.temp_fees_50360001
WHERE
(fts.temp_fees_50360001.record_type = fts.fts_customers_data_50360001.record_type
OR (fts.temp_fees_50360001.record_type IS NULL AND fts.fts_customers_data_50360001.record_type IS NULL))
AND
(fts.temp_fees_50360001.merch_id = fts.fts_customers_data_50360001.mid
OR (fts.temp_fees_50360001.merch_id IS NULL AND fts.fts_customers_data_50360001.mid IS NULL))
AND
(fts.temp_fees_50360001.fee_curr = fts.fts_customers_data_50360001.currency
OR (fts.temp_fees_50360001.fee_curr IS NULL AND fts.fts_customers_data_50360001.currency IS NULL))
AND
(fts.temp_fees_50360001.card_scheme = fts.fts_customers_data_50360001.card_scheme
OR (fts.temp_fees_50360001.card_scheme IS NULL AND fts.fts_customers_data_50360001.card_scheme IS NULL))
AND
(fts.temp_fees_50360001.tran_type = fts.fts_customers_data_50360001.fee_type
OR (fts.temp_fees_50360001.tran_type IS NULL AND fts.fts_customers_data_50360001.fee_type IS NULL))
AND
(fts.temp_fees_50360001.area = fts.fts_customers_data_50360001.region
OR (fts.temp_fees_50360001.area IS NULL AND fts.fts_customers_data_50360001.region IS NULL))
AND
(fts.temp_fees_50360001.srvc_type = fts.fts_customers_data_50360001.card_type
OR (fts.temp_fees_50360001.srvc_type IS NULL AND fts.fts_customers_data_50360001.card_type))
I have a SP that gives me a lot of hard times.
The sp gets a two parameters #madeByUserId and #reportedByUserId.
I want to have something like:
select * from table
where MadeByUserId = #madeByUserId (if(#reportedByUserID != null) and ReportedByUserID = #reportedByUserID)
Basically I want to make a case in the where clause to include another filter condition based of the null/not null state of the #reportedByUserId
Is that possible?
Thanks a lot,
Radu
Try:
select * from table
where MadeByUserId = #madeByUserId
AND (#reportedByUserID IS null OR ReportedByUserID = #reportedByUserID)
You could use COALESCE.
SELECT *
FROM Table
WHERE MadeByUserId = #madeByUserId
AND ReportedByUserID = COALESCE(#reportedByUserID, ReportedByUserID)
This translates to
if #reportedByUserID is `NOT NULL` then
compare ReportedByUserID with #reportedByUserID
else
compare ReportedByUserID with ReportedByUserID
From MSDN
COALESCE
Returns the first nonnull expression
among its arguments.
Add an if statement
IF (#reportedByUserId IS NOT NULL)
SELECT *
FROM table t
WHERE t.MadeByUserId = madeByUserId etc
I think this will give you what you're after.
IF (#reportedByUser IS NULL)
select * from table
where MadeByUserId = #madeByUserId
ELSE
select * from table
where MadeByUserId = #madeByUserId and ReportedByUserID = #reportedByUserID)